keremthecelikk
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 13, 2017, 11:23:56 AM |
|
neoscrypt is the best right now. but personally I use automated system that checks diff and profit ratio and point my miners to the most profitable altcoin. I get very good results with this strategy.
Are you using one of the known multi miners? If so, which one? I have been thinking about going this route but not looking forward to the down time setting up and testing the various ones. I user hashrefinery and pointed it at Skein only. At 75% TDP I'm getting about 60,000-80,000 satoshi / day I was doing the same until this morning I am not sure if it's correct but it's written on my wallet page that "Note: Minimum payout for this wallet is 1 BTC" which takes years for me to reach this level. I hope they correct this mistake.
|
|
|
|
mutual.consent
Newbie
Offline
Activity: 35
Merit: 0
|
|
November 13, 2017, 11:59:04 AM |
|
neoscrypt is the best right now. but personally I use automated system that checks diff and profit ratio and point my miners to the most profitable altcoin. I get very good results with this strategy.
Are you using one of the known multi miners? If so, which one? I have been thinking about going this route but not looking forward to the down time setting up and testing the various ones. I user hashrefinery and pointed it at Skein only. At 75% TDP I'm getting about 60,000-80,000 satoshi / day I was doing the same until this morning I am not sure if it's correct but it's written on my wallet page that "Note: Minimum payout for this wallet is 1 BTC" which takes years for me to reach this level. I hope they correct this mistake. Can anyone confirm whether it is a 1 BTC payout? Currently on skein on hashrefinery but won't continue if this is true. Sp-mod seems to be the best for skein. Haven't found the best hash to power ratio yet though - I think 50% tdp, +120 core -500 mem is getting me 730 my/s at about 110w.
|
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
November 13, 2017, 12:12:34 PM |
|
neoscrypt is the best right now. but personally I use automated system that checks diff and profit ratio and point my miners to the most profitable altcoin. I get very good results with this strategy.
Are you using one of the known multi miners? If so, which one? I have been thinking about going this route but not looking forward to the down time setting up and testing the various ones. I user hashrefinery and pointed it at Skein only. At 75% TDP I'm getting about 60,000-80,000 satoshi / day That's utter shit, you're better off on BTX, price pumped doing almost $6/day per Ti.
|
|
|
|
oup59
|
|
November 13, 2017, 12:37:00 PM |
|
neoscrypt is the best right now. but personally I use automated system that checks diff and profit ratio and point my miners to the most profitable altcoin. I get very good results with this strategy.
Are you using one of the known multi miners? If so, which one? I have been thinking about going this route but not looking forward to the down time setting up and testing the various ones. I user hashrefinery and pointed it at Skein only. At 75% TDP I'm getting about 60,000-80,000 satoshi / day That's utter shit, you're better off on BTX, price pumped doing almost $6/day per Ti. What hashrate for 1080Ti is considered good for BTX?
|
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
November 13, 2017, 12:38:12 PM |
|
31-34mhs
|
|
|
|
oup59
|
|
November 13, 2017, 12:54:00 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining?
|
|
|
|
Dr_Victor
|
|
November 13, 2017, 01:09:09 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem.
|
yobit.net is banned from signatures
|
|
|
oup59
|
|
November 13, 2017, 01:13:16 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks.
|
|
|
|
|
tpd09
|
|
November 13, 2017, 01:48:43 PM |
|
might be a driver issue - try DDU and reinstall fresh drivers through device manager - all Tis from the same maker?
|
|
|
|
crypsy
|
|
November 13, 2017, 01:49:28 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner .
|
btc: 183ZdPA9c5XkGgacaN9q7aJY93asV2BnKt eth: 0x144c3b9d9c3c6e465d4cfe136d318440e81bb39e
|
|
|
oup59
|
|
November 13, 2017, 01:59:12 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns.
|
|
|
|
notsure85
Member
Offline
Activity: 139
Merit: 10
|
|
November 13, 2017, 02:05:06 PM |
|
Has anyone had success with h81 pro + pcie 1->3 expander + 1080 ti?
I tried it only once, didnt work right away and didnt troubleshoot it further. Want to expand rig now and would need those extra ports.
|
|
|
|
crypsy
|
|
November 13, 2017, 02:12:47 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns. or you can pay SP for the miner and gain 50% more hashing power and forget your concerns
|
btc: 183ZdPA9c5XkGgacaN9q7aJY93asV2BnKt eth: 0x144c3b9d9c3c6e465d4cfe136d318440e81bb39e
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
November 13, 2017, 02:15:51 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns. or you can pay SP for the miner and gain 50% more hashing power and forget your concerns Yeah and ROI in few years.
|
|
|
|
oup59
|
|
November 13, 2017, 02:38:34 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns. or you can pay SP for the miner and gain 50% more hashing power and forget your concerns Although SP version may yield better results, I prefer open source versions as they are generally expensive at the first place.
|
|
|
|
crypsy
|
|
November 13, 2017, 02:51:22 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns. or you can pay SP for the miner and gain 50% more hashing power and forget your concerns Yeah and ROI in few years. are you mining with a calculator ....... even so , in order to make money you need to invest the miner cost .05 btc which is about $330, now tell me can you buy 50% of your rig for that money ? because that is what you will gain ! and for the same power consumption . i did save you a lot of money so buy me a beer btc 183ZdPA9c5XkGgacaN9q7aJY93asV2BnKt eth 0x144c3b9d9c3c6e465d4cfe136d318440e81bb39e
|
btc: 183ZdPA9c5XkGgacaN9q7aJY93asV2BnKt eth: 0x144c3b9d9c3c6e465d4cfe136d318440e81bb39e
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
November 13, 2017, 02:54:10 PM |
|
31-34mhs
Now I am mining XZC but difficulty raised a lot. Do you mind sharing your settings for 1080Ti in BTX mining? Do you expect card setting? +120 core and -502 mem. I search as well but feedback from fellow miners are always appreciated. Thanks. this speed is only achieved by SP miner . Yep I noticed. I get 24 Mhs with CCMiner 2.2.2. SPmod2 is provided in discord but I prefer using regular one due to security concerns. or you can pay SP for the miner and gain 50% more hashing power and forget your concerns Yeah and ROI in few years. are you mining with a calculator ....... even so , in order to make money you need to invest the miner cost .05 btc which is about $330, now tell me can you buy 50% of your rig for that money ? because that is what you will gain ! and for the same power consumption . i did save you a lot of money so buy me a beer btc 183ZdPA9c5XkGgacaN9q7aJY93asV2BnKt eth 0x144c3b9d9c3c6e465d4cfe136d318440e81bb39e The speed gain is not 50% it's 15% only makes sense if you have at least 50 GPUs, otherwise you're better off buying another GPU with those 0.05. And why would I pay for something that is leaked? Sorry to hear if you were stupid enough to give that chinese sleazebag your bitcoins.
|
|
|
|
pfft
|
|
November 13, 2017, 03:02:55 PM |
|
might be a driver issue - try DDU and reinstall fresh drivers through device manager - all Tis from the same maker? Yes same cards
|
|
|
|
Temporel
|
|
November 13, 2017, 03:08:22 PM |
|
card in the middle or pulling air from the back of another card probably. Put a floor/desk fan on all of them and watch the temp go down. Nothing wrong with 34c btw.
|
|
|
|
|