[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[freedom777]

same problem ({"code":-32501,"message":"Share rejected due to low difficulty"}) for me too.

bminer 12.1.0 at grin-pool.org worked perfectly since 2-3 days.
is this low diff problem not also a huge think at grinmint.com pool since yesterday?

yes!

Working on it.. the problem is that I always have problems to connect to grinmint / grin-pool, which makes it hard for me to validate.

Will be fixed soon.

Win 10 works stable and good, but win 7 not! Win 7,  Rig with  6 1080ti  -  1.95 G/s per GPU , gminer  only 0.9 G/s per card.    Rig with  5 1080ti  -  ~  2.6G/s per card. Driver 417.35(was try 411 also). loading of GPU very unstable for Windows 7,  its about 40-50% out of 100%.
Can you fix it for win 7?

windows 7 here too...1080ti's behave like 1070s.........the number of cards trigger this issue

Yes. Exactly.

[hanih]

does bminer support 2080ti cards?cannot get it to mine  GRIN??

[Bucheran]

When add RTX support?

[Overmaster_007]

Bminer 12.1.0
Have problem on two rigs. One with all 1080 ti, two with 1080 ti
 and 1080

[INFO] [2019-01-19T00:17:23+02:00] Connected to grin29.f2pool.com:13654
[INFO] [2019-01-19T00:17:23+02:00] Starting miner on device 1...
[INFO] [2019-01-19T00:17:23+02:00] Authorized with the server
[INFO] [2019-01-19T00:17:23+02:00] Started miner on device 1
[INFO] [2019-01-19T00:17:23+02:00] Starting miner on device 2...
[INFO] [2019-01-19T00:17:23+02:00] Received new job 110592112
[INFO] [2019-01-19T00:17:24+02:00] Started miner on device 2
[INFO] [2019-01-19T00:17:24+02:00] Starting miner on device 3...
[INFO] [2019-01-19T00:17:24+02:00] Started miner on device 3
[INFO] [2019-01-19T00:17:24+02:00] Starting miner on device 4...
[INFO] [2019-01-19T00:17:25+02:00] Received new job 116637808
[INFO] [2019-01-19T00:17:25+02:00] CUDA error DRIVER: '2' in func 'bminer::cuckoo::CuckarooSolverCuda::Initialize' line 116
[FATA] [2019-01-19T00:17:25+02:00] Fatal cuda error in GPU 4. Terminate soon...

[WARN] [2019-01-19T00:17:25+02:00] Miner died! It will be restarted soon...

[julian071]

Aslo waiting for a way to specify the worker name to grin-mint....

[Atomicc]

Starting miner on 1 devices
[INFO] [2019-01-18T12:01:38+05:00] Starting the management API at 127.0.0.1:1880
[FATA] [2019-01-18T12:01:38+05:00] Insufficient memory 5029 MB available on device (#0). Unable to run the solver
[WARN] [2019-01-18T12:01:38+05:00] Miner died! It will be restarted soon...


Is there a solution to this problem?
GTX1060 6gb

Is it any solution for this problem. It is not an issue with virtual memory.

[Zzo]

hi, I am getting the below errors. Anyone know why?
Thanks,

[INFO] [2019-01-18T22:53:02-05:00] Bminer: When Crypto-mining Made Fast (v12.1.0-5083c32)
[INFO] [2019-01-18T22:53:02-05:00] Watchdog has started.
[INFO] [2019-01-18T22:53:02-05:00] Starting miner on 3 devices
[INFO] [2019-01-18T22:53:02-05:00] Starting miner on device 0...
[INFO] [2019-01-18T22:53:02-05:00] Starting the management API at 127.0.0.1:1880
[INFO] [2019-01-18T22:53:02-05:00] Connected to eth-us-west1.nanopool.org:9999
[INFO] [2019-01-18T22:53:02-05:00] CUDA error DRIVER: '209' in func 'Initialize' line 41
[FATA] [2019-01-18T22:53:02-05:00] Fatal cuda error in GPU 0. Terminate soon...

[WARN] [2019-01-18T22:53:03-05:00] Miner died! It will be restarted soon...



Lubuntu 16.04 / Nvidia driver 410.93 / Cuda 10

[heavyarms1912]

hi, I am getting the below errors. Anyone know why?
Thanks,

[INFO] [2019-01-18T22:53:02-05:00] Bminer: When Crypto-mining Made Fast (v12.1.0-5083c32)
[INFO] [2019-01-18T22:53:02-05:00] Watchdog has started.
[INFO] [2019-01-18T22:53:02-05:00] Starting miner on 3 devices
[INFO] [2019-01-18T22:53:02-05:00] Starting miner on device 0...
[INFO] [2019-01-18T22:53:02-05:00] Starting the management API at 127.0.0.1:1880
[INFO] [2019-01-18T22:53:02-05:00] Connected to eth-us-west1.nanopool.org:9999
[INFO] [2019-01-18T22:53:02-05:00] CUDA error DRIVER: '209' in func 'Initialize' line 41
[FATA] [2019-01-18T22:53:02-05:00] Fatal cuda error in GPU 0. Terminate soon...

[WARN] [2019-01-18T22:53:03-05:00] Miner died! It will be restarted soon...



Lubuntu 16.04 / Nvidia driver 410.93 / Cuda 10

Miner doesn't support RTX cards if that's what one of your cards are.

[freely]

Hi, On lates version with 6x1070ti on grin getting a lot of rejected shares on f2pool

[coinut]

lots of "share rejected due to low difficulty"

11 accepted 24 rejected

testing grin on win7 12.1.0

[shandule]

Is there a way to setup Bminer with Sparkpool on Grin.
Miner is runing and shares are accepted but there is no worker on the pool.
I think it is because of the mail address, it is messing with syntax of miner.
I have tried to escape it like in the manual but worker still not showing up at the pool.
Any suggestion?

[Mare76]

Is there a way to setup Bminer with Sparkpool on Grin.
Miner is runing and shares are accepted but there is no worker on the pool.
I think it is because of the mail address, it is messing with syntax of miner.
I have tried to escape it like in the manual but worker still not showing up at the pool.
Any suggestion?

I noticed that if you connect the miner to the Sparkpool using youremail@mail.com.rigname then you need to input youremail@mail.com.rigname in the worker field to see the stats, not sure if that is the right way doh

EDIT: I checked the guide on Sparkpool and they changed the form of bminer setup  https://support.sparkpool.com/hc/en-us/articles/360015730673-Configuration-for-Bminer

EDIT2: Don't know why they put %% between username (email) and worker name ?! Bminer just stops working like that

[shandule]

Is there a way to setup Bminer with Sparkpool on Grin.
Miner is runing and shares are accepted but there is no worker on the pool.
I think it is because of the mail address, it is messing with syntax of miner.
I have tried to escape it like in the manual but worker still not showing up at the pool.
Any suggestion?

I noticed that if you connect the miner to the Sparkpool using youremail@mail.com.rigname then you need to input youremail@mail.com.rigname in the worker field to see the stats, not sure if that is the right way doh

EDIT: I checked the guide on Sparkpool and they changed the form of bminer setup  https://support.sparkpool.com/hc/en-us/articles/360015730673-Configuration-for-Bminer

EDIT2: Don't know why they put %% between username (email) and worker name ?! Bminer just stops working like that

https://i.imgur.com/25iL2Jh.jpg

First of all thank you.
You are missing something, you need to put %%2F not just %%

[Mare76]

@shandule
yeap, my bad...thanks

[yuzuak]

update:
low hashrate. 18 gps- 3 gps see pool

abc@gmail.com%%2Frig1  
running sparkpool

[chuckn3v3rsold]

Can't mine with bminer I always get this message:

CUDA error DRIVER: '2' in func 'bminer::cuckoo::CuckarooSolverCuda::Initialize' line 116
[FATA] [2019-01-19T14:42:52+01:00] Fatal cuda error in GPU 11. Terminate soon...

W10, nv 416.34, 12x1070 Ti

edit:
ok, it seems I had too little (80gb) virtual mem. with 85 works fine.

[alko67bi]

How I can use bminer on mwgrinpool.com?

[gloomik]

Cant mine on sparkpool.com with new bminer 12.2.0:

Invalid share: share context is invalid

Fix it please

[grendel25]

I tried on leafpool. Login to pool successful, but then messages like
[ERRO] [2019-01-08T20:36:13+01:00] Failed to parse the response: %!s(*stratum.RawIncomingMessage=0xc042152dd0), error: json: cannot unmarshal number -22 into Go struct field .code of type uint
[ERRO] [2019-01-08T20:36:16+01:00] Failed to parse the response: %!s(*stratum.RawIncomingMessage=0xc0421767d0), error: json: cannot unmarshal number -22 into Go struct field .code of type uint
[ERRO] [2019-01-08T20:36:16+01:00] Failed to parse the response: %!s(*stratum.RawIncomingMessage=0xc042152e80), error: json: cannot unmarshal number -22 into Go struct field .code of type uint

cannot unmarshal number -22 into Go struct field .code of type uint

forever

I tried it with just worker and and with worker name and email while replacing @ and / with corresponding special characters in URI format

Hi evlo, sorry that Bminer didn't support leaf pool at this moment.
Bminer supports Sparkpool and beepool already, please use other pools instead first.

when support for Leaf?

[realbminer]

We’re pleased to release Bminer 12.2.0.

The release provides:

Optimize CPU usage.
Fix compatibility issues with grin-pool.org and grinmint.com.
Experimental support for Turing GPUs.
Allow bminer to run with older NVIDIA drivers.

Please see https://www.bminer.me for more details.

Happy mining!