[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[ydem]

Hey guys, i patched the neoscrypt issue myself (until the main coder does the update)

Go inside folder Pools/zpool.ps1 and find the line that sets $Zpool_Host = .... and change it into this : $Zpool_Host = "$Zpool_Algorithm.mine.zpool.ca".ToLower()
Also make sure to cut and paste the line right below $Zpool_Algorithm = ... (since it needs the recent algo found otherwise it messes up)

Save and done, have fun

I'm guessing zpool24h.ps1 is the same, you can do it there aswell if you want

zpool24h.ps1 is all ready correct all other pools.bat is correct just zpool needed a edit

done: download link to fixed version: https://github.com/nemosminer/NemosMiner-v2.2/archive/master.zip

i'll run it through my test rigs and post a new Realease 2.2.2 when i get home from work in around 2hours

Regards
Nemo

Great Thank you, i was just trying to help the community with zpool.ps1 file until you did the fix, nice to know who's the main coder, great app you have, keep up the good work

[1714952007]

1714952007

[1714952007]

1714952007

[1714952007]

1714952007

[jb7032]

So my machine is using the 24 hour version and for whatever reason is mining the second highest algo. Currently mining PHI when Lyra2v2 is higher. Is this as expected?

[minerx117]

So my machine is using the 24 hour version and for whatever reason is mining the second highest algo. Currently mining PHI when Lyra2v2 is higher. Is this as expected?

make sure NemosMiner is closed

double click/run  "ResetProfit.bat"  

then re run should fix that

Regards
Nemo

[guytechie]

So has anyone tested the 24hr vs non-24hr to see which is more profitable?

PS: After editing, I’m getting these errors in my logs and can't connect to mine:

PS>TerminatingError(Invoke-WebRequest): "The remote server returned an error: (522) Origin Connection Time-out."
PS>TerminatingError(ConvertFrom-Json): "Invalid JSON primitive: working."
PS>TerminatingError(ConvertFrom-Json): "Invalid JSON primitive: working."

Is zPool down?

Edit:  zPool is indeed down.

[legendary13]

guys we need your hashrates at ahashpool, zpool is down again! join us!

[guytechie]

guys we need your hashrates at ahashpool, zpool is down again! join us!

Yeah, I'm following you...

I could never get the Nemosminer for MPH working right.  Just using the same Nemosminer v2.2.x I've used for zPool works for ahashpool - and no need to set up an account.  Just edit and run the ahashpool script!  Love it!

[minerx117]

guys we need your hashrates at ahashpool, zpool is down again! join us!

Yeah, I'm following you...

I could never get the Nemosminer for MPH working right.  Just using the same Nemosminer v2.2.x I've used for zPool works for ahashpool - and no need to set up an account.  Just edit and run the ahashpool script!  Love it!

MPH does work well once you have set it up right...

all my test rigs are currently pointing to ahashpool while zpool is down... Nist5 FTW

Regards

Nemo

[minerx117]

What's the difference between the startzpool and startzpool24hr batches?

startzpool uses current estimate and 24 hour estimate price to work out profitability (real time price)

startzpool24hr uses the 24hour Actual price (Actual price over last 24hours)

Regards
Nemo

[minerx117]

Thanks. I just read that a few replies up and was about to delete my post. Is there a way to make it not switch algorithms so frequently. I feel like I'm getting hit with the 2% fee on zpool repeatedly every time I switch algorithms. Is there a negative to this or does it equal out to the same fee over the course of the day?

That is, will there be fewer fees if the miner does not switch algorithms so frequently?

fees are the same switching does not affect fees...

[minerx117]

Thanks for the fast responses. I've found my go-to miner. I've already had three friends switch from a couple other miners since we were trying to find an alternative after the Nicehash hack.

: )

Best Regards
Nemo

[Buguito]

I'm trying to use Nemo on ZPool but when it launches the miners, it cannot be able to determinate the subdomain for zpool, according to each algorithm. So it tries to connect to stratum ".zpool.ca", instead of for example "lbry.zpool.ca".

It is as if the variable $_mine is blank when assinging: $Zpool_Host = "$_mine.zpool.ca" at zpool.ps1

Any help appreciated.

[sundownz]

guys we need your hashrates at ahashpool, zpool is down again! join us!

Yeah, I'm following you...

I could never get the Nemosminer for MPH working right.  Just using the same Nemosminer v2.2.x I've used for zPool works for ahashpool - and no need to set up an account.  Just edit and run the ahashpool script!  Love it!

I switched over all my stuff to HashRefinery on NEMOS this Saturday with ZPOOL going so crazy lately... had been on ZPOOL for a quite some time & I liked it.

Seems to work well... the first ~16 hours were on par / higher than ZPOOL using the HR pool -- since then the return seems very low (about half what I was used to with ZPOOL)... but being a smaller pool I figure it may have less consistency.

Is there any reason why "ahashpool" would be preferred to HashRefinery ? Maybe I'll have to switch again, haha.

[minerx117]

I'm trying to use Nemo on ZPool but when it launches the miners, it cannot be able to determinate the subdomain for zpool, according to each algorithm. So it tries to connect to stratum ".zpool.ca", instead of for example "lbry.zpool.ca".

It is as if the variable $_mine is blank when assinging: $Zpool_Host = "$_mine.zpool.ca" at zpool.ps1

Any help appreciated.

try this one sorry just made another bug fix, zpool connection issues:

https://github.com/nemosminer/NemosMiner-v2.2.2/releases/download/NemosMiner-v2.2.2/NemosMiner-v2.2.2.7z

i just finished running it through the test rigs all went well, will be a new release very soon v2.2.2

Regards
Nemo  

[minerx117]

guys we need your hashrates at ahashpool, zpool is down again! join us!

Yeah, I'm following you...

I could never get the Nemosminer for MPH working right.  Just using the same Nemosminer v2.2.x I've used for zPool works for ahashpool - and no need to set up an account.  Just edit and run the ahashpool script!  Love it!

I switched over all my stuff to HashRefinery on NEMOS this Saturday with ZPOOL going so crazy lately... had been on ZPOOL for a quite some time & I liked it.

Seems to work well... the first ~16 hours were on par / higher than ZPOOL using the HR pool -- since then the return seems very low (about half what I was used to with ZPOOL)... but being a smaller pool I figure it may have less consistency.

Is there any reason why "ahashpool" would be preferred to HashRefinery ? Maybe I'll have to switch again, haha.

i switched from zpool to ahashpool for last 12hours 7 different rigs while zpool was sorting stuff out im still there atm Nist5 is doing very well on ahashpool thanks to Bulwark  BWK
ahashpool is a Very good pool from what i can tell so far : )  very up to date coins and low fees

Best Regards
Nemo

[sundownz]

guys we need your hashrates at ahashpool, zpool is down again! join us!

Yeah, I'm following you...

I could never get the Nemosminer for MPH working right.  Just using the same Nemosminer v2.2.x I've used for zPool works for ahashpool - and no need to set up an account.  Just edit and run the ahashpool script!  Love it!

I switched over all my stuff to HashRefinery on NEMOS this Saturday with ZPOOL going so crazy lately... had been on ZPOOL for a quite some time & I liked it.

Seems to work well... the first ~16 hours were on par / higher than ZPOOL using the HR pool -- since then the return seems very low (about half what I was used to with ZPOOL)... but being a smaller pool I figure it may have less consistency.

Is there any reason why "ahashpool" would be preferred to HashRefinery ? Maybe I'll have to switch again, haha.

i switched from zpool to ahashpool for last 12hours 7 different rigs while zpool was sorting stuff out im still there atm Nist5 is doing very well on ahashpool much better than zpool thanks to Bulwark  BWK
ahashpool is a Very good pool from what i can tell so far : )  very up to date coins and low fees

Best Regards
Nemo

Thanks for the input -- I put my home office rig on "ahashpool" and it does look pretty promising... so I think I may give it a go & swap my rigs over from Hash Refinery.

At least until ZPOOL gets sorted out 

[ydem]

Hey, i just want to know why did you mention the sentence : Enabled: Xevan,Hsr,Phi,Polytimos Algo's? Weren't they already enabled on previous versions? (using Zpool's server)

Also Added: -SelGPU, is this a new command that works for both EWBF + CCminer on bat files?

[minerx117]

Hey, i just want to know why did you mention the sentence : Enabled: Xevan,Hsr,Phi,Polytimos Algo's? Weren't they already enabled on previous versions? (using Zpool's server)

Also Added: -SelGPU, is this a new command that works for both EWBF + CCminer on bat files?

sorry i'll change that for you "ydem" ...

also, No its a old command from 2.2 so i'll remove that sentence for you to...  yes it works for both ewbf and ccminer

Xevan,Hsr,Phi,Polytimos  are enabled on all pools that support them not just zpool...

[minerx117]

NemosMiner-v2.2.2 Zpool / NiceHash / ahashpool / hashrefinery / MiningPoolHub

Download: https://github.com/nemosminer/NemosMiner-v2.2.2/releases/download/NemosMiner-v2.2.2/NemosMiner-v2.2.2.7z

v2.2.2 (tested with 1060's , 1070's , 1070ti's and 1080ti's)
small bug fixes over 2.2.1 (zpool connection fix, miningpoolhub ewbf -selgpu fix)

NemosMiner-v2.2.2 Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners

edit: start.bat

1.change BTC address to yours

2.select how many gpu's you have eg: (1gpu ewbf 0 cc 0) (default 2 gpu ewbf 0 1 cc 0,1) (6gpu ewbf 0 1 2 3 4 5 cc 0,1,2,3,4,5)

3.remove any algos you do not want to mine (default all supported algos enabled)

4.there is a default 5minute per day fee, that can be disabled by changing -Donate 5 to 0

5.run start.bat

note. instruction number 1 : is different for miningpoolhub, you need to change user name and worker name

If you have Windows 7, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

requires Nvidia Driver Newer than 384 for cuda 9

this is a free project feel free to donate be much appreciated:

aaronsace = 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

Best Regards
Nemo

[THBD]

Let me start by saying a big THANK YOU minerx117 for your work, love the program.  Newer to mining, really only used nicehash so it's a bit of a change but I love the information the miner window provides.  My questions as of now are:

How can I check my rigs estimated hourly/daily/weekly/monthly income? and
Is there a line I can change in the batch file to add my alt coin wallets and request payouts in the respective coins rather than straight BTC?

Thank you again!

[minerx117]

Let me start by saying a big THANK YOU minerx117 for your work, love the program.  Newer to mining, really only used nicehash so it's a bit of a change but I love the information the miner window provides.  My questions as of now are:

How can I check my rigs estimated hourly/daily/weekly/monthly income? and
Is there a line I can change in the batch file to add my alt coin wallets and request payouts in the respective coins rather than straight BTC?

Thank you again!

No worrys glad to help

you can check your rigs estimated daily income from the miner window...

times your daily by 7 for weekly income,  
times your daily by 30 for monthly income,
divide your daily by 24 for hourly income,

no there is not...  only supporting pools with btc payouts at the moment

Best Regards
Nemo