▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[lost.dark]

just want to know why is accuracy so low on zpool (with mpm 2.7.1.4)

https://imgur.com/a/cFndr

[spiroh]

Hello, the following address is showing up as BCH but should be BTC. Any chance you can fix it up?

http://zpool.ca/?address=13aMDda472soR17fiPDdzMHcjruc3rtLn1

Thanks very much!

[tonyio]

Heads up on the BCH.

I have a BTC address that worked, and was previously paid to correctly.
Today, it suddenly "turned into" a BCH address. It appears to be an issue.

[lista@bk.ru]

I already have this message for more than 10 days.

Wallet: CVizZ3nbzqetRcQxsMg2f7p7fq2pUT5WvH
We are short of this currency (23.23542371 CNT). Please STOP your miners and switch to BTC until we find more CNT blocks.
YOU are responsible if you continue to mine for CNT despite this warning.

[mezerwi]

No reply for my L3+

Server URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Worker name: 0x611F2119c37f1185A8434a782723ff59c41xxxxx
Password: c=ETH,scrypt

anything that i do wrong?

[bttalkdim2]

Zpool not pay in ETH

[malthrax]

Is there something wrong or delayed with XVG payout?   

My last payout (2.50614980) from about an hour ago does not show a txid, and has not shown up in my wallet.  All previous payouts went through without issue.

http://zpool.ca/?address=DQfgakpxeJyR89kuzEZ1DVfsFPSQMFD2Nc

This appears to have resolved.  Thanks if you fixed it. 

The whole site is lagging - either due to load, or another DDOS or something.  I'm sure it'll sort itself out eventually, but right now its kind of painful.

[crackfoo]

We're doing some server maintenance on all servers. Will require a reboot of them all. Will stagger them to minimize impact but expect some bumps on stratums and disappearing coin inventory.

[crackfoo]

We're doing some server maintenance on all servers. Will require a reboot of them all. Will stagger them to minimize impact but expect some bumps on stratums and disappearing coin inventory.

All servers patched, updated and rebooted. Mostly everything should be back online aside from a few slow starting wallets.

[cryptominer420]

@crackfoo
If you feel this doesn't belong here just let me know and I will refrain from posting updates here.

zPool Miner Cumulative Updates since last posting here:
Last posting here was version 1.8.1.5 Alpha
Current version is 1.9.0.0
Downloads at https://github.com/Cryptominer937/zPoolMiner/releases

New Driver Requirements:
Nvidia - Newer than 388.31
Not tested on RX Vega (No Cryptonight at zPool anyway)
AMD RX, R7, R9, Redeon HD - Recommend the Blockchain Driver
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

Changes:

• Integrate Legacy GatelessGate, DSTM miners - 0 Fee
• Integrate 13 Algos for nvidia
• • Adds X17, Bitcore, Veltor, Phi, C11, Skein, HSR, Groestl, Myriad-Groestl, Tribius, Polytimos, TimeTravel, Xevan Algorythms
• • • Improved Profitability on all Nvidia 10XX cards Majorly
• Add 11 ccminer Versions
• • Integrate SP-Mod, Alexis-hsr, 2.2, Tpruvot, SkunkKrnlx, Palgin, Nanashi, x11Gost, Xevan, Polytimos, Klaust 8.18 ccminers.
• • • Improved profitability by a estimated 40%
• New 3rd party error correcting json server
• • Automatically sets a coin profitability to 0 if it is disabled or removed by the pool.
• • Stops miner crashing if a algo is removed from the pool
• • Reduces the api load on zpool.ca

Fixes:

• Fixed GatelessGate using the wrong launch parameters
• Increased AMD Benchmarking times to account for Bin generation times
• Removed profit buttons from the settings page as there is no alternative for this provided by zpool.
• Major code cleanup should improve performance.

[Sityl]

Does anyone know how to call api for a pool's 24 hour actual, for example?

I've managed to call api for my earned balance, but not for general pool info.

[lost.dark]

@cryptominer420

it looks simple i will try it thanks

[crackfoo]

@crackfoo
If you feel this doesn't belong here just let me know and I will refrain from posting updates here.

zPool Miner Cumulative Updates since last posting here:
Last posting here was version 1.8.1.5 Alpha
Current version is 1.9.0.0
Downloads at https://github.com/Cryptominer937/zPoolMiner/releases

New Driver Requirements:
Nvidia - Newer than 388.31
Not tested on RX Vega (No Cryptonight at zPool anyway)
AMD RX, R7, R9, Redeon HD - Recommend the Blockchain Driver
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

Changes:

• Integrate Legacy GatelessGate, DSTM miners - 0 Fee
• Integrate 13 Algos for nvidia
• • Adds X17, Bitcore, Veltor, Phi, C11, Skein, HSR, Groestl, Myriad-Groestl, Tribius, Polytimos, TimeTravel, Xevan Algorythms
• • • Improved Profitability on all Nvidia 10XX cards Majorly
• Add 11 ccminer Versions
• • Integrate SP-Mod, Alexis-hsr, 2.2, Tpruvot, SkunkKrnlx, Palgin, Nanashi, x11Gost, Xevan, Polytimos, Klaust 8.18 ccminers.
• • • Improved profitability by a estimated 40%
• New 3rd party error correcting json server
• • Automatically sets a coin profitability to 0 if it is disabled or removed by the pool.
• • Stops miner crashing if a algo is removed from the pool
• • Reduces the api load on zpool.ca

Fixes:

• Fixed GatelessGate using the wrong launch parameters
• Increased AMD Benchmarking times to account for Bin generation times
• Removed profit buttons from the settings page as there is no alternative for this provided by zpool.
• Major code cleanup should improve performance.

this is great. I've added links to your project on the 2nd post of the thread and I'll add them soon to the website etc...

Cheers![/list][/list]

[lost.dark]

@cryptominer420

ok first problem it doesnt show Neoscrypt in algo list how can i add that?

[guytechie]

When using Sniffdog miner (CPU only), it would constantly say Yescrypt is the most profitable by a huge margin.   However, using the batch file method of mining, it would always mine m7m instead.  Basically the pool/site is saying m7m is more profitable.  If you look at the pool status table, it does indeed list m7m on top of Yescrypt.

So who's right?  And why the discrepancy?

PS: I only have m7m and yescrypt in the password, no other algos.  (-p c=BTC, yescrypt, m7m)

[cryptominer420]

@cryptominer420

ok first problem it doesnt show Neoscrypt in algo list how can i add that?

Neoscrypt is currently not there for Nvidia cards as I am troubleshooting the miner used for it. However it is available for AMD cards as i added gatelessgate as it fixed the sgminer neoscrypt problems.

I also now have a discord group setup for the miner. https://discord.gg/QYahvXq

[agente]

Zpool recognize my wallet as BCH but is BTC address. I set up -p c=BTC of course..
Im using nicehash

[cryptominer420]

this is great. I've added links to your project on the 2nd post of the thread and I'll add them soon to the website etc...

Cheers![/list][/list]

Thanks, Been a lot of hours coding but I think it will be worth it for those who enjoy a GUI for monitoring their Rigs.

[cryptominer420]

Looks like Phi is not adjusting vardiff correctly. all the rigs I manage should be at 0.75 but vardiff has them at 0.08 or less. For now I set the diff via d=0.75

[crackfoo]

Looks like Phi is not adjusting vardiff correctly. all the rigs I manage should be at 0.75 but vardiff has them at 0.08 or less. For now I set the diff via d=0.75

seems working on my rig. diff atm is 0.192 and the starting diff for the port is 0.16 so can't be any lower than 0.08.

Mine just adjusted to 0.384 ...