Johosen
Newbie
 Offline
Activity: 5
Merit: 0
|
 |
January 25, 2018, 11:25:35 AM |
|
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz |
|
|
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3654
Merit: 1126
|
|
January 25, 2018, 02:12:01 PM |
|
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz fixed and fixed. |
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
lost.dark
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 25, 2018, 02:15:38 PM |
|
is ltc payment safe? And whats the payment threshold for ltc?
|
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3654
Merit: 1126
|
|
January 25, 2018, 02:45:09 PM |
|
is ltc payment safe? And whats the payment threshold for ltc?
yes, same as the rest. it described on the main page. |
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
SpriterQC
Newbie
Offline
Activity: 29
Merit: 0
|
|
January 25, 2018, 04:18:15 PM |
|
Anybody has leveraged the API to get data from ZPOOL in a Google Sheet? I tried but got lost in the proceed.  I believe though that should I have something to start with I could achieve what I want. Thanks for your support... I was able to get LibreOffice Calc to make an external data link to the WhatToMine.com website. It gives me real-time info without all the stupid flashing pop-ups and extra crap no one wants to see. It's rough going, since I'm not a VB programmer. I had to write some macros to fire when the sheet opens, closes, and updates the highest-paying coin. So this is working in Excel then? Can I have a look at it? Maybe I can leverage this for me and the community. |
|
|
|
|
logon109
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 25, 2018, 04:33:56 PM |
|
I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet. I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.
Thank you in advance!
|
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3654
Merit: 1126
|
|
January 25, 2018, 04:58:36 PM |
|
I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet. I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.
Thank you in advance!
check their blockexplorer for the transaction ID the pool gave you. https://verge-blockchain.info/ |
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
minerbit77
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 25, 2018, 10:37:02 PM |
|
Hi, I am mining HSR right now with ccminer, but on the wallet page I see that I am getting paid with HBC (HomeBlock Coin) that is totally unusable and I don't even got such wallet, why is this happening?
|
|
|
|
|
cornercafe
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 25, 2018, 11:08:02 PM |
|
sounds like LINX probably forked. I'll check into it later, but I'd stop mining using LINX address for now. yup, looks like the dev updated the wallet. It's updated now. payouts should resume when it's synced. I checked again today and those 28+ coins have never reached my Coinomi wallet. |
|
|
|
|
|
pikachuy
|
|
January 26, 2018, 12:13:22 AM |
|
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
|
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1918
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
January 26, 2018, 12:16:38 AM |
|
Hi all, it's from today i'm working on this wallet ( iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME) trying YesScript & 7n7 algo.
I have hase/rate & many exchange
>image removed<
But no one profit on my balance.
Can anyone explain me witch problem can i have pls?
since yesterday all works good.
Thankyou
I see erratic miner connections; very few shares. http://zpool.ca/?address=iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME right now shows a due balance of: 0.01334860 INN So when it hits the required threshold and matches up with the payout schedule, you should get your payment. You need to be patient; lots of different coins take time to mature, then be sent to the exchange, then find a buyer, etc. Things take time =) @crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
are they high density or low density miners? sounds like a stratum proxy on your end may be beneficial for both parties. I have a feeling this may be some fallout from the people with a million low diff miners that flooded from the nicecrash. |
|
|
|
samspaces
Legendary
Offline
Activity: 1454
Merit: 1030
|
|
January 26, 2018, 12:54:08 AM |
|
Is 'renting' coming back any time soon? Really miss the more exotic algo's on miningrigrentals / nicehash.
Cheers
|
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3654
Merit: 1126
|
|
January 26, 2018, 01:17:20 AM |
|
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
I'm really not sure why it would have any problems. There are no limits on stratum, unless I explicitly ban your wallet address, then all your miners get blocked on the firewall. I've have weirdness on my baikals as well, not seeing some of the algo's ports as alive... but, I can telnet to them just fine from the actual miner so I'm really miffed why this happens. I've not setup any automatic limiting that would interfere like this... |
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
myopit
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 26, 2018, 03:01:48 AM |
|
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz fixed and fixed. I have exactly the same problem. It is all shown as BCH , when i use c=BTC.. my wallet 1DWbwAYiXjyDhQE7YoM4uTgZSeB7uK6G6b and 1NM2B5yPr4q3JqyrRp5Hs8xbtGGM8BWmQG , can anyone help? thank you |
|
|
|
|
|
pikachuy
|
|
January 26, 2018, 05:09:26 AM |
|
are they high density or low density miners? sounds like a stratum proxy on your end may be beneficial for both parties. I have a feeling this may be some fallout from the people with a million low diff miners that flooded from the nicecrash.
They are all Baikal x10 miners, and I have set difficulty to 24 for each miner, so it shouldn't be low difficulty spamming shares. @crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
I'm really not sure why it would have any problems. There are no limits on stratum, unless I explicitly ban your wallet address, then all your miners get blocked on the firewall. I've have weirdness on my baikals as well, not seeing some of the algo's ports as alive... but, I can telnet to them just fine from the actual miner so I'm really miffed why this happens. I've not setup any automatic limiting that would interfere like this... Yea, that's why I'm clueless too with the random connections. Just stuck on what else to do because hashrefinery.com and miningpoolhub don't have these issues with my Baikals. If I set all 10 miners to hashrefinery.com, they all connect, same with miningpoolhub. But when I set all 10 to zpool as primary pool, not all 10 connect and some fallback to backup pools, and it's always not the same miner's that are falling back to backup pools too. For example, if I power down all 10 miners, and power them all back up, sometimes different miners can connect to zpool and some doesn't. So it's truely is random with them. Would love to support zpool and set as a main pool. But it's hard to keep track of my miners when some are failing to connect and going to my backup pools. |
|
|
|
|
jagauthier
Newbie
Offline
Activity: 52
Merit: 0
|
|
January 26, 2018, 12:23:05 PM |
|
zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing. Thus, appearing down.
If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank. Yes, it's very annoying.
|
|
|
|
|
Domomo
Newbie
Offline
Activity: 40
Merit: 0
|
|
January 26, 2018, 02:36:35 PM |
|
I have been mining Monoeci without conversion. I didn´t got any coins in the last 24hours.
Checking my balance it says it has been paid out but there is just ... in the field of the transaction on multiple transactions and no transaction id at all.
|
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3654
Merit: 1126
|
|
January 26, 2018, 02:56:41 PM |
|
zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing. Thus, appearing down.
If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank. Yes, it's very annoying.
1 query every 10s is the limit. |
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
Domomo
Newbie
Offline
Activity: 40
Merit: 0
|
|
January 26, 2018, 04:23:39 PM |
|
I have been mining Monoeci without conversion. I didn´t got any coins in the last 24hours.
Checking my balance it says it has been paid out but there is just ... in the field of the transaction on multiple transactions and no transaction id at all.
I will point my miner elsewhere, there is no reason why payout are not arriving for 24h and also yesterday I just got one payout, I´m worried I already lost coins which never arrived due to that failed transactions. |
|
|
|
|
|
