[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[StartxPH]

How do I autorun this program?

Whenever I add it to startup, it just stop working....

[Timgt]

I've been using Ahashpool mainly but just tried MPH as a test. I figured I could add ethash as an algorithm but when I do that I don't see it in my list and it never benchmarks like the other algorithms. Can we not use Ethash on MPH with Nemo's?? I thought that use to work?

[millsys]

How do I autorun this program?

Whenever I add it to startup, it just stop working....

add to TASK SCHEDULER as a basic task that starts 15 seconds after anyone logs on

Use AutoLogon if you have a pw set (sysinternals)

[Zybane]

Anyone else mine with a Titan V? Just wondering why my core clock is so much mower mining versus gaming. It's in power state P2, so something else is keeping the core clock low. ~1515 MHz mining, ~1930 MHz gaming.

[Mike011]

And how are you guys doin? 

[Zybane]

Holy hell mind uploading a picture of that hardware setup? You have a whole server room?

[jimmykl]

And how are you guys doin?  

Wha? So much going on. First up you're comparing different pools?

And then that X17 amount… my fastest rig is 105Mh/s and it's showing 57.663USD/day on ahashpool24hr… please explain!

[citrus333]

Hey guys, been using my 970 to mine using nemos miner no problems.  Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm.  Any solutions to this?  Crashes regardless of overclock, underclock, or stock settings.

Try uninstalling any OC apps, doing a DDU then installing the latest nvidia drivers

Thanks for the advice, tried exactly that.  Got rid of GPU Tweak, used DDU, reinstalled latest Nvidia and still crashing on algorithm switch.  Seems like it's only doing it when I'm using OC software though, either GPU Tweak or MSI Afterburner.  I'd be fine not using either while mining, but I like to limit my TDP of my card while mining and I can't do that without OC software as far as I know.

[Zikkson]

I dont know, but do you have disabled firewall? And latest nvidia drivers?

[Max3k]

2.3.1 or 2.4 will  be focused on
no change to the "algorithm calculation of profit"...

A few weeks tested "Ahash", if use the values of 24hr, the final result is almost 2 times lower than the estimated values, with the same "Hashrefinery", the difference is much less. Nemo, please, think how to fix it, especially when the pool gives overestimated values. Or in the algorithm add the possibility of making an adjustment of the values, where could cut half of the garbage. At certain moments, even NiceHash is paying 2 times more than all of these pools, but I did not earn these coins.

[HardBlockMiner]

This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.

I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.

It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work.  It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots.  As soon as the 4th card is added with power to it it just won't start.

I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram.  I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.

[holda29]

Hi, I am unable to benchmark on 2.4 and 2.4.1 it only says Sleep 240 sec and after 240 secs. it starts over and over. Miner is running all the time correctly.
Above that it does not show all algos specified in config (running on nicehash).
Thanks

Code:

   Type: NVIDIA

Miner            Algorithm        Speed     mBTC/Day      BTC/Day      USD/Day BTC/GH/Day Pool
-----            ---------        -----     --------      -------      ------- ---------- ----
ccminerpolytimos Lyra2RE2  Benchmarking Benchmarking Benchmarking Benchmarking    0,00909 nicehash-
ccminerpolytimos Nist5     Benchmarking Benchmarking Benchmarking Benchmarking    0,00457 nicehash-
ccminerpolytimos Keccak    Benchmarking Benchmarking Benchmarking Benchmarking    0,00038 nicehash-
ccminerpolytimos Lbry      Benchmarking Benchmarking Benchmarking Benchmarking    0,00014 nicehash-


Running:

    Speed Started  Active   Cnt  Command
    ----- -------  ------   ---  -------
0,00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 38YuKbJVpq5oJ4fVPQ9sHmMJqLH9PMDY38.NemosMinerv2.4 -p x -d 0,1,2,3,4,5,6,7


--------------------------------------------------------------------------------
Last Refresh: 01/21/2018 10:26:16
Sleep 240 sec
--------------------------------------------------------------------------------
Running:

    Speed Started  Active   Cnt  Command
    ----- -------  ------   ---  -------
0,00 PH/s 00:00:04 00:00:04 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 38YuKbJVpq5oJ4fVPQ9sHmMJqLH9PMDY38.NemosMinerv2.4 -p x -d 0,1,2,3,4,5,6,7


--------------------------------------------------------------------------------
Last Refresh: 01/21/2018 10:30:16
Sleep 240 sec

[Boffinboy24]

After the first miner starts it stays here and nothing happens. Any idea why? https://ibb.co/gJFXPG

edit: I tried to embed this a million times and can't figure it out, I understand if you don't wanna look. It's to an image hosting site with the pic called ImgBB

What cards do you have? If you have older than 10 series a number of algos won’t work. So you need to disable them, or for some lower the intensity in the respective miner .ps1 files

[Lambosonthemoon]

http://i68.tinypic.com/34zzn95.jpg

And how are you guys doin? 

Jumpin Jesus!

[jimmykl]

This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.

I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.

It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work.  It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots.  As soon as the 4th card is added with power to it it just won't start.

I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram.  I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.

Have you changed BIOS settings for mining? e.g. 'BIOS Above 4G Decoding' is enabled, PCIE speed set to 'Gen 1'

[jimmykl]

Hey guys, been using my 970 to mine using nemos miner no problems.  Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm.  Any solutions to this?  Crashes regardless of overclock, underclock, or stock settings.

Try uninstalling any OC apps, doing a DDU then installing the latest nvidia drivers

Thanks for the advice, tried exactly that.  Got rid of GPU Tweak, used DDU, reinstalled latest Nvidia and still crashing on algorithm switch.  Seems like it's only doing it when I'm using OC software though, either GPU Tweak or MSI Afterburner.  I'd be fine not using either while mining, but I like to limit my TDP of my card while mining and I can't do that without OC software as far as I know.

Are you the latest version e.g. Afterburner 4.4.2?

It's not as convenient as AB but you could use nvidia-smi to set TDP from the commandline: http://cryptomining-blog.com/7410-monitor-and-control-your-nvidia-gpus-while-mining/ If it works you can make a bat file to run the settings.

[pttrade]

Hello all,

I'm kinda a noobie at this stuff. Any idea why before the update the main Nemos CMD window would come up in addition to the miner.exe that was mining,
and since the update I'm only getting the main Nemos window with all of the stats and it says its running at 0:00 for everything for x17 algorithm, but no
miner.exe or second cmd window pops up? Any help would be appreciated!

Edit: I can see the miner open for a split second, then it immediately closes. I shut off antivirus and windows defender, hmm.

Copy  the command from the main window.
ex: "Bin\NVIDIA-Alexis78\ccminer-alexis.exe -a x17 -o stratum+tcp://x17.mine.ahashpool.com:3737 -u [you wallet addres]-p ID=rig1,c=BTC -i 21 -d 0,1,2,3,4,5 --api-remote"

Open a new command line and got to nemosminer folder
paste the command and hit return
You should be able to see the error returned by the miner

[Mike011]

This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.

I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.

It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work.  It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots.  As soon as the 4th card is added with power to it it just won't start.

I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram.  I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.

Have you changed BIOS settings for mining? e.g. 'BIOS Above 4G Decoding' is enabled, PCIE speed set to 'Gen 1'

Have you installed the drivers for your specific model of mobo? Win 10 does not do exactly everything for you

[primo1983]

http://i68.tinypic.com/34zzn95.jpg

And how are you guys doin? 

what configuration do you use to run zpool and ahashpool?

[Mike011]

And how are you guys doin?  

Wha? So much going on. First up you're comparing different pools?

And then that X17 amount… my fastest rig is 105Mh/s and it's showing 57.663USD/day on ahashpool24hr… please explain!

This was a glitch or something, lasted for 5-10 minutes at most, so i had to take a screenshot to have something to drool over and do some quality trolling. Of course it is not real. Taken on one of my rigs (6x1080ti).

edit: ss taken few weeks ago.