|
EvilMonkey
|
 |
June 10, 2017, 10:35:33 AM |
|
Did anyone else have a terrible day mining skein today zpool? my numbers on my watercooled rig is not exactly making sense.... based on numbers from 23hrs ago to now, i seem to only pulled in like $12.53 today on zpool with my pair of MSI 1080ti's..... I still have my 2nd pc on Yiimp mining away DGB... The numbers on it are making more sense... Could someone explain to me the system they have listed on pools at the right side of the page...... trying to understand the numbers better...  if i run my numbers if i am understanding it.. 0.00395x1800=7.11mBTC/day or $20.16USD? yeh over the last 8 hours I got 15-20 less than usual over an 8 hour period. Again I see the graph has stopped. Its been showing nothing for hte last 2 hours. And the other stats shows 1 miner no hash rate. I restarted the batch file and it is now showing my hash rate. Too early to see if the graph is starting again. I will mine other 8 hours and see if it plays catch up. But yer not impressed with zpool in the last 4 days. |
|
|
|
|
|
EvilMonkey
|
|
June 10, 2017, 10:52:11 AM |
|
Did anyone else have a terrible day mining skein today zpool? my numbers on my watercooled rig is not exactly making sense.... based on numbers from 23hrs ago to now, i seem to only pulled in like $12.53 today on zpool with my pair of MSI 1080ti's..... I still have my 2nd pc on Yiimp mining away DGB... The numbers on it are making more sense... Could someone explain to me the system they have listed on pools at the right side of the page...... trying to understand the numbers better... if i run my numbers if i am understanding it.. 0.00395x1800=7.11mBTC/day or $20.16USD? yeh over the last 8 hours I got 15-20 less than usual over an 8 hour period. Again I see the graph has stopped. Its been showing nothing for hte last 2 hours. And the other stats shows 1 miner no hash rate. I restarted the batch file and it is now showing my hash rate. Too early to see if the graph is starting again. I will mine other 8 hours and see if it plays catch up. But yer not impressed with zpool in the last 4 days. Ok interestingly restarting the batch file made the graph start recording correctly again. |
|
|
|
|
|
flminer
|
|
June 10, 2017, 11:35:32 AM |
|
Did anyone else have a terrible day mining skein today zpool? my numbers on my watercooled rig is not exactly making sense.... based on numbers from 23hrs ago to now, i seem to only pulled in like $12.53 today on zpool with my pair of MSI 1080ti's..... I still have my 2nd pc on Yiimp mining away DGB... The numbers on it are making more sense... Could someone explain to me the system they have listed on pools at the right side of the page...... trying to understand the numbers better... if i run my numbers if i am understanding it.. 0.00395x1800=7.11mBTC/day or $20.16USD? yeh over the last 8 hours I got 15-20 less than usual over an 8 hour period. Again I see the graph has stopped. Its been showing nothing for hte last 2 hours. And the other stats shows 1 miner no hash rate. I restarted the batch file and it is now showing my hash rate. Too early to see if the graph is starting again. I will mine other 8 hours and see if it plays catch up. But yer not impressed with zpool in the last 4 days. I was having that problem for over a week and got tired of it so switched to MPH mining DGB. About to switch to NH with the drop in DGB price drop though. Ok interestingly restarting the batch file made the graph start recording correctly again. |
|
|
|
|
|
EvilMonkey
|
|
June 10, 2017, 11:39:40 AM |
|
Got stratum errors. REstared the batch file seems ok again. Nope still getting... not liking this at all.
|
|
|
|
|
philipma1957 (OP)
Legendary
 Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
June 10, 2017, 11:51:40 AM |
|
|
|
|
|
|
EvilMonkey
|
|
June 10, 2017, 12:03:35 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? |
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
June 10, 2017, 12:20:37 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. |
|
|
|
|
LoneRangir
|
|
June 10, 2017, 01:43:25 PM |
|
Anyone know how to turn down the core voltage on a 1070? Afterburner only allows a positive change, the slider does not go to the negative territory like it does for an AMD card.
|
|
|
|
|
ticmmae
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 10, 2017, 01:55:12 PM |
|
Hey Phill,
How important is it to use identical 1080 ti for 1080 ti+1070 rig? I just cannot find same model as mine in good price at the moment.
|
|
|
|
|
|
Vann
|
|
June 10, 2017, 01:58:13 PM |
|
Anyone know how to turn down the core voltage on a 1070? Afterburner only allows a positive change, the slider does not go to the negative territory like it does for an AMD card.
Setting the power limit lower is effectively the same thing. I use 70% with a GTX 1080 and it drops the power usage ~25% compared to 100% TDP. Anything less than 60% losses too much hash. |
|
|
|
|
|
LoneRangir
|
|
June 10, 2017, 02:03:09 PM |
|
Anyone know how to turn down the core voltage on a 1070? Afterburner only allows a positive change, the slider does not go to the negative territory like it does for an AMD card.
Setting the power limit lower is effectively the same thing. I use 70% with a GTX 1080 and it drops the power usage ~25% compared to 100% TDP. Anything less than 60% losses too much hash. I'm down to 60%, and the voltage is now down below 1.0V. Thanks for the help. |
|
|
|
|
|
flminer
|
|
June 10, 2017, 02:35:38 PM |
|
Got tired of waiting and waiting for people to get picopsu back stock so found a source for them  . They just arrived and will be hooking a couple up to test. Also sourced 8 pin cpu connectors and terminals so I can make cable for them direct from server psu. And placed an order for pcie powered risers without the sata cable (saved a few cents each) from new source as regular source was out. Am glad to finally be getting other sources set so when one is out another will have what I need. |
|
|
|
|
|
LoneRangir
|
|
June 10, 2017, 03:23:02 PM |
|
Hey Phill,
How important is it to use identical 1080 ti for 1080 ti+1070 rig? I just cannot find same model as mine in good price at the moment.
It's not important. You can mix and match. You can even mix AMD and Nvidia, if you can get the drivers to play nice. Usually not worth the effort |
|
|
|
|
|
kopija
|
|
June 10, 2017, 04:00:29 PM |
|
also I use less power with zec and it will be getting hot.
But equihash is more core/memory intensive than ccminer algos. I have to overclock memory to the max for ZEC mining. With ccminer I can downclock memory with no impact on hashrate. So how come you are using less power with ZEC than with ccminer/zpool? |
we are nothing but a smart contracts on a cosmic blockchain |
|
|
|
EvilMonkey
|
|
June 10, 2017, 07:58:27 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. Yep two 8 hour periods. Both down 30% or more than what I usually get from zpool. Switching over to Zec also. I was mining directly to zec wallet using EWBF but want to mine it to the same BTC wallet I am using for my skein mining. Easiest way to do this is to use nicehash? Do you mean the actual program? Or is there a way to continue to use EWBF and just adjust the pool settings? My current bat file. "miner --server zec-us-west1.nanopool.org --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 6666" What do I need to change to switch over to nicehash which converts directly to BTC. (I have already changed my wallet to BTC). Currently googling but not having much luck. |
|
|
|
|
|
Storx
|
|
June 10, 2017, 08:53:23 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. Yep two 8 hour periods. Both down 30% or more than what I usually get from zpool. Switching over to Zec also. I was mining directly to zec wallet using EWBF but want to mine it to the same BTC wallet I am using for my skein mining. Easiest way to do this is to use nicehash? Do you mean the actual program? Or is there a way to continue to use EWBF and just adjust the pool settings? My current bat file. "miner --server zec-us-west1.nanopool.org --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 6666" What do I need to change to switch over to nicehash which converts directly to BTC. (I have already changed my wallet to BTC). Currently googling but not having much luck. The way i mined nicehash previously before going to zpool was using the nicehash miner itself, just put your new BTC wallet in it |
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
|
EvilMonkey
|
|
June 10, 2017, 09:00:53 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. Yep two 8 hour periods. Both down 30% or more than what I usually get from zpool. Switching over to Zec also. I was mining directly to zec wallet using EWBF but want to mine it to the same BTC wallet I am using for my skein mining. Easiest way to do this is to use nicehash? Do you mean the actual program? Or is there a way to continue to use EWBF and just adjust the pool settings? My current bat file. "miner --server zec-us-west1.nanopool.org --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 6666" What do I need to change to switch over to nicehash which converts directly to BTC. (I have already changed my wallet to BTC). Currently googling but not having much luck. The way i mined nicehash previously before going to zpool was using the nicehash miner itself, just put your new BTC wallet in it Yes I am currently doing that but sounded like Philma was doing it some other way. Like you can maybe just use this? stratum+tcp://equihash.usa.nicehash.com:3357 or this stratum+tcp://lbry.usa.nicehash.com:3356? I am just not sure which one is for Zec. |
|
|
|
|
|
xleejohnx
|
|
June 10, 2017, 09:15:11 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. Yep two 8 hour periods. Both down 30% or more than what I usually get from zpool. Switching over to Zec also. I was mining directly to zec wallet using EWBF but want to mine it to the same BTC wallet I am using for my skein mining. Easiest way to do this is to use nicehash? Do you mean the actual program? Or is there a way to continue to use EWBF and just adjust the pool settings? My current bat file. "miner --server zec-us-west1.nanopool.org --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 6666" What do I need to change to switch over to nicehash which converts directly to BTC. (I have already changed my wallet to BTC). Currently googling but not having much luck. The way i mined nicehash previously before going to zpool was using the nicehash miner itself, just put your new BTC wallet in it Yes I am currently doing that but sounded like Philma was doing it some other way. Like you can maybe just use this? stratum+tcp://equihash.usa.nicehash.com:3357 or this stratum+tcp://lbry.usa.nicehash.com:3356? I am just not sure which one is for Zec. It's equilhash for zec |
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
|
EvilMonkey
|
|
June 10, 2017, 09:45:46 PM |
|
So what is the reason for moving to Zcash. I find it a bit tricky to move with so little hashing power right now. Are you shifting most of it becuase Zpool is having issues or what is the reasoN? zpool has been having weird issues. So I will give it a break. also I use less power with zec and it will be getting hot. Yep two 8 hour periods. Both down 30% or more than what I usually get from zpool. Switching over to Zec also. I was mining directly to zec wallet using EWBF but want to mine it to the same BTC wallet I am using for my skein mining. Easiest way to do this is to use nicehash? Do you mean the actual program? Or is there a way to continue to use EWBF and just adjust the pool settings? My current bat file. "miner --server equihash.usa.nicehash.com --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 3357" What do I need to change to switch over to nicehash which converts directly to BTC. (I have already changed my wallet to BTC). Currently googling but not having much luck. The way i mined nicehash previously before going to zpool was using the nicehash miner itself, just put your new BTC wallet in it Yes I am currently doing that but sounded like Philma was doing it some other way. Like you can maybe just use this? stratum+tcp://equihash.usa.nicehash.com:3357 or this stratum+tcp://lbry.usa.nicehash.com:3356? I am just not sure which one is for Zec. It's equilhash for zec Thanks so something like this is probably the way to use EWBF to mine zec and auto change it to BTC with nicehasH? "miner --server equihash.usa.nicehash.com --user 19HD18H6LiKNEPt4paZ6B5RVkwV5Lw3vbp --pass z --port 3357" Sorry I am new and is alot to get my head around. |
|
|
|
|
|
flminer
|
|
June 10, 2017, 09:46:25 PM |
|
Go to the getting started page nicehash.com and put that stratum in your miner with your btc address and run it
|
|
|
|
|
|
