AMD Releases Driver for DAG Issue !!!

[Kumic]

7x480 rig went from 186MHs to 203MHs.

Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.

Thanks.
I think that System restore point is also good if something goes wrong. So I will do that first.

[Hypernova]

Claymore just exits after "POOL/SOLO version" line, happens with 9.5 and 9.8. Any ideas?

[chronek]

Claymore just exits after "POOL/SOLO version" line, happens with 9.5 and 9.8. Any ideas?

I have Win7 and have the same issue with amd official drivers...

[Luisjc69]

7x480 rig went from 186MHs to 203MHs.

Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.

but the driver is not working with RX580 8gb, i make the same then you....and need 145W each card, before was 100W 

[Mattthev]

At least it works für mem settings and FAN. Everthing else done in bios.

https://anorak.tech/c/downloads

Yeah Anorak's... 

[hagbase]

At least it works für mem settings and FAN. Everthing else done in bios.

https://anorak.tech/c/downloads

Yeah Anorak's... 

Anything wrong with that?

[PcChip]

Amd forgot linux version  

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

[toptek]

I'm using it now , impressed ....

[Vann]

Amd forgot linux version  

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

I wouldn't hold my breath. Official AMD support for Linux has been slow to almost non-existant since they moved to the AMDGPU Pro drivers. The official AMDGPU Pro drivers have yet to support GCN 1 & 2 cards in Linux despite having done so in Windows for YEARS, so you can't mix GCN 1 & 2 cards with newer cards using the official drivers.

[dragonmike]

Anyone using RX 570's who can confirm Wattman works (including undervolting) with the new driver?

[glester]

Amd forgot linux version  

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

No news on Linux drivers yet?..

[ILLCOMM]

Wattman is not controlling voltages for me.

Per the screen shot I have GPU and memory voltages at 810mV. On old drivers (and using WattTool) I would see just under ~60w in SIV and roughly ~100w per card at the wall (after netting out the system draw). In this case I was pulling ~108w in SIV and ~150w from the wall for the card (after netting out the system draw). Dual mining adds about anther 20w in SIV (so, more at the wall).

Not good.

Windows 10
RX470

https://i.imgur.com/nwN1G08.png

(I can't figure out how to inline attach an image, sorry)

[Documan]

Does it work with R9 nano?

[fury420]

First rig I've attempted to update isn't working, Claymore crashes at

start building OpenCL program for GPU 0...

Seems to be a mix of the app force quitting, or the entire system crashing & rebooting.

Rig is running Win 7 with 4x 470 and 1x 380, with latest DDU used before driver install and pixel patcher + 6GPU mod used afterwards.
Same result using either ETH 9.8 (ETH-only mode) or ZEC 12.6

All cards are at default clocks, voltage, timings. Tried each card individually using -di flags, same result.

[blockbasher]

Gigabyte RX 580 gaming 8G Hynix.   Bios modded, now running 31.3Mh/s from 29.6Mh/s but having major issues controlling anything.   Trying to adjust clocks or voltage with Claymore seems to make everything go to hell and afterburner 4.4 beta, only the fan control works.  

[longjohnsilva]

~2mh more per Card. RX480

But no control of GPU / RAM Clock or Volt. 
I use WattTool

[joaocha]

http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar

[ltcsprite]

Got an extra 0.5 MH/s per card ,very disappointing, hash rates allover the place very unstable... bleh

rx 480s

[IojkinKot]

Power consumption is too high on those drivers. Wait for fixed version

[ltcsprite]

AMD sucks balls.