abudfv2008
|
|
September 04, 2017, 07:21:04 AM |
|
What's the best hashrate you can pull with monero cryptonight? Mine does 840 h/s @ 126W 56C +110 clock -500 mem clock with 60x34 launch-config ccminer. People report up to 900 but can't seem to go near the drivers crash if I overclock more.
Cryptonight is not for 1080/ti. 1070 makes 700+H/s. AMD gpu performs even better (Hash/price) Neoscrypt, Ethash (without dual mining) and Cryptonight peforms bad on Gddr5x. Mine with Skein, Nist5, Equihash, Tribus, Skunk, X17, Lyra2v2, Groest, hmq_1725 etc.
|
|
|
|
Moondoggie
|
|
September 04, 2017, 08:41:48 AM |
|
how many magnatum per day do you expect ?
Around 250 / day
|
|
|
|
Rashkae
|
|
September 04, 2017, 09:08:00 AM |
|
how many magnatum per day do you expect ?
Each 1080Ti should get you about 140/day.
|
Did I help you? If yes, hit me up with some Eth! 0xD6422bcFD87989cf04D7dB489B9c18b3cA95886e
|
|
|
Moondoggie
|
|
September 04, 2017, 09:50:45 AM |
|
how many magnatum per day do you expect ?
Each 1080Ti should get you about 140/day. Should change your miner or settings I'm on 245.6 each card for the past 24 hours.
|
|
|
|
universalresonance
|
|
September 04, 2017, 11:35:47 AM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
|
|
|
|
Ancienot
Newbie
Offline
Activity: 27
Merit: 9
|
|
September 04, 2017, 11:48:49 AM |
|
Maybe you had the same problem?: I`m using sniffdog for last couple of days mining skein and from time to time notice strange decrease in hashrate. This image perfectly illustrates the problem, it has started 4 hours ago and still persists. All this time my sniffdog miner shows straight 4.7Gh/s at 5x 1080 ti, while website only sees 1.3Gh/s. Can anyone confirm having this too? I only found posts regarding high reject value, but nothing regarding my case. http://i.piccy.info/i9/085368fc9f045f638ccfe0e9d2b67bc5/1504482479/235452/1176680/5x.jpg
|
|
|
|
Alba
Newbie
Offline
Activity: 61
Merit: 0
|
|
September 04, 2017, 12:06:10 PM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
That's impressive for one card
|
|
|
|
bdiddle
Member
Offline
Activity: 75
Merit: 10
|
|
September 04, 2017, 01:52:39 PM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
Which pools did you use?
|
|
|
|
universalresonance
|
|
September 04, 2017, 05:47:17 PM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
Which pools did you use? Flypool /nano pool for -ZEC the blockfactory for DGB -since I just cannot seem to configure Supernova. I'm a noob.
|
|
|
|
universalresonance
|
|
September 04, 2017, 05:48:04 PM |
|
btw how's everyone doing? lol
BTC being raped and so are other currencies. I'm assuming this would wipe out weak hands from the market now.
|
|
|
|
puwaha
|
|
September 04, 2017, 06:01:04 PM |
|
how many magnatum per day do you expect ?
Around 250 / day Why magnatum? It doesn't even have an exchange yet.
|
|
|
|
lexele
|
|
September 04, 2017, 06:12:39 PM |
|
how many magnatum per day do you expect ?
Around 250 / day Why magnatum? It doesn't even have an exchange yet. Speculation. The day it hits an exchange you can make huge profit (or not).
|
|
|
|
RSO_
Member
Offline
Activity: 63
Merit: 10
|
|
September 04, 2017, 06:26:47 PM |
|
I've been mining SIGT since about block 15k without issue on my 1080 Ti's with various miners. But once I go over to an auto-switching miner such as Nemo's miner or SniffDog miner, I run into an issue with one of my Ti's. Over the weekend I ran my rig on SniffDog without issue until Monday morning I realised one of the cards had stopped running. It was greyed out on Afterburner and just being ignored from the miner, then after a restart it didn't even appear in Afterburner. This has previously happened a couple times before on Nemo's miner.
My thinking is one of the coins it is switching to is triggering my Founder's Edition card to fail and it won't come back until I swap out the USB riser and use a different PCI slot. But then it just happens again. Can anyone suggest what may be triggering this? or is it just a dodgy card?
|
|
|
|
bdiddle
Member
Offline
Activity: 75
Merit: 10
|
|
September 04, 2017, 06:58:04 PM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
Which pools did you use? Flypool /nano pool for -ZEC the blockfactory for DGB -since I just cannot seem to configure Supernova. I'm a noob. I meant with sniffdog
|
|
|
|
abudfv2008
|
|
September 04, 2017, 07:03:09 PM |
|
I've been mining SIGT since about block 15k without issue on my 1080 Ti's with various miners. But once I go over to an auto-switching miner such as Nemo's miner or SniffDog miner, I run into an issue with one of my Ti's. Over the weekend I ran my rig on SniffDog without issue until Monday morning I realised one of the cards had stopped running. It was greyed out on Afterburner and just being ignored from the miner, then after a restart it didn't even appear in Afterburner. This has previously happened a couple times before on Nemo's miner.
My thinking is one of the coins it is switching to is triggering my Founder's Edition card to fail and it won't come back until I swap out the USB riser and use a different PCI slot. But then it just happens again. Can anyone suggest what may be triggering this? or is it just a dodgy card?
Too much OC for that card. It can be stable on Sigt, but fail on ... neoscrypt or else
|
|
|
|
RSO_
Member
Offline
Activity: 63
Merit: 10
|
|
September 04, 2017, 07:58:45 PM |
|
That was my thought the first time round. But it was only clocked to +200/+200. Previously when clocked too much the cards would just restart, not die completely on afterburner. But hopefully you're right. Thanks for the pointer - I might just run it at stock from now to avoid this if possible.
|
|
|
|
universalresonance
|
|
September 04, 2017, 10:10:04 PM |
|
Ran sniffdog miner for a week. (Give or take 8-9 hours) Made around 0.00413077 BTC - I have 1x1080ti currently. lol this is horrible.
I am not saying the miner is bad or card is useless just saying- just mining whatever is bumped up in sky doesn't mean you are being efficient.
I'm sticking with Mining DGB and ZEC and then switching them when they go up 20-30% -so far with that tactic I've maintained 6-8$ a day.
Also, I rather not compare things into USD because that's a losing game lol
Which pools did you use? Flypool /nano pool for -ZEC the blockfactory for DGB -since I just cannot seem to configure Supernova. I'm a noob. With sniffdog it's automatic- MPH , hasrefinery, zpool I meant with sniffdog
|
|
|
|
Brucelats
|
|
September 04, 2017, 10:25:27 PM Last edit: September 04, 2017, 10:47:16 PM by Brucelats |
|
Ok, I bought MSI Gtx 1080Ti Seahawk X for 900 bucks, used one, 2 months old, 2 years 10 months warranty left.
It was cheaper then normal GTX 1080Ti that are new in stores. New ones are like 1050$ lolz.
What clocks do you guys use and which intensity? Right now i have 21.0956 intensity, read somewhere that some guy gets good numbers with it. My power limit is 85%, mem clock is -500 and core clock is +125.
I get 52.5 MH/s with this card.
Any suggestions how to boost this numbers? This is my first Ti so i still need to test things. My other 20x GPU-s are Gtx 1070. Now i slowly upgrade my rigs with Ti's.
Also important question, how do i control my Radiator Fan, how do adjust it on % i want?
I have Asus Rog Strix Z270 Gaming F mobo
Cheers!
|
|
|
|
universalresonance
|
|
September 04, 2017, 11:40:59 PM |
|
Ok, I bought MSI Gtx 1080Ti Seahawk X for 900 bucks, used one, 2 months old, 2 years 10 months warranty left.
It was cheaper then normal GTX 1080Ti that are new in stores. New ones are like 1050$ lolz.
What clocks do you guys use and which intensity? Right now i have 21.0956 intensity, read somewhere that some guy gets good numbers with it. My power limit is 85%, mem clock is -500 and core clock is +125.
I get 52.5 MH/s with this card.
Any suggestions how to boost this numbers? This is my first Ti so i still need to test things. My other 20x GPU-s are Gtx 1070. Now i slowly upgrade my rigs with Ti's.
Also important question, how do i control my Radiator Fan, how do adjust it on % i want?
I have Asus Rog Strix Z270 Gaming F mobo
Cheers!
MSI afterburner app open that then there is a button on it that looks like a gear lever -click on it and then go to "Fan" tab and then adjust the curve according to your preference.
|
|
|
|
woas4
|
|
September 04, 2017, 11:55:04 PM |
|
To all of you who own a 1080ti - can you share your performance mining Vertcoin? Interested in taking a deeper look into it in the future.
Thanks in advance.
|
|
|
|
|