[ANN][XCN] Cryptonite - NEW Thread | 1st mini-blockchain coin | Bounties!

[megainarmy]

Can you check the NAT rule in some way, using another protocol for example...

Thanks for that remark. We set up, thanks to a friend who understands this, virtual servers in the router and it all worked.

...My miner reports at least 30 000 000 per GTX 1080 Ti....

What a miner programm reports speed 30 MH on GTX 1080 Ti card ?

My miner reports 26 MH - maximum! I use this miner - https://github.com/djm34/ccminer-msvc2015/releases.
Others, unfortunately, I not found (((

If it is not difficult for you, give a link to this miner, or share the binar for windows, please...


p.s.:
And I appeal to all members of the forum, who have a binary the pallas miner for Windows - please share, if you do not mind.
Thank's!

[nu1mlock]

What a miner programm reports speed 30 MH on GTX 1080 Ti card ?

My miner reports 26 MH - maximum! I use this miner - https://github.com/djm34/ccminer-msvc2015/releases.
Others, unfortunately, I not found (((

If it is not difficult for you, give a link to this miner, or share the binar for windows, please...

It's an optimized version of ccminer by sp_. You can purchase it directly from him if you want it. Most of my cards get 31-32MH/s. I could probably overclock them some more but not a lot.

[megainarmy]

In my purse a few of such blocks.
Written, generated, but not confirmed. What does it mean ?

http://prntscr.com/fuwy7q

[nu1mlock]

In my purse a few of such blocks.
Written, generated, but not confirmed. What does it mean ?

This is your answer:

I would also like it explained why SOME blocks are added to my transactions as "generated buy not accepted" while MOST aren't?

blocks rejected by the wallet (reported by the miner) are stale, i.e. the miner solved a block but the wallet received a new block meanwhile (this should be attenuated by "-s 2").
or, as it's called by sgminer, "hardware error" (nonce does not verify).

[e6ug]

If XCN survives this time, it most definitely has more lives than a cat, maybe even more than Mario 

Any news for a new pool?  If ocminer refuses to help XCN survive, maybe we can track down catia, or the the old 1GH crew? 

Bitfreak, we know you still love your baby, please come back 
 

[pallas]

If XCN survives this time, it most definitely has more lives than a cat, maybe even more than Mario 

Any news for a new pool?  If ocminer refuses to help XCN survive, maybe we can track down catia, or the the old 1GH crew? 

Bitfreak, we know you still love your baby, please come back 

Me and another couple guys have been working on the pool code together for some days, I think we are almost there.
You can follow the development on the slack channel.

[megainarmy]

One more question...

There is another problem. Started mining on 3 rigs in 1 wallet over internet to static IP.
After 6-8 hours miner shows the speed, like everything is normal,
but I see that the temperature of the card dropped to idle temperature.
I go to afterburner consumption of the GPU - there is a strange graph...jumps from 0 to 50-60. (in attachment file)
Well, the load GPU is zero. What can it happen ?
Restarting the miner doesn't help and needed to restart the wallet. Maybe someone came across )))

In image - left graph - normal mining, near the middle graph goto wrong mode...
Temperature in normal mining about 60 C
Temperature in wrong mode about 40 C

http://prntscr.com/fv2xoc

Restarting the miner doesn't solve the problem:

http://prntscr.com/fv37rv

[pallas]

One more question...

There is another problem. Started mining on 3 rigs in 1 wallet over internet to static IP.
After 6-8 hours miner shows the speed, like everything is normal,
but I see that the temperature of the card dropped to idle temperature.
I go to afterburner consumption of the GPU - there is a strange graph...jumps from 0 to 50-60. (in attachment file)
Well, the load GPU is zero. What can it happen ?
Restarting the miner doesn't help and needed to restart the wallet. Maybe someone came across )))

In image - left graph - normal mining, near the middle graph goto wrong mode...
Temperature in normal mining about 60 C
Temperature in wrong mode about 40 C

http://prntscr.com/fv2xoc

Restarting the miner doesn't solve the problem:

http://prntscr.com/fv37rv

that's because the wallet is busy and doesn't respond quickly enough when a new getwork call is made by the miner.
one of the reasons to try higher values for "-s".

[megainarmy]

that's because the wallet is busy and doesn't respond quickly enough when a new getwork call is made by the miner.
one of the reasons to try higher values for "-s".

Thank's. Ok. I'll trying -s 3 in mainer 

[boerse29]

One more question...

There is another problem. Started mining on 3 rigs in 1 wallet over internet to static IP.
After 6-8 hours miner shows the speed, like everything is normal,
but I see that the temperature of the card dropped to idle temperature.
I go to afterburner consumption of the GPU - there is a strange graph...jumps from 0 to 50-60. (in attachment file)
Well, the load GPU is zero. What can it happen ?
Restarting the miner doesn't help and needed to restart the wallet. Maybe someone came across )))

In image - left graph - normal mining, near the middle graph goto wrong mode...
Temperature in normal mining about 60 C
Temperature in wrong mode about 40 C

http://prntscr.com/fv2xoc

Restarting the miner doesn't solve the problem:

http://prntscr.com/fv37rv

that's because the wallet is busy and doesn't respond quickly enough when a new getwork call is made by the miner.
one of the reasons to try higher values for "-s".

I found that the wallet sets itself as background priority after some time. I can't determine what is triggering it. Changing priority back to normal doesn't stick most of the time - it changes back to background. This is the reason for up and down gpu usage provided in the screenshot of @megainarmy in my case.
The msvcrt.dll module giving out high constant cpu usage, it might have a logic loop but again I'm not a developer.
Btw the wallet doesn't seem to work on Windows 10 from my experience, only Windows 7. I try both the qt and cryptonited. Cryptonited > qt buggy shit. Both are "buggy" but qt is even worse from a user standpoint. Any ideia why pallas?

[pallas]

you must ask bittfreak, I'm no windows expert.

[antantti]

Btw the wallet doesn't seem to work on Windows 10 from my experience, only Windows 7. I try both the qt and cryptonited. Cryptonited > qt buggy shit. Both are "buggy" but qt is even worse from a user standpoint. Any ideia why pallas?

I have been running it on W10 for months now. Once every 3-4 weeks it just hangs, typically "three days behind", and only way to get it synced is to download the latest snapshot.

Also sometimes it starts to use cpu for longer periods, about 30% on i5. I am testing it right now with connections limited to 25, looking good so far.

90% of my found blocks are accepted, 10% are "generated but not accepted".

edit: wallet is running but cpu load again 29% with i5-4690...

[megainarmy]

... the wallet doesn't seem to work on Windows 10 from my experience, only Windows 7...

My wallet working now on win 7... And it's have this trouble.
What I need to do to stable the wallet on win 7 ? Change priority (Real time, hi, standart) ? Or anything else?
Thank's for reply )

[mak013]

Hi all!

Mining on 2 rigs solo. Changed miner and can`t understand. 1 rig - ok, another shows:

[2017-07-13 15:25:44] accepted: 0/1 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/2 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/3 (0.00%), 4196691 kh/s NO
[2017-07-13 15:25:44] accepted: 0/4 (0.00%), 2093266 kh/s NO
....

and close itself.
PL - 100, CC, MC - 0.

Anyone knows what it can be?

Both rigs - Win10.

[Burmik123]

Where I can ask some questions to devs? Maybe slack or telegram? Of just ask here.

[abudfv2008]

Is it possible to mine on the pool? Somebody is mining on suprnova(at least there is some hashrate), but I get errors after several successful shares:
Stratum connection interrupted
Stratum connection failed: Failed to connect to xcn.suprnova.cc port 8008: Connection refused

[pallas]

Where I can ask some questions to devs? Maybe slack or telegram? Of just ask here.

Here or on slack.

[pallas]

Hi all!

Mining on 2 rigs solo. Changed miner and can`t understand. 1 rig - ok, another shows:

[2017-07-13 15:25:44] accepted: 0/1 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/2 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/3 (0.00%), 4196691 kh/s NO
[2017-07-13 15:25:44] accepted: 0/4 (0.00%), 2093266 kh/s NO
....

and close itself.
PL - 100, CC, MC - 0.

Anyone knows what it can be?

Both rigs - Win10.

hashrate is not good, you must have some cuda issue. what cards?

[jukKas]

Nice project. Will investigate mini blockchain concept more.

[mak013]

Hi all!

Mining on 2 rigs solo. Changed miner and can`t understand. 1 rig - ok, another shows:

[2017-07-13 15:25:44] accepted: 0/1 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/2 (0.00%), 4773 kh/s NO
[2017-07-13 15:25:44] accepted: 0/3 (0.00%), 4196691 kh/s NO
[2017-07-13 15:25:44] accepted: 0/4 (0.00%), 2093266 kh/s NO
....

and close itself.
PL - 100, CC, MC - 0.

Anyone knows what it can be?

Both rigs - Win10.

hashrate is not good, you must have some cuda issue. what cards?

4*1060, 1*1080Ti
It starts, very fast send about 2-3 hundreds such lines, few seconds thinks, amd closes