Baikal Giant X10

[Gongolo]

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

My current last day stats @suprnova:  220 XVG.

[Marvell2]

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

[xaco147]

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

My current last day stats @suprnova:  220 XVG.

Ok, thank you

[elmond]

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

just cut the wire and coonect

[Marvell2]

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

just cut the wire and coonect

cant belive i did not think of this , just did that now

the fan from the D3 seems to work fine , now it seems there is is an issue with both my x10s tho they both say miner down i hope its the pool

on starpool with both

[henrylitee]

hi,?

im minning with baikal x10 in nicehash  but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

[Gongolo]

hi,?

im minning with baikal x10 in nicehash  but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

Add "enable-nicehashsma" miner option and set it to "true".

[henrylitee]

hi,?

im minning with baikal x10 in nicehash  but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

Add "enable-nicehashsma" miner option and set it to "true".

thanks is workinggggg

[yrk1957]

Any tricks to get this to work with nicehash?

When I add nicehash pools, after deleting everything else, and save, the mining process stops and never restarts.

After this the mining process does not start even if I change pools to zpool (which works). I have to un-plug and re-start it to get zpool working.

[Overlast]

Guys,
Overnight the blue leds started blinking.  Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone,  any suggestions what to do?
Could the sd card all of a sudden be corrupted?

[cryptonitro]

Guys,
Overnight the blue leds started blinking.  Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone,  any suggestions what to do?
Could the sd card all of a sudden be corrupted?

Hi Overlast , SD is the original one ? when you shut it off wait at list 1 minute to test.

Do you have an other x10 ? if yes

• try to invert the orange pi , let sd cards in place dont invert it.
• see if the problem is now on the other miner
• then just invert the SD card and check

If you have only one x10 , i suggest to rewrite the software on sd card.
check instruction here

if problem persist contact Baikal , you ll have probably orange pi in trouble

[Overlast]

Guys,
Overnight the blue leds started blinking.  Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone,  any suggestions what to do?
Could the sd card all of a sudden be corrupted?

Hi Overlast , SD is the original one ? when you shut it off wait at list 1 minute to test.

Do you have an other x10 ? if yes

• try to invert the orange pi , let sd cards in place dont invert it.
• see if the problem is now on the other miner
• then just invert the SD card and check

If you have only one x10 , i suggest to rewrite the software on sd card.
check instruction here

if problem persist contact Baikal , you ll have probably orange pi in trouble

I have only one and already tried re writing on different sd cards. No luck. Yellow and blue leds keep flashing simultaneously and red led burning steady.
Checked network and cables; all ok.
Both leds on PI Zero (next to ethernet cable) both on.

I just contacted Baikal. Hopefully they can help.

[cryptonitro]

I have only one and already tried re writing on different sd cards. No luck. Yellow and blue leds keep flashing simultaneously and red led burning steady.
Checked network and cables; all ok.
Both leds on PI Zero (next to ethernet cable) both on.

I just contacted Baikal. Hopefully they can help.

Damm sorry to hear that, i can imagine the frustration you can have.

One of mine start to get crazy , high hashrate (like 100Ghs) but unfortunatly shares rejected and unreliable some minutes after restart.

did you update the last software with nist5 / x11gost ?

[Overlast]

Yeah. I did update a while ago and it was working just fine.
Untill yesterday. Unfortunately things do break...
Maybe i best start looking for a Pi Zero.
Hope you can solve your problem.

[cryptonitro]

Yeah. I did update a while ago and it was working just fine.
Untill yesterday. Unfortunately things do break...
Maybe i best start looking for a Pi Zero.
Hope you can solve your problem.

may be not big chance with that but do you have a fix IP for this miner (in  DHCP?)  try also to shut off your router or box. but yes is probably orange pi trouble

[henrylitee]

which is the maxium Celsius temperature (°C) that bailkal con  works?

[aerodynomic]

which is the maxium Celsius temperature (°C) that bailkal con  works?

40C is what the site says but mines been running about 45C with 30% fan for pretty much its entire life and its been fine. The cooler the better though, sometimes the hashrate is affected for certain algos if the temp is too high. Ive mostly been on Nist5 which is lower power = lower temps.

[Shorty2520]

Anyone know something about the CE-Certificate debate?

It was on here some time ago and normally you cannot import things into EU without CE markings.

Will the next baikal products have it? As i read it’s a risk, if customs check it they don’t let it go through.


If there will be one day a new product and the MOQ is high (example 6) then probably customs will have a look and this maybe result in loosing a ton of money.




What do you think about that? Or anybody knows sth?

I think about buying a larger amount if there come new ones one day.

Thx (i‘m active in this thread nearly till start)

[MiCoSa]

Anyone know something about the CE-Certificate debate?

It was on here some time ago and normally you cannot import things into EU without CE markings.

Will the next baikal products have it? As i read it’s a risk, if customs check it they don’t let it go through.


If there will be one day a new product and the MOQ is high (example 6) then probably customs will have a look and this maybe result in loosing a ton of money.




What do you think about that? Or anybody knows sth?

I think about buying a larger amount if there come new ones one day.

Thx (i‘m active in this thread nearly till start)

They dont have a CE-Certificate and i am quite sure they wont have any in future. The chinese manufacturers of miners dont give a shit about there customers. They will promise you everything to make you buying. But if customs check the delivery and they wont let it through, you dont need to wait for any help from the manufacturers. From the time they have your money, it is completely your risk. Do not expect, they will refund only one dollar. This is a common problem from chinese suppliers, doesnt matter what they are selling. They know, you cant do anything to them. try to send a letter from an attorney or something like that to them. The only thing they will do about that is a big laugh.

[NoFR8]

Hi,

Yesterday, on my X10, one of the blue LEDs went out, but the miner still hashes at the correct speed. I restarted, reset the pi and controller, and tried different SD card with no effect. Today, I spent a few hours online, looking for a reason/solution, but couldn't find any. When I went back to the miner, I found another blue LED has gone out (still hashing correctly). What could be causing this?