[ANN] profit switching auto-exchanging pool - www.middlecoin.com

[punkrock]

Sure, I can push it to 850 but I want to work on my machine smooth and that's not possible when setting the intensity to 20.

This is another advatange of he CGWatcher program, one of the options is automatic intensity setting, as I'm currently typing this it's at 15 and perfectly useable, as soon as I leave the computer alone for 5 minutes it reverts back to 19 and 880KH, when I want to use the pc again it drops to 15

Yes, I know about this feature but as I am working on my machine 16-18 hours a day, -I 17 works fine for me and when I go to sleep, I set it manually to 20.

[1713987671]

1713987671

[1713987671]

1713987671

[1713987671]

1713987671

[jam3zs]

Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.

Yea you right, I was happy too soon, the crappy card still shows two threads.

Oh I see so I still need to run two instances of cgminer but the -d just tells each instance which cards it is controlling.

I can still see this being a pain in the arse with bamt though. I might install some other linux distro and get a separate monitor program.

 

[Gamer67]

Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.

Yea you right, I was happy too soon, the crappy card still shows two threads.

Oh I see so I still need to run two instances of cgminer but the -d just tells each instance which cards it is controlling.

I can still see this being a pain in the arse with bamt though. I might install some other linux distro and get a separate monitor program.

 

-d tells it which card to use. --remove-disabled removes the disabled card from the cgminer display otherwise you will have a card showing 0.000 Mhz and it hinders the performance of the card that is running.


*edited for correct meaning of -d

[jam3zs]

Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.

Yea you right, I was happy too soon, the crappy card still shows two threads.

Oh I see so I still need to run two instances of cgminer but the -d just tells each instance which cards it is controlling.

I can still see this being a pain in the arse with bamt though. I might install some other linux distro and get a separate monitor program.

 

-d tells it which card to disable. --remove-disabled removes the disabled card from the cgminer display otherwise you will have a card showing 0.000 Mhz and it hinders the performance of the card that is running.

ooooh right! thanks!

[okimzti]

Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.

Yea you right, I was happy too soon, the crappy card still shows two threads.

Oh I see so I still need to run two instances of cgminer but the -d just tells each instance which cards it is controlling.

I can still see this being a pain in the arse with bamt though. I might install some other linux distro and get a separate monitor program.

 

-d tells it which card to disable. --remove-disabled removes the disabled card from the cgminer display otherwise you will have a card showing 0.000 Mhz and it hinders the performance of the card that is running.

according to https://bitcointalk.org/index.php?topic=28402.0, the -d tells it which device to use...

--device|-d <arg>   Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all

Can you please stop spreading misinformation =] kthx

[Gamer67]

Just use -d option like:

cgminer blah blah -d 0 -g 2 -d 1 -g 1 ....

Card 0 will have 2 thread and card 1 will have 1 thread.

Thanks a lot man!!
Finally my multicard rig can work with one instance!

I am fairly certain that you cannot do it this way. You need to run another instance of cgminer to run different thread settings.

Yea you right, I was happy too soon, the crappy card still shows two threads.

Oh I see so I still need to run two instances of cgminer but the -d just tells each instance which cards it is controlling.

I can still see this being a pain in the arse with bamt though. I might install some other linux distro and get a separate monitor program.

 

-d tells it which card to disable. --remove-disabled removes the disabled card from the cgminer display otherwise you will have a card showing 0.000 Mhz and it hinders the performance of the card that is running.

according to https://bitcointalk.org/index.php?topic=28402.0, the -d tells it which device to use...

--device|-d <arg>   Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all

Can you please stop spreading misinformation =] kthx

My bad, sorry. The method is still sound even though I confused the -d flag meaning.

So an example bat file would look like so:

Card one that only likes G 1:

cgminer.exe --scrypt -o stratum+tcp://eu.middlecoin.com:3333 -u 14e7qwzHbdLMdGJz7XcAG6oTMNtqTpn3Yv -p x -d 0 -I 13 -g 1 --gpu-engine 1050 --gpu-memclock 1500 --gpu-fan 100 --thread-concurrency 8192  -w 256 --gpu-powertune 20 --no-submit-stale --remove-disabled

Card two that likes G 2:

cgminer.exe --scrypt -o stratum+tcp://eu.middlecoin.com:3333 -u 14e7qwzHbdLMdGJz7XcAG6oTMNtqTpn3Yv -p x -d 1 -I 13 -g 2 --thread-concurrency 8192 --gpu-engine 1070 --gpu-memclock 1700 --gpu-fan 100 -w 256 --gpu-powertune 20 --no-submit-stale --remove-disabled

Just trying to help, which I think I have. =] kthx

[Zombie123]

I am doing 2.4MHz and only getting .02-.03 on average. It that normal. I think its a bit less for that rate

[Xamda]

I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

[pindis]

I am doing 2.4MHz and only getting .02-.03 on average. It that normal. I think its a bit less for that rate

Definitely something wrong in ur setup man. I'm getting 0.02 atm at 1.5mhash check for HW errors

[coin123123]

I am doing 2.4MHz and only getting .02-.03 on average. It that normal. I think its a bit less for that rate

750khs~.01-.02/24h
maybe you have hardware errors

I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

tried to undervolt?

[t1000]

Also, check scan time to reduce stale shares. I have mine set to 5 seconds.

[2Alpha]

I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

What's your config look like? -- Edited due to I can not read you are talking about a 280x and I was talking about a 290x

[Pompobit]

I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

What's your config look like? After a bit of tweaking I have got mine up to 900+KH/s with a temp around 84 - 86 depending on fan speed.

900 with a 280x? Hard to believe...

[2Alpha]

I am impressed by the hasrates you all seem to get. None of my R9280Xs go higher than 710 (and they get very hot, above 90 all of them and as a result the speed is sometimes reduced as low as 550).

I guess it is basically a heat problem... But it would be nice to be able to get 750 out of every card, it would mor eor less an extra card for me.

What's your config look like? After a bit of tweaking I have got mine up to 900+KH/s with a temp around 84 - 86 depending on fan speed.

900 with a 280x? Hard to believe...

Sorry with a 290x not a 280x miss read the OP

[Disc]

Have payouts gone out recently?

Still trying to see my stats after my first ~30 hours of mining on this pool.  No payout, no stats yet.

Around 3MH/s so should definitely be over 0.01.

Just wondering if I am doing something wrong. 

Thanks.

[pindis]

Have payouts gone out recently?

Still trying to see my stats after my first ~30 hours of mining on this pool.  No payout, no stats yet.

Around 3MH/s so should definitely be over 0.01.

Just wondering if I am doing something wrong. 

Thanks.

Whats your address?

[Disc]

1NBCeD3nRgTL9sKiwfSmZkwCuFND6TG4Jo

[pindis]

1NBCeD3nRgTL9sKiwfSmZkwCuFND6TG4Jo

Yeah ok, you're not on the list yet. Can you post ur settings? when did you start mining? approx? Also payouts go out at 2:30 am h2o's time. which is 9 hours from now I believe.

[Disc]

Hopefully in ~9 hours I'll see something.

The only thing out of the ordinary I am doing is using a stratum proxy + custom user flag to override the share submits:

   stratum_proxy.exe -o middlecoin.com -p 3333 -cu 1NBCeD3nRgTL9sKiwfSmZkwCuFND6TG4Jo -cp x

Output from the proxy shows the shares getting accepted.

Used this method on many other pools and got credit there.

Thank you for your help. 

[pindis]

Hopefully in ~9 hours I'll see something.

The only thing out of the ordinary I am doing is using a stratum proxy + custom user flag to override the share submits:

   stratum_proxy.exe -o middlecoin.com -p 3333 -cu 1NBCeD3nRgTL9sKiwfSmZkwCuFND6TG4Jo -cp x

Output from the proxy shows the shares getting accepted.

Used this method on many other pools and got credit there.

Thank you for your help. 

What miner are you using? doesn't look like cgminer to me.