RickJamesBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:12:56 AM |
|
I wonder what I am doing wrong. Today was a decent day, but just over .01 per Mh/s for me. A far cry to the .015 that many are reporting. I have been connected to the pool since it's inception and am always between 22 and 24 Mh/s. http://www.middlecoin.com/reports/18Y3Dhw1EdFTfzpVe4bKKhPgsQYuFWERLT.htmlI have 13 rigs with a total of 42 cards active - all either 7950's or R9 280x's. Hottest card is 83, most in the mid to high 70's. CGRemote shows a total of 12 hardware errors and many of these rigs have been weeks without a reboot. The 7950's hash at about 630-670 while the R9 280's are between 690-735. While I haven't done the math on all 42 cards, the ones I glanced at are at least 85% WU vs. Hash Rate. Most of the 7950's are undervolted a bit and so are a few of the R9 280's. Can anyone think of anything that I might be missing? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi7.photobucket.com%2Falbums%2Fy281%2Frandywessels%2FMiners.png&t=665&c=BY2fXuALEYk06w) your numbers look almost exactly where I would guess.
|
|
|
|
grendel25
Legendary
Offline
Activity: 2296
Merit: 1031
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:13:05 AM |
|
So I est you are making about $6K a month on that setup? Problem is I want your setup! Seriously though.. I haven't seen many reporting 1.5 per Mh/s. I've seen many claim 1.3. Looks like some of your reject rates are around 3-5% and I have seen users saying they'v whittled that down to .2%. Work utility needs to be watched. With so many miners you have a greater chance for variance and a lot more to manage.
Oh, and you can't just tell us .01 avg for just today. Give us some moving averages.
Oh and edit again... Have to reiterate the importance of variance with the number of miners you have working. really gets into a matter of watching each one of them and tweaking them all to optimal. If it were me with that setup... I could quit normal life and spend a few hours a day on my mining rigs and the rest of time planning a vacay
|
|
|
|
Cryptos2go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:19:25 AM |
|
ok ok I am very sorry I didn't get it ok my fault.
I under stand now
thanks to those who were kind enough to point this out to me
Wasn't trying to be rude, but its like 3-4 sentences at the top of the page? I could see missing the FAQ since its at the bottom in grey text, eh I dono, whatever. Welcome to the best scrypt pool going. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I wonder what I am doing wrong. Today was a decent day, but just over .01 per Mh/s for me. A far cry to the .015 that many are reporting. I have been connected to the pool since it's inception and am always between 22 and 24 Mh/s. http://www.middlecoin.com/reports/18Y3Dhw1EdFTfzpVe4bKKhPgsQYuFWERLT.htmlI have 13 rigs with a total of 42 cards active - all either 7950's or R9 280x's. Hottest card is 83, most in the mid to high 70's. CGRemote shows a total of 12 hardware errors and many of these rigs have been weeks without a reboot. The 7950's hash at about 630-670 while the R9 280's are between 690-735. While I haven't done the math on all 42 cards, the ones I glanced at are at least 85% WU vs. Hash Rate. Most of the 7950's are undervolted a bit and so are a few of the R9 280's. Can anyone think of anything that I might be missing? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi7.photobucket.com%2Falbums%2Fy281%2Frandywessels%2FMiners.png&t=665&c=BY2fXuALEYk06w) Nice setup, wish I could use cgremote, but it would cost me several hundred $$ for all those copies of windows. Honestly I'm tempted to buy a few copies and some HDD's just so I can use it. Anyway have you tried a restart? It seems I'm getting a little more work after a restart. Not positive though, just seems that way.
|
|
|
|
CSM00
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:23:18 AM |
|
Nice setup, wish I could use cgremote, but it would cost me several hundred $$ for all those copies of windows. Honestly I'm tempted to buy a few copies and some HDD's just so I can use it.
Anyway have you tried a restart? It seems I'm getting a little more work after a restart. Not positive though, just seems that way.
CGremote works with linux miners for at least monitoring - Im using it to watch some Ubuntu miners.
|
|
|
|
rwessels
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 102
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:28:29 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
|
|
|
|
rwessels
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 102
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:29:56 AM |
|
I just used a TechNet license for all of those copies of Windows 7. Although TechNet has been discontinued now so I guess that is no longer an option.
|
|
|
|
Cryptos2go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:33:44 AM |
|
Nice setup, wish I could use cgremote, but it would cost me several hundred $$ for all those copies of windows. Honestly I'm tempted to buy a few copies and some HDD's just so I can use it.
Anyway have you tried a restart? It seems I'm getting a little more work after a restart. Not positive though, just seems that way.
CGremote works with linux miners for at least monitoring - Im using it to watch some Ubuntu miners. Thanks, thats good to know. I'm using various versions of modified BAMT from Bee on litecoin talk forums. I think its Debian? based. Maybe if I could learn to compile it myself or something, I really have no Idea, I'm just barely able to get all this stuff working as it is.
|
|
|
|
SimonG
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:40:32 AM |
|
Doge will end up as one of the most sucessful pump amd dump scam in history....
|
|
|
|
Cryptos2go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:53:43 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
I switched over to one of the beta servers and seemed to be doing a little better. My rigs are all Q-0 S-3 E-6, things still get a little crazy though when we drop a bunch of hash on the little coins. H20 was dividing the pools hash the other day for a while, but I suspect it was done manually? Hopefully he can get it automated.
|
|
|
|
GunPowder
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 06:57:10 AM |
|
Hope, Mr. Owner have already dumped all unexchanged balances. Bad, if not. DOGE turned to down
|
|
|
|
RickJamesBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:00:51 AM |
|
Sonofa.... I got rid of all my doge a while back. oh well. Who's driving that up?
Wooh look at those numbers going up in middlecoin though. Good day.
This is the situation where a pool that stores a percent of coins for good profits would be nice.
|
|
|
|
RickJamesBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:07:24 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
Damn, is your power .40 a kwh?? That's crazy. My power is only .06
|
|
|
|
dgross0818
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:24:26 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
Damn, is your power .40 a kwh?? That's crazy. My power is only .06 Where do you get 0.06 ?!?! I'm at 0.085 here after transmission charges + other fees, however, 0.06 must be hydro :]
|
|
|
|
Cryptos2go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:31:02 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
Damn, is your power .40 a kwh?? That's crazy. My power is only .06 Whats the deal with the risers? Can I add a couple extra pci-e x1 slots via usb? I know thats not what you are selling, just curious. Even if I could would the motherboard/cgminer even see the gpus on the new x1 lanes? I saw some of the these the other day and was tempted, you know for the greater good, but then I thought just because you can doesn't mean you should right?
|
|
|
|
RickJamesBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:33:08 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
Damn, is your power .40 a kwh?? That's crazy. My power is only .06 Whats the deal with the risers? Can I add a couple extra pci-e x1 slots via usb? I know thats not what you are selling, just curious. Even if I could would the motherboard/cgminer even see the gpus on the new x1 lanes? I saw some of the these the other day and was tempted, you know for the greater good, but then I thought just because you can doesn't mean you should right? Not from usb, they let you extend cards from every pci -x slot to a card, if your motherboard will support it. I'm running 5-6 cards on every rig, nice and spaced out on big racks. No overheating problems at all!!
|
|
|
|
Freekje
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:34:23 AM |
|
Nice setup, wish I could use cgremote, but it would cost me several hundred $$ for all those copies of windows. Honestly I'm tempted to buy a few copies and some HDD's just so I can use it.
Anyway have you tried a restart? It seems I'm getting a little more work after a restart. Not positive though, just seems that way.
CGremote works with linux miners for at least monitoring - Im using it to watch some Ubuntu miners. +1 using cgremote with the BAMT os
|
Signatures are so 2014.
|
|
|
Cryptos2go
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 07:42:37 AM |
|
Yeah about 6.2K a month give or take. Electricity is about 1 - 1.2K a month though. I have about 43K into mining hardware and electricity it if you count pre-orders that haven't arrived. If I sold all of my coins today I would be up 9.4K after expenses and still have a bunch of video cards to ebay. I am hoping that 2014 will be a very good year.
Here are the last 14 days BTC numbers with almost the same hash rate. I have numbers all the way back to early August, but I just finished adding cards a few weeks ago. I will have 7 more cards coming up in a week or so when the RMA's come back.
0.268 0.239 0.229 0.209 0.131 0.240 0.251 0.232 0.177 0.172 0.282 0.204 0.172 0.228
The average rate is .217 BTC a day or just less than .01 per Mh/s. I do spend a few hours a day on rig maintenance. I was messing with BIOS's on some of my new R9 280's almost the entire weekend. I guess the next focus is on going to be on reject rates. Thanks for the advice.
Damn, is your power .40 a kwh?? That's crazy. My power is only .06 Whats the deal with the risers? Can I add a couple extra pci-e x1 slots via usb? I know thats not what you are selling, just curious. Even if I could would the motherboard/cgminer even see the gpus on the new x1 lanes? I saw some of the these the other day and was tempted, you know for the greater good, but then I thought just because you can doesn't mean you should right? Not from usb, they let you extend cards from every pci -x slot to a card, if your motherboard will support it. I'm running 5-6 cards on every rig, nice and spaced out on big racks. No overheating problems at all!! Ok thanks, you might want to look into sourcing some x-16? There seems to be a certain Asrock board out there that likes to have the x-16 slot filled. Could be mistaken but thats been my experience so far from what I can tell.
|
|
|
|
RickJamesBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 08:38:34 AM |
|
No, it is usually just the presence pin not connected if you use a normal ribbon cable riser. My cards have the presence pin shorted properly, the card will identify on the board. I have now sold thousands of them, and nobody has had a problem.
|
|
|
|
zoonosis
Copper Member
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 199
Merit: 14
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 09:10:24 AM |
|
I'm getting around 7% rejects on the Asia server. Any tips on config? Or should I just go with one of the US servers?
|
|
|
|
MrJoshwaa
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2014, 09:35:07 AM |
|
I'm getting around 7% rejects on the Asia server. Any tips on config? Or should I just go with one of the US servers?
https://i.imgur.com/YGEaqL8.jpgnope the asian server is just fine.
|
|
|
|
|