DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 07:20:16 AM Last edit: August 21, 2013, 07:40:23 AM by DeathAndTaxes |
|
If Hashfast had designed 4 x 63W chips as I suggested, there would be 4 heatsinks occupying a larger space, hence allowing the use of larger, slower, lower-wattage fans.
Well design your own chip. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) You didn't seriously think they were going to scrap a design and make another one because you don't like it do you. Also you missed the point. There is no fixed amount of surface area needed to cool X watts. It is a curve. The more surface area the less airflow you need all the way down to 0 CFM (passively cooled). A radiator is generally much larger than an air cooled heatsink. It is simple logistics. Trying to mount a 12" x 6" heatsink directly to a chip is difficult (and dangerous as you could damage the die). Using water to move the heat from the chip to a larger surface area is the whole point of water cooling. Simply logistics mean you can't use as large of a heat sink directly air cool a chip, and thus need more airflow = more noise and more wattage. Water cooling also has the advantage of lower delta T and cooler chips use less power. The company believes they have the expertise to design a large efficient processor. If they can there is no reason to use a larger number of less powerful chips. The less integration at the chip level the more integration that is needed at the board level. More wafer cutting, more chip packaging, more complex boards, more supporting components, more fans, more heatsinks, more assembly, etc. A larger number of smaller chips gives you more flexibility and makes cooling less of a challenge but the system isn't going to be cheaper or more importantly assembled faster. Waterblocks are a significant portion of any water loop so if you are going to watercool less blocks is always better (i.e. water cooling two 5970s is going to be cheaper than 4x5870s). There is more than one way to build a miner. The nice thing about competition is you can pick the design you think provides the best chance of success. I think it is great that you have different companies with different high level designs. Bitfury uses almost 200 chips over 16 boards maybe you should look there?
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 07:27:28 AM |
|
Nonsense, you still need to get the heat out of the water, that requires energy spent on fans and pumps, water is only more efficient if the pumps + fans use less power than air cooling fans. With a large radiator you can use larger, slower, lower wattage fans... ...which is a problem created in the first place by the choice of concentrating 250W of heat on a single socket, requiring high airflow over a relatively small space. If Hashfast had designed 4 x 63W chips as I suggested, there would be 4 heatsinks occupying a larger space, hence allowing the use of larger, slower, lower-wattage fans. I thought the Hashfast was 350watts, only 250watts when you under clock it? It's a bit hard to tell from the specs on their site. Chip wattage vs system wattage. Remember you have two voltage conversions plus control boards, and other gear. So the estimate is the entire system will use 350W however for the purpose of discussing the power and cooling of the chip it is only 250W.
|
|
|
|
Beastlymac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 07:53:13 AM |
|
Why HashFast ignore my questions (#561 and #674)? I understand Your bold statements and support from much respectable forum members but this doesn't mean You don't need to respect other forum members.
Ill rephrase them again:
To have working device we need to:
1. Design a chip : Work started: 2011 Status 2013: complete (?) 2. Tape-out : 20/08/2013: Dummy Tape-out 3. Produce Chip : ??Whats You timeline here 4. Design PCB : ??Whats You timeline here 5. Assembly service : ??Whats You timeline here 6. BOM - components preorder : ??Whats You timeline here 7. Create software or adapt existing one : ??Whats You timeline here 8. Design/Adapt Case : ??Whats You timeline here 9. Start shipping : 20-30 October
Do You still support initial claim about shipping dates or shipping date is just a wish we all want to come true?
They have already said they signed a NDA and can't disclose information like that. Also to do with water cooling you can get better temps meaning the chip can hash faster isn't that what everyone wants?
|
Message me if you have any problems
|
|
|
nowywbitcoinowymswiecie
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 71
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 08:33:30 AM |
|
They have already said they signed a NDA and can't disclose information like that. Also to do with water cooling you can get better temps meaning the chip can hash faster isn't that what everyone wants?
I would prefer to get response from HashFast but thank You Beastlymac for quick answer. I was trying to find any info about HashFast NDA agreement originating from HF but cant. Do You suggest that they sign NDA for a whole chain operations? Its ridiculous to me. Do they act only as an chip designers and whole logistics is handled by mysterious contractor? This brings more and more questions. If anyone here cares about being sure Hashfast claims are base on truth - please support me. Hashfast - please find a minute or two to answer me.
|
newbee here 1PkHkAEssCQoarLz6hcmQzF9zbaxGrxdFz
|
|
|
Beastlymac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 08:53:54 AM |
|
They have already said they signed a NDA and can't disclose information like that. Also to do with water cooling you can get better temps meaning the chip can hash faster isn't that what everyone wants?
I would prefer to get response from HashFast but thank You Beastlymac for quick answer. I was trying to find any info about HashFast NDA agreement originating from HF but cant. Do You suggest that they sign NDA for a whole chain operations? Its ridiculous to me. Do they act only as an chip designers and whole logistics is handled by mysterious contractor? This brings more and more questions. If anyone here cares about being sure Hashfast claims are base on truth - please support me. Hashfast - please find a minute or two to answer me. I would assume they have signed a NDA with The foundry and uniquify.
|
Message me if you have any problems
|
|
|
mrb
Legendary
Offline
Activity: 1512
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 09:12:34 AM Last edit: August 22, 2013, 04:24:43 AM by mrb |
|
You didn't seriously think they were going to scrap a design and make another one because you don't like it do you.
Of course not. I commented, because I want to hear Simon's explanation about his company's choice of making a 250W chip, in order to determine how risky an investment in Hashfast would be. The company believes they have the expertise to design a large efficient processor. If they can there is no reason to use a larger number of less powerful chips. The less integration at the chip level the more integration that is needed at the board level. More wafer cutting, more chip packaging, more complex boards, more supporting components, more fans, more heatsinks, more assembly, etc. A larger number of smaller chips gives you more flexibility and makes cooling less of a challenge but the system isn't going to be cheaper or more importantly assembled faster.
"More wafer cutting, more chip packaging": true, but negligible. A Baby Jet costs $5600. At most, a few extra dollars would be spent to slice and package 4 chips instead of 1 per machine. "more complex boards, more supporting components": true, but completely negligible. Look at Avalon: each additional chip on a hash unit has merely 13 supporting components (resistors and ferrite beads, all 0402) which cost at most a few cents. An extra bitcoin mining chip added to a circuit in general does not need much supporting components because all it needs is power and a low speed serial i/o line. "more fans, more heatsinks": false. As you pointed out it's a curve. It's a choice between more heatsink + fewer fans, or less heatsink + more fans. But both solutions, air and water, must be designed to cool 250W regardless. "more assembly": false. The little extra time of pick-and-placing, say 3 extra bga chips, is completely negligible compared to the extra assembly time required to install the water cooling system. I guess Hashfast could save time by shipping systems with the water cooling completely untested and unassembled. But still, the extra time to pick-and-place 3 extra bga chips on a board with 100+ components remains negligible. Air cooling is cheaper and faster to assemble. Nobody argues against that. I am surprised that you do(!)
|
|
|
|
Vbs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 11:17:00 AM Last edit: August 21, 2013, 01:07:42 PM by Vbs |
|
Not sure why this is still a question (goes beyoond just HF). Remember even excluding water cooling pumps, fans, and controller boards there are a lot of efficiency loss between between the wall and the chip. "This is still a question" because Vbs is here to spread FUD about HashFast. He's on ACTM's Board of Cheerleaders, invested more than he can afford to lose, and got married to a competitor's stock that not only became obsolete soon after launch but is also enduring disasters WRT BTC conversion and bulk Avalon orders. At this point, asking dumb questions which have already been answered repeatedly is all he can do to prop up his failing stillborn venture. I'm sorry, who are you again? This kind of ad hominem argumentation is indeed lamentable, so if you have nothing substantial to discuss, please keep to yourself. I'll reiterate my question about the power figures: Simon, the store page says "* Real silicon power consumption may vary from simulation results by +/- 20%" (I assume this means the chip can be between 200-300W), you would really have no problem if it ever comes to be 300/324 = 0.926W/mm^2? It's still 12% more than an o/c SB-E even at an extreme 350/425 = 0.824W/mm^2. Using some quick math for forced convection water cooling, with: Water: 50 - 10.000 (W/m^2K) Chip area (m^2): 0.000324 t_surface = 80ºC t_air = 30ºC q = 10.000*0.000324*(80-30) = 162W, which is a water heat transfer figure under chip requirements, so the heatspreader has to really compensate for the so small chip area!
|
|
|
|
crumbs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 11:44:13 AM Last edit: August 21, 2013, 01:13:59 PM by crumbs |
|
Important to remember that thus far, we're watercooling & clocking a chip that still doesn't exist. If HashFast is as fast & loose with guessing their own specs as they are with KNC's (estimating KNC ASIC die size from package dimensions), allow for +-500% error. While BFL was able to stick on a huge cooler when their power specs proved optimistic, with this chip we're talking power planes hefty enough to run an arc welder & liquid nitrogen cooling. *Ed Trice, if ever there was an opportunity...
|
|
|
|
jspielberg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 11:50:33 AM |
|
I am not sure if I see the problem.
If it gets too hot for the cooler to handle, the chip will heat up, the thermal control software will disable like 1/2 of the chip, and the temperature will come back down. Maybe they will put 2 chips in each unit in that case... that is HF's problem to figure out.
Step 0 have the chip fabricated. First step, get a chip and characterize its performance. Second step, produce system with the characterized chips at stated hashrate. Third ship the system.
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 03:20:40 PM |
|
9. Start shipping : 20-30 October
Do You still support initial claim about shipping dates or shipping date is just a wish we all want to come true?
Of course the October ship date is a pipe dream. If they really believed they could really ship in October, they'd offer refunds at that time, not 2 months later like they are doing.
|
Buy & Hold
|
|
|
FCTaiChi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 03:45:49 PM |
|
Why are all references of Uniquify removed from the HashFast page?
|
|
|
|
|
DPoS
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 07:11:08 PM |
|
Why are all references of Uniquify removed from the HashFast page?
to make room for the sexy girl pics beggin you to BUY BUY BUY
|
|
|
|
qwk
Donator
Legendary
Offline
Activity: 3542
Merit: 3413
Shitcoin Minimalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 21, 2013, 07:28:40 PM |
|
|
Yeah, well, I'm gonna go build my own blockchain. With blackjack and hookers! In fact forget the blockchain.
|
|
|
FCTaiChi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 01:52:09 AM |
|
Thanks guys, the page changed so much in the last couple weeks I lost track.
|
|
|
|
giorgiomassa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 12:22:13 PM |
|
If Hashfast had designed 4 x 63W chips as I suggested, there would be 4 heatsinks occupying a larger space, hence allowing the use of larger, slower, lower-wattage fans.
More wafer cutting, more chip packaging, more complex boards, more supporting components, more fans, more heatsinks, more assembly, etc. A larger number of smaller chips gives you more flexibility and makes cooling less of a challenge but the system isn't going to be cheaper or more importantly assembled faster. Waterblocks are a significant portion of any water loop so if you are going to watercool less blocks is always better (i.e. water cooling two 5970s is going to be cheaper than 4x5870s). Not really, in fact some IC packages cost much less than others just because they're being used more frequently. A package like the one used by them that can withstand such high heat transfer will be very, very expensive, I would say around $20-$30 just that. Waterblock cooling is an useless overhead dictated only by the need to transfer away so much power in such a tight space, it could be avoided by using many smaller chips that are just air cooled. Also don't forget that a wafer is a round thing: the bigger the squares you fit on it, the more area you loose on the edges, here again a smaller chip could have been cheaper, not more expensive. But I agree, it's nice to see different designs popping out, we followed Bitfury's approach too for our ASIC and we're confident that the road to success is huge grids of small and cool chips.
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 01:24:00 PM |
|
But I agree, it's nice to see different designs popping out, we followed Bitfury's approach too for our ASIC and we're confident that the road to success is huge grids of small and cool chips. $6250 700W 85GH/s 8.23W per GH $73 per GH $5600 350W 400GH/s 0.88W per GH $14 per GH
|
|
|
|
jspielberg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 01:28:19 PM |
|
But I agree, it's nice to see different designs popping out, we followed Bitfury's approach too for our ASIC and we're confident that the road to success is huge grids of small and cool chips. $6250 700W 85GH/s 8.23W per GH $73 per GH $5600 350W 400GH/s 0.88W per GH $14 per GH D&T - are you comparing a 110nm asic to a 28nm asic? Would probably be more realistic to at least compare against bitfurys 55-ish nm chip.
|
|
|
|
crumbs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 01:37:57 PM |
|
But I agree, it's nice to see different designs popping out, we followed Bitfury's approach too for our ASIC and we're confident that the road to success is huge grids of small and cool chips. $6250 700W 85GH/s 8.23W per GH $73 per GH $5600 350W 400GH/s 0.88W per GH $14 per GH Cointerra: $8/Gh Butterfly Labs: $8/Gh XCrowd: ~$2/Gh If we're comparing chips that don't exist, let's try to include all of them.
|
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 22, 2013, 01:41:32 PM Last edit: August 22, 2013, 01:59:15 PM by DeathAndTaxes |
|
D&T - are you comparing a 110nm asic to a 28nm asic? Would probably be more realistic to at least compare against bitfurys 55-ish nm chip. I am comparing the product they have available for order. If they have a bitfury based product I would have used that. Still maybe I wasn't clear. A 4 board avalon uses 300 chips correct? They are currently excessively marked up ~$9 ea so lets pretend the price was dropped to ~$1 per chip. That would remove $2400 from the cost of the system. It is easy to see that either the seller has massive profit margin (I doubt it since given the Avalon uncertainty they would prefer to see out of pre-orders) or the BOM (balance of material) on that "huge number of low powered chips" contributes significantly to the overall costs. Lets look at GPUs. With crossfire (some software magic) 2 GPU can split workload. A 7990 is essentially two downclocked 7970s internally crossfired. AMD doesn't try to make a monster single chip 7990 because rightly so there is point where you get diminishing returns on larger and hotter chips. However cross fire isn't limited to two chips. Why not make a single chip of reasonable middle range computing power. Then you could put one chip on a board and call it a 7950, two chips on a board and call it a 7970 and 4 chips on board and call it a 7990. One inventory part, 3 products. There was some research into that (and I am sure AMD/NVidia still are) but having a single unified chip reduces the post-fab assembly production/yeild issues. All I am saying (now in an excessively verbose way) is there are pros and cons to each approach.Take KNC for an example they use 4 chips on their top of the line model. Aha! See even KNC is taking the "more less powerful chips aproach" leaving only HF taking the path less traveled. Except not quite. KNC chip uses roughly the same power as HF. The need to use 4 chips is simply due to a less efficient architecture*. KNC isn't using 3, or 2, or 1 chips because at 250W they (and HF) are reaching the limit of what can be cooled realistically. *Before the KNC warriors attack me this isn't an insult. Just comparing reported specs. It may be that KNC is overly cautious on power projections and HF is overly optimistic. It may be that KNC decided they could make a more efficient chip but time to market was more important and 2.5W per GH was "sufficient". Whatever the reason my point is that KNC needs 4 chips to acheive the same hashing power not because they are taking a "more and cooler" aproach but because that is where they maxed out at. If they were 4x as efficient they would be using a 400 GH/s chip as well.
|
|
|
|
|