Isokivi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:31:54 PM |
|
The file we want is /run/smh/.stat.log This is what they look like: http://pastebin.com/xN7t9WaHPlease note that: pastebin screws up the line lenght, all the info regarding a single chip is actually on one line. And secondly, this is a sample of that has two h-boards, the maximum is sixteen. Let me know if theres something else I can help with. [edit] btw since theres propably no nice way to time the data collection exactly when the new logs are generated (or perhaps there is, Im out of familiar waters here) I would suggest that you have the script pick up data every 330 seconds (5min 30 sec). OK, looks good. When copied over to one of my linux boxes it looks like this ( http://s15.postimg.org/z1kuze2l7/bfminer_log.jpg). I presume that there are no lines of whitespace at the beginning or end of the file. Does that look right? I was thinking that it might be better to have the script running as a cron job rather than building in a certain waiting period before sampling into the script itself, but we can do it the other way if you like. I can get the script to check the timestamp of the log file and sleep for 30 secs or so if it's the same as the previous data point in any case, so that data isn't double counted. Any preference on file format (was thinking comma separated text for easy input into excel - xml should be possible, but might take longer to get working)? Do you have any particular data headings in mind for the consolidated output? Personally I would just like larger samples of data to chew on, so hardly any preference here ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
darkfriend77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:32:39 PM |
|
FILE* fp_json=fopen("stat.json","w"); fprintf(fp_json,"{ \"stats\": \n {"); fprintf(fp_json,"\"speed\": %d, \"noncerate\": %.3f, \"noncerateperchip\":%.3f, \"hashrate\":%.3f, \"good\":%d, \"errors\":%d, \"spi-errors\":%d, \"miso-errors\":%d, \"jobs\":%d, \"record\":%.3f\n", speed,nr,(nr/chips),hr,nrate,error,espi,miso,job-last,record); fprintf(fp_json,",\"boards\": ["); int firstboard = 0; for(b=0;b<MAXBOARDS;b++){ if(b_speed[b]){ if (firstboard > 0) fprintf(fp_json,","); fprintf(fp_json,"\n{ "); fprintf(fp_json,"\"slot\": \"%c\", \"speed\": %d, \"noncerate\":%.3f, \"hashrate\": %.3f, \"good\": %d, \"errors\": %d, \"spi-errors\": %d, \"miso-errors\":%d",board[b],b_speed[b], (double)0xFFFFFFFF/1000000000.0*(double)b_nrate[b]/(double)wait, (double)0xFFFFFFFF/1000000000.0*(double)b_hrate[b]/(double)wait*(double)756/(double)1024, b_nrate[b],b_error[b],b_espi[b],b_miso[b]); fprintf(fp_json," }\n"); firstboard = 1; } } fprintf(fp_json,"\n ]"); fprintf(fp_json,"\n } }"); fclose(fp_json); we just put out .... some more data in the stat.json which we then ... use for the web gui ... and done ... ... no magic ... stick needed here ... ... we need to decide what ... data we want to be displayed ... what do we need ...
|
|
|
|
jlsminingcorp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:40:53 PM |
|
we just put out .... some more data in the stat.json which we then ... use for the web gui ... and done ...
... no magic ... stick needed here ...
... we need to decide what ... data we want to be displayed ... what do we need ...
Great stuff darkfriend77, sounds like you may have just volunteered ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) !
|
|
|
|
punin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:44:46 PM |
|
punin
When an order is placed and paid via bitpay does it go to processing automatically after so many confirmations?
Only asking as it took a few hours for the first confirmation (usually only takes 10 or so mins) and the order is still on hold.
Yes it should go automatically into processing when payment has been made.
|
|
|
|
punin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:50:25 PM |
|
Hi, Niko I've send you a few Emails asking about bulk chip order prices. Is there any problem ?
Sorry Marto, I'm drowning in emails, just had someone take over the communication for me. We will introduce new chip pricing on the site this weekend.
|
|
|
|
pbigmoon
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:58:55 PM |
|
punin
When an order is placed and paid via bitpay does it go to processing automatically after so many confirmations?
Only asking as it took a few hours for the first confirmation (usually only takes 10 or so mins) and the order is still on hold.
Yes it should go automatically into processing when payment has been made. Sent you a pm i know your really busy but hopefully you get a min to look at it.
|
|
|
|
erem
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 01:59:24 PM |
|
punin,
I'am a bit confused. The Starter Kit board have 16 chips? and Full kit 16x16 = 256 chips? Are they those chips you sell for 80 euro, or there is something different?
|
|
|
|
Dexter770221
Legendary
Offline
Activity: 1029
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 02:53:03 PM |
|
punin,
I'am a bit confused. The Starter Kit board have 16 chips? and Full kit 16x16 = 256 chips? Are they those chips you sell for 80 euro, or there is something different?
Those are the same chips. But avaible immedietly as a test chips, that's why price is so HIGH.
|
Under development Modular UPGRADEABLE Miner (MUM). Looking for investors. Changing one PCB with screwdriver and you have brand new miner in hand... Plug&Play, scalable from one module to thousands.
|
|
|
dani
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:28:50 PM |
|
I set difficulty to 128 now. It fell to 53gh for 10-20 minutes, I can't see why this keeps happening. Now I'll try autotune off with good settings I once had, see how this works out.
I tried to change one hboard without touch the others, but it seems that chips with high error rate on another hboard start performing good without any errors. Anyone found a pattern? Like if I change chip 4 it will influence every 4th or 8th chip? or every chip on the same spot, but on different boards?
|
Hai
|
|
|
nOObStyleX
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:40:30 PM |
|
I have got my two starter kits but they dont work. I used guide and in bitfury admin noncerate 0. In ssh i see detected 16 chips after while is denied read log. Both h boards are very hot, cant put hand on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) i have fear they burn.
|
|
|
|
dani
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:51:25 PM |
|
I have got my two starter kits but they dont work. I used guide and in bitfury admin noncerate 0. In ssh i see detected 16 chips after while is denied read log. Both h boards are very hot, cant put hand on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) i have fear they burn. ssh into your machine, type and post results
|
Hai
|
|
|
nOObStyleX
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:55:50 PM |
|
I have got my two starter kits but they dont work. I used guide and in bitfury admin noncerate 0. In ssh i see detected 16 chips after while is denied read log. Both h boards are very hot, cant put hand on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) i have fear they burn. ssh into your machine, type and post results speed:864 noncerate[GH/s]:0.000 (0.000/chip) hashrate[GH/s]:0.000 good:0 errors$ 0: 864 0.000 0.000 0 0 0 0 1 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:0] 756 0 0 0$ 2 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:1] 756 0 0 0$ 3 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:2] 756 0 0 0$ 4 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:3] 756 0 0 0$ 5 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:4] 756 0 0 0$ 6 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:5] 756 0 0 0$ 7 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:6] 756 0 0 0$ 8 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:7] 756 0 0 0$ 9 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:8] 756 0 0 0$ 10 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:9] 756 0 0 0$ 11 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:A] 756 0 0 0$ 12 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:B] 756 0 0 0$ 13 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:C] 756 0 0 0$ 14 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:D] 756 0 0 0$ 15 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:E] 756 0 0 0$ 16 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:F] 756 0 0 0$ speed:864 noncerate[GH/s]:0.000 (0.000/chip) hashrate[GH/s]:0.000 good:0 errors:0 spi-errors:0 miso-e$ 0: 864 0.000 0.000 0 0 0 0
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:57:22 PM |
|
Check your pool settings.
|
|
|
|
nOObStyleX
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:03:50 PM |
|
Yes, I do but do not see nothing wrong.
|
|
|
|
Isokivi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:04:59 PM |
|
Yes, I do but do not see nothing wrong.
You have it pointing at a stratum capable pool and at a stratum port ?
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
rammy2k2
Legendary
Offline
Activity: 1974
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:05:57 PM |
|
whats the IRC channel for bitfury ?
|
|
|
|
Isokivi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:06:55 PM Last edit: September 06, 2013, 04:20:47 PM by Isokivi |
|
whats the IRC channel for bitfury ?
#bfsbsupport on Freenode seems like the english one.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
rammy2k2
Legendary
Offline
Activity: 1974
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:14:54 PM |
|
whats the IRC channel for bitfury ?
#bsfbsupport on Freenode seems like the english one. there is no one on freenode @ #bsfbsupport
|
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:20:36 PM |
|
Yes, I do but do not see nothing wrong.
You could try to use the ip-address of the pool. And let it run a while, these pals need some time to wake up and realize whats happening.
|
|
|
|
Isokivi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:21:06 PM |
|
#bfsbsupport , sorry typo.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
|