Antminer D3 Blissz firmware (10/12 v1.12 update)

[Ivro01]

Cool looks nice.
I have sometimes my third hashing board which diseapear from my active list... In this case my (RT)Hrate stay the same or decrease like if the board disapear really, that's very strange, Fuck bitmain !!  I can try to change setting only on this fucking board only with your firmware.
My only problem is with your fee... D3 and Dash are not very profitable anymore and with your fee in addition defenitly no......
Is there a way to deals with you and pay for you're firmware and future update without your forever fee...?

[kristikun]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

[br1mcoin]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

yeah, that is a good info to know.
Perhaps to gain better profitability, you can tweak to 21Gh/s, for those who have free or low electricity tariff.

[blissz]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

The PSU is rated for 1600 watts so just give it a try as long as you can keep it cool. Share your results, I am curious how far it clocks actually.

[meccaflare0]

I'm going to go to a mining farm and mod a few to test. If this make the miner run profitably that would be amazing. Bitmain's D3 has a lot of people depressed

[blastar]

last teaser before releasing it in a few hours

That looks awesome! Can't wait for the release to test it! You're the man Blissz!

[Ivro01]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

example, frequence set to 600 during 24h, temp intake between 10 to 16°C. No overtemp or other problem....

http://imageshack.com/a/img923/9172/lxiFI3.jpg

[caliel]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

example, frequence set to 600 during 24h, temp intake between 10 to 16°C. No overtemp or other problem....

http://imageshack.com/a/img923/9172/lxiFI3.jpg

How much power are you pulling to reach that hash rate?

[Ivro01]

On the wall if my wattmetre tell true an average arround 1000w (on 230V french electrical network at 50hz)

[digital$]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

example, frequence set to 600 during 24h, temp intake between 10 to 16°C. No overtemp or other problem....

way.way to many HW errors for a 47min burn time...even with colder temps you'll see HW errors running that freq

[blastar]

Thanks for your work blissz on D3 firmware im not currently using it becouse i dont have to pay electricity  but i might be interested in OC it ,  can i get those 21 gh stable OC running 24/7 ? mine D3 is in cold ventilated space

I Hope we get to use D3 on single algos from x11 in your future Firmwares !!

example, frequence set to 600 during 24h, temp intake between 10 to 16°C. No overtemp or other problem....

http://imageshack.com/a/img923/9172/lxiFI3.jpg

Too many HW errors and too high temperatures a for a 24/7 use! I think 600 is too high for the intake temperatures (10°C.-16°C), and it might damage the miner sooner or later. Better lower it to keep the temperatures lower, max temperatures should be something between 70°C-73°C!

[Ivro01]

It was a test during 24h to check the possibility, I switch back on auto since.
one guys ask, I just showed and he made is own conclusion try or not...

[dod777]

example, frequence set to 600 during 24h, temp intake between 10 to 16°C. No overtemp or other problem....

http://imageshack.com/a/img923/9172/lxiFI3.jpg
[/quote]

a lot of HW you have with this frequence 

[meccaflare0]

Is it confirmed that the D3 can do other Algos? If so are the speed known?

[cryptonitro]

Is it confirmed that the D3 can do other Algos? If so are the speed known?

nop

[meccaflare0]

Is it confirmed that the D3 can do other Algos? If so are the speed known?

nop

But theoretically it can though right? X11 is a combination of 11 algos chained together so it sees plausible. Other X11 Asics also do the algos contained in X11

[dndssc]

Is it confirmed that the D3 can do other Algos? If so are the speed known?

nop

But theoretically it can though right? X11 is a combination of 11 algos chained together so it sees plausible. Other X11 Asics also do the algos contained in X11

we hope, it's the only way for make d3 profitable again, for now blissz did not talk about this opportunity

[taserz]

Look if Baikal can do it I'm pretty sure the D3's can do it.... Watching this thread very closely.

Your an idiot. Baikal sells a Field Programmable Gate Array. Spartan FPGA or anything like that. You are an idiot. Just because one company can do it doesn't mean another could. That is like say you can drive a 18 wheeler like you can drive a boat. They both move you but one doesn't work in the other since it is not designed to do so.

I have got a new non standard answer from Bitmain.

The Antminer D3 has been designed and tested to mine DASH only. It can be used to mine other X11 coins as well but we cannot guarantee the performance or efficiency of the D3 miner when used to mine other X11 coins than DASH.

Best regards,
Joy
Bitmain
Always order products directly from our website: www.bitmain.com
"Solved" means we replied - we still work on your issue until it is resolved.

They just not garantee the performace, so they work on it.

Other x11 coins X11  aka

Dash (Darkcoin)

StartCoin

CannabisCoin

SmartCoin

ConspiracyCoin

Europecoin

GiveCoin

HashCoin

LimeXcoin

Logicoin

Muniti

Nyancoin

Quebecoin

XCurrency



The only benefit from this firmware is for the thread creator taking a fee. It does nothing you can't do already.

[cryptonitro]

Look if Baikal can do it I'm pretty sure the D3's can do it.... Watching this thread very closely.

Your an idiot. Baikal sells a Field Programmable Gate Array. Spartan FPGA or anything like that. You are an idiot. Just because one company can do it doesn't mean another could. That is like say you can drive a 18 wheeler like you can drive a boat. They both move you but one doesn't work in the other since it is not designed to do so.

I have got a new non standard answer from Bitmain.

The Antminer D3 has been designed and tested to mine DASH only. It can be used to mine other X11 coins as well but we cannot guarantee the performance or efficiency of the D3 miner when used to mine other X11 coins than DASH.

Best regards,
Joy
Bitmain
Always order products directly from our website: www.bitmain.com
"Solved" means we replied - we still work on your issue until it is resolved.

They just not garantee the performace, so they work on it.

Other x11 coins X11  aka

Dash (Darkcoin)

StartCoin

CannabisCoin

SmartCoin

ConspiracyCoin

Europecoin

GiveCoin

HashCoin

LimeXcoin

Logicoin

Muniti

Nyancoin

Quebecoin

XCurrency



The only benefit from this firmware is for the thread creator taking a fee. It does nothing you can't do already.

cant do ? so people are dumb , cause they dont share knowlege , cause it s impossible to find a tutorial -> how to set the fan down at : startup, switch pool , change setting in miner , etc ... and that the basic

we need that for other antminer , l3+, s9 etc.... i know a bit linux and i try to send cat in ssh with putty but this not result with usually cat editor , you just can see the text file
anyway blissz deserve fee for work and time, everyone are free dont agree and not using it.

[taserz]

Look if Baikal can do it I'm pretty sure the D3's can do it.... Watching this thread very closely.

Your an idiot. Baikal sells a Field Programmable Gate Array. Spartan FPGA or anything like that. You are an idiot. Just because one company can do it doesn't mean another could. That is like say you can drive a 18 wheeler like you can drive a boat. They both move you but one doesn't work in the other since it is not designed to do so.

I have got a new non standard answer from Bitmain.

The Antminer D3 has been designed and tested to mine DASH only. It can be used to mine other X11 coins as well but we cannot guarantee the performance or efficiency of the D3 miner when used to mine other X11 coins than DASH.

Best regards,
Joy
Bitmain
Always order products directly from our website: www.bitmain.com
"Solved" means we replied - we still work on your issue until it is resolved.

They just not garantee the performace, so they work on it.

Other x11 coins X11  aka

Dash (Darkcoin)

StartCoin

CannabisCoin

SmartCoin

ConspiracyCoin

Europecoin

GiveCoin

HashCoin

LimeXcoin

Logicoin

Muniti

Nyancoin

Quebecoin

XCurrency



The only benefit from this firmware is for the thread creator taking a fee. It does nothing you can't do already.

cant do ? so people are dumb , cause they dont share knowlege , cause it s impossible to find a tutorial -> how to set the fan down at : startup, switch pool , change setting in miner , etc ... and that the basic

we need that for other antminer , l3+, s9 etc.... i know a bit linux and i try to send cat in ssh with putty but this not result with usually cat editor , you just can see the text file
anyway blissz deserve fee for work and time, everyone are free dont agree and not using it.

It switches pools by default... Put in a few pools. When it loses it's connection to the pool it goes to the next. Or just use the built in api and you can have it switch to the most profitable coin.. Which guess what.... They only give you SSH access to the miners for a reason...

Dude just modify the miner settings lmao.