### A ChainWorks Industries (CWI) Project - CWIgm | Simple Powerful Stable

[mINGz]

### CWI-MINING - CWIGM

hi all ...

we have the latest CWIgm-0.9.7.1 release ready for the beta testers ...

we will be going through the previous posts one by one tonight - so if you are missed - please let me know via pm and ill send you the download link ...

we will also be posting the md5hash in the op shortly - so you can check the files against the hash ... they MUST match ... if the md5 hashes do NOT match - you have a binary that did NOT come from ChainWorks Industries - and we would advice you delete those binaries IMMEDIATELY and NOT run them ... for those that dont know how to check - please let us know via the thread - and we will put a small instruction list together for you ...

the link you will be receiving from now on is a shared folder in our MEGA account ... this will mean that if you keep the link - you have full access to the latest miner / files ... so please keep the link handy ... when we announce a new version here in the thread - just go to the link and the latest files should be there ... we may or may not keep ALL the files in the folder - but for the time being - all versions will be contained in this folder until a decision is made ... so once again - please keep this link handy - as it will save a HUGE amount of work on our part and make it MUCH simpler for you to access the latest revisions ...

for those that have been waiting for me to respond to your requests via pm - ill be going through the entire pm list tonight ... as stated earlier - we have been trying to organize a simpler method of getting the links to the beta testers - and we think this will do for the time being ... which is the reason i have not responded to your pm in the last 48hours ...

the version info is contained within the zip file - but basically this version is a small update to stabilize the miner further ...

changes made -

- port selection parameter introduced ( --lodiff ) ...
- display solved blocks on miner output ...
- ignore unsupported GPU devices on launch ...
- parameter to list supported GPU devices ( -n ) ...
- a few smaller code fixes ...

so if you have been suffering from the miner pushing you to the hidiff port - you can override this by using the --lodiff parameter ...

this package also contains the requested compute50 CWIgm binary - for those that have maxwell cards - such as the 750ti ... will be interesting to see how they still work - hash and stability wise ...


-------


as a side note - some of you have already noticed that we have successfully compiled the Denarius daemon in our pool server - tanx to the changes made by the dev of the coin carsen ...

subsequently the pool has been setup and is currently being tested with our internal miner - and as such is in 'alpha' designation ... will be put into beta mode in a few days ... the internal testing is so far so good ...

http://pool.chainworksindustries.com/dnr/ ...

mining here will help us iron out any issues - especially with the lodiff and hidiff ports ...

lodiff port - stratum+tcp://stratum.chainsworksindustries.com:2100/ ...
hidiff port - stratum+tcp://stratum.chainsworksindustries.com:6100/ ...

you will find that will all pools in CWI-Pool - the important info is found in the top right hand corner of the pool - where the pool selector is ...

from name of coin - to ticker symbol - to ports - and level of testing it has been designated ...

colours of the pools also designate level of testing - so its easy to identify which are full production pools and which are still in test mode ...

blue - alpha designation ...
cyan - beta designation ...
brown - production designation ...

miners - NEVER use hidiff port for smaller hashrates ... its designed for the high hashers and farms ... its starts at a diff of 2.5 which is quite high for small miners ...

our miner is being worked on for TRIBUS inclusion which will be present in CWIgm-0.9.9 ... current version CWIgm-0.9.7.1 only has SkunkHash ...

PLEASE NOTE - the CWI-Pool system pools are open to the public - so anyone can mine on them with your own miners ... you do not NEED to have our miner to mine on any of the pools within the CWI-Pool system - we just lock our CWIgm miner to the CWI-Pool so we can test them on a known and controlled environment ... so if you are happy with the pool you are currently mining on - or not - you can point your miners to the CWI-Pool of your choice without issue ... you only need a n account ...

tanx ...

#crysx

Is the beta test closed for new comer? I sent you my introduction and request to join the beta test yesterday

Thank you for your replying in advance

[Mapuo]

Thanks. Waiting PM.

[love4youro]

Hi,  interested to join this closed beta test, have few  1080ti and 1060s, waiting for your PM with the miner download link, thanks!

[hjrs]

18 Zotac mining cards ,,
Pm if you need help

i'm having a 117 MH/S with Sig-SPmod miner  per Rig ,

351 in total i can go higher but until i receive the new AC

[cpc]

Hi,

also interested in the beta

[droghtak]

i will test the 750ti and K2200 whenever I fix my rigs ... yesterday i had a little incident 


BTW. what is the hashrate achieved by your DNR miner?

[klambu]

Hi
I'm also interested to test the miner and direct a few 1060 and 1080 to your pool.
PM sent.

[zer0k]

### CWI-MINING - CWIGM

hi all ...

we have the latest CWIgm-0.9.7.1 release ready for the beta testers ...

<SNIP>

tanx ...

#crysx

Great work crysx!!

I'm looking forward to getting the PM and getting updated

[xarix]

Hello everyone.

This idea of yours is exactly what i was thinking of proposing to my very very good programming comrades,like it so much that im currently writing my first post here
Currently on tribus i'm getting 60-61mhs from Asus strix 1080@180W,47-48mhs@135-150W per 1070 Gigabyte extremes and Asus strixes.

Needless to say i'd gladly have your miner to play around with,afterall there is too much disparity between cc and sp-mods,gtx 1060 matches gtx 1070,1070 overruns 1080 by 10mhs,i think that's not fair at all .

Please pm me when you can,looking forward to this!

[N30Sniip3r]

How can i get to be part of this test?

[chrysophylax]

hi all ...

the attempt at automating the send out - has failed miserably ... hence the delay in sending the new links ...

i will personally have to go through every single pm / email and resend the 'welcome' message which has the new link to the updated files ... this of course was the original plan anyway - but an automated system would have made life a lot simpler ...

for those of you that have have already received messages ( if any ) via the automated system - please accept the manual one im about to send as a 'just in case' message ...

this will take some time - so patience will be appreciated ...

for those of you that are posting here to join in the Closed Beta - please pm me instead ...

it is imperative that you check the md5hash sums posted in the second post ... there seem to be a few 'other' miners being redistributed by malicious entities ... we supply these md5hashes so YOU as the miner KNOW that the files have come directly from ChainWorks Industries (CWI) and not from any other source ...

it is entirely up to you to check - and if there is ANY doubt as to the authenticity of the files - DELETE them - DO NOT use them - and contact us for the link to the OFFICIAL files ... even with these files - ALWAYS check the hash sums located here - https://bitcointalk.org/index.php?topic=2054431.msg20486566#msg20486566 ...

if you wish to join us on slack - please let us know ...

tanx ...

#crysx

[Mapuo]

Hi, any news for new version?

[Crypt0mat4]

Hello, I am having the following errors ad infinitum, with both of my cards, this is my bat:

cwigm_x64 -a skunk -u 1 -p 1 --cpu-priority=3 -i 20
pause

[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #0: Zotac GTX 1060 6GB, 15.21 MH/s                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: ASUS GTX 750 Ti, 24.06 GH/s                                                               
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function             
   
Any suggestions?

[zer0k]

Hello, I am having the following errors ad infinitum, with both of my cards, this is my bat:

cwigm_x64 -a skunk -u 1 -p 1 --cpu-priority=3 -i 20
pause

[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #0: Zotac GTX 1060 6GB, 15.21 MH/s                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:00] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: ASUS GTX 750 Ti, 24.06 GH/s                                                               
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function                                                                   
[2017-08-03 23:07:01] GPU #1: invalid device function             
   
Any suggestions?

-u 1 needs to be your username and workername on the pool

Try putting this in your batch file:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

:START
cwigm_x64 -a skunk -u POOLUSERNAME.WORKERNAME -p x --cpu-priority=3 -i 20
GOTO start

[zer0k]

Any news or updates for the people looking for the next beta version you've mentioned?
I'm guessing I'm last because my name starts with a "z"

[Mikanoshi]

SIGT pool link is incorrect. chainworksindustires
Still waiting for the beta miner)

[renozi]

Still waiting for PM from chrysophylax

[love4youro]

Still waiting for PM from chrysophylax

same here...

[chrysophylax]

SIGT pool link is incorrect. chainworksindustires
Still waiting for the beta miner)

tanx ...

fixed ...

im at the messages AGAIN today ... replies with new 'welcome' message soon ...

please keep this link we will be sending out as a permanent one ...

tanx ...

#crysx

[damniatx]

pm-ed,

waiting for the download link