ASpieler
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 23, 2021, 05:23:37 PM Last edit: February 23, 2021, 10:09:43 PM by ASpieler |
|
To the devs: Would you be willing to consider compiling Phoenix to run on Linux on an aarch64/armv8 CPU? The Raspberry Pi compute module 4 has support for PCIe desktop graphics cards (via the SOC's PCIe 1x lane and a riser), and I would like to use it for mining. https://datasheets.raspberrypi.org/cm4/cm4-datasheet.pdfEDIT: If such a build would be non-trivial to implement, and you feel it is not worth your time to do so, please give a reply to that effect, so that I, and others know why it isn't coming, even if the why is simply "too much trouble".
|
|
|
|
natewin
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 23, 2021, 05:55:45 PM Last edit: February 23, 2021, 06:25:14 PM by natewin |
|
Can the lower limit on fan speed temp target be removed or made lower than 40? Something like 20 or 30? This will allow for lower mem temps on my card(s) since the fans don't really start to spin up when my temp is 32-35. -tt 40,40 works with limit at 40 -tt 35,35 doesn't report back anything, seems like 40 may be the lower limit. Thanks
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
February 23, 2021, 07:07:22 PM |
|
Can the lower limit on fan speed temp target be removed or made lower than 40? Something like 20 or 30? This will allow for lower mem temps on my card(s) since the fans don't really start to spin up when my temp is 32-35. -tt 40,40 works with limit at 40 -tt 35,35 doesn't report back anything, seems like 40 may be the lower limit. Thanks
you Bios is limited to 40º no limited with PM -tt use MPT put temperature Target 20/30º try it put off Zero Fan
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
February 23, 2021, 07:15:19 PM |
|
i have 4 rx6800xt using the phoenixminer 5.4c...the stales are very high 20-25%..how can i reduce it? ive tried changing the pool region but still the same..can anyone help?
MI RIG WORKING FINE:Eth speed: 342.338 MH/s, shares: 283/0/0, time: 0:57 GPUs: 1: 52.107 MH/s (43) 2: 64.102 MH/s (67) 3: 32.460 MH/s (24) 4: 32.074 MH/s (24) 5: 32.460 MH/s (24) 6: 32.105 MH/s (24) 7: 32.287 MH/s (31) 8: 32.458 MH/s (27) 9: 32.285 MH/s (19) *** 0:57 *** 2/20 15:29 ************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:57 Available GPUs for mining: GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs GPU2: AMD Radeon RX 6800 (pcie Cool, OpenCL 2.0, 16 GB VRAM, 30 CUsGPU3: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU4: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU5: Radeon RX 580 Series (pcie 15), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU6: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU7: Radeon RX 580 Series (pcie 17), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU8: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU9: Radeon RX 580 Series (pcie 19), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU1: 44C 67% 102W, GPU2: 46C 57% 179W, GPU3: 54C 48% 82W, GPU4: 50C 48% 84W, GPU5: 55C 48% 82W, GPU6: 59C 48% 93W, GPU7: 55C 48% 91W, GPU8: 54C 0% 83W, GPU9: 57C 48% 88W GPU1: cclock 1206 MHz, cvddc 806 mV, mclock 1792 MHz, mvddc 850 mV, Tj 50C, Tmem 74C GPU2: cclock 1204 MHz, cvddc 793 mV, mclock 2112 MHz, Tj 50CGPU3: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz GPU4: cclock 1190 MHz, cvddc 856 mV, mclock 2090 MHz GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2100 MHz GPU6: cclock 1190 MHz, cvddc 856 mV, mclock 2080 MHz GPU7: cclock 1190 MHz, cvddc 856 mV, mclock 2095 MHz GPU8: cclock 1200 MHz, cvddc 856 mV, mclock 2112 MHz GPU9: cclock 1190 MHz, cvddc 856 mV, mclock 2095 MHz GPUs power: 883.1 W; cost: 2.86 USD/day Current -gt 27,15,42,67,42,38,40,43,39 Eth: Accepted shares 283 (6 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 2.12% Eth: Maximum difficulty of found share: 1179.6 GH (!) Eth: Average speed (5 min): 341.340 MH/s Eth: Effective speed: 326.88 MH/s; at pool: 326.88 MH/s Eth: Estimated income: 45.48 USD/day WIN 10-20H2 PM 5.5C 20.11.2-Driver WHQL Adrenalin
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
February 23, 2021, 07:19:59 PM |
|
i have 4 rx6800xt using the phoenixminer 5.4c...the stales are very high 20-25%..how can i reduce it? ive tried changing the pool region but still the same..can anyone help?
NOW TODAY Eth speed: 341.049 MH/s, shares: 17310/0/1, time: 57:57GPUs: 1: 52.395 MH/s (2667) 2: 62.912 MH/s (3201) 3: 32.392 MH/s (1627) 4: 32.127 MH/s (1696) 5: 32.385 MH/s (1591) 6: 32.028 MH/s (1609) 7: 32.211 MH/s (1682) 8: 32.390 MH/s (1613/1) 9: 32.209 MH/s (1624) *** 57:57 *** 2/23 20:16 ************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:34 Available GPUs for mining: GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs GPU2: AMD Radeon RX 6800 (pcie , OpenCL 2.0, 16 GB VRAM, 30 CUsGPU3: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU4: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU5: Radeon RX 580 Series (pcie 15), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU6: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU7: Radeon RX 580 Series (pcie 17), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU8: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU9: Radeon RX 580 Series (pcie 19), OpenCL 2.0, 8 GB VRAM, 36 CUs GPU1: 47C 38% 94W, GPU2: 47C 57% 174W, GPU3: 52C 52% 82W, GPU4: 49C 49% 84W, GPU5: 51C 51% 81W, GPU6: 55C 55% 91W, GPU7: 52C 52% 92W, GPU8: 49C 49% 82W, GPU9: 54C 54% 86W GPU1: cclock 1205 MHz, cvddc 756 mV, mclock 1802 MHz, mvddc 850 mV, Tj 52C, Tmem 78C GPU2: cclock 1178 MHz, cvddc 793 mV, mclock 2088 MHz, Tj 51CGPU3: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz GPU4: cclock 1200 MHz, cvddc 856 mV, mclock 2100 MHz GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2100 MHz GPU6: cclock 1190 MHz, cvddc 856 mV, mclock 2080 MHz GPU7: cclock 1190 MHz, cvddc 856 mV, mclock 2095 MHz GPU8: cclock 1200 MHz, cvddc 856 mV, mclock 2112 MHz GPU9: cclock 1190 MHz, cvddc 856 mV, mclock 2095 MHz GPUs power: 865.5 W; cost: 2.80 USD/day Current -gt 38,15,42,70,41,37,39,42,38 Eth: Accepted shares 17310 (10 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 1 (0.01%), est. stales percentage 0.06%Eth: Maximum difficulty of found share: 429.0 TH (!!!) Eth: Average speed (5 min): 340.876 MH/s Eth: Effective speed: 331.80 MH/s; at pool: 331.80 MH/s Eth: Estimated income: 50.50 USD/day
|
|
|
|
doctorman
Newbie
Offline
Activity: 35
Merit: 0
|
|
February 24, 2021, 12:17:49 AM |
|
windows 10 do a system cleanup under disk clean up reinstall MSI afterburner the new version of driver is okay run the cards cooler and lower mem clock I cannot get Pheonix to work more than 4-6 houirs without crashing. Errors 216, 219, 462, 999 All sorts of errors.
I have the latest 461.09 Nvidia drivers. Do I need to downgrade my drivers?
I was mining in my computer with a Gigabyte Geforce RTX 3060Ti 5.5c since february 9th and it was ok. Later, I swaped to a MSI Geforce RTX 3070 on February 12th and it was ok, but a couple of days after that I started to see problems. Since then, I've seen it starts to mine for a couple of minutes (or a couple of hours, I actually can't get the time pattern here), then shows some artifacts on the screen ( https://i.imgur.com/7jkF90H.png) and crashes, rebooting the PC. I was always working with Nvidida drivers 461.40. Right now I'm downgrading to 457.51 version for testing that. Anyone have an idea what could be happening here? Looking into the log files, I see that sometimes it stops randomly (the file ends there) without giving any error. But sometimes the files show some kind of errors like these: 2021.02.12:18:55:39.192: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.12:18:55:39.196: GPU1 GPU1 search error: unknown error 2021.02.12:18:55:39.198: wdog Fatal error detected. Restarting. 2021.02.12:18:55:41.188: main Eth speed: 0.000 MH/s, shares: 63/0/0, time: 1:22 2021.02.12:18:55:42.057: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xb10f847382424686ae3e90635f73a18f98cd9c03647a002baea49dd900e2345e","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb50"]} 2021.02.12:18:55:42.057: eths Eth: New job #b10f8473 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:42.505: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.12:18:55:42.633: main GPU1: 60% 2021.02.12:18:55:43.945: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2fdb5f38896382e201c369209b6ff9b8b9d4cc06ece2f3ddeaebed496b40b75c","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:43.945: eths Eth: New job #2fdb5f38 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:44.252: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x41609475f936b4a4e238f52b00e780bc7cbfa5358854e3326f861b2d21d8b3ca","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:44.252: eths Eth: New job #41609475 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:01.748: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true} 2021.02.21:13:09:01.749: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x750cea9c12d42b76b61c980a1545bd6e693bc7a12490a4fbc1083869283a8cf9","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5994f"]} 2021.02.21:13:09:02.096: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:09:02.096: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:09:02.097: GPU1 GPU1 search error: unknown error 2021.02.21:13:09:02.098: wdog Fatal error detected. Restarting. 2021.02.21:13:09:02.423: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2b6ce5fb860f98940c532b9207a559d08f20d0efcccb9f00fc47f181aa72faad","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.423: eths Eth: New job #2b6ce5fb from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:02.615: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5bc91187170c303dc2947e1d5bbf2fa2e1ab911a1eba6aa6a2544141b6e74663","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.616: eths Eth: New job #5bc91187 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:03.901: main Eth speed: 0.000 MH/s, shares: 22/0/0, time: 0:31 2021.02.21:13:09:06.560: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd385ea208d4bdb8d78b958c948bc6dbb1fe88301a2d1f00d96c2d24db58dc111","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:06.560: eths Eth: New job #d385ea20 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:11:39.238: main *** 0:02 *** 2/21 13:11 ************************************** 2021.02.21:13:11:39.238: main Eth: Mining ETH on ssl://us1.ethermine.org:5555 for 0:02 2021.02.21:13:11:39.238: main Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales) 2021.02.21:13:11:39.238: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% 2021.02.21:13:11:39.238: main Eth: Maximum difficulty of found share: 19.0 GH (!) 2021.02.21:13:11:39.238: main Eth: Average speed (5 min): 51.916 MH/s 2021.02.21:13:11:39.238: main Eth: Effective speed: 88.89 MH/s; at pool: 88.89 MH/s 2021.02.21:13:11:39.238: main 2021.02.21:13:11:40.643: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6f7620ad2471b23fd6b810b1bf83867bdf536129eadb7e361ffcdc4cdfdaddb3","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5995e"]} 2021.02.21:13:11:40.643: eths Eth: New job #6f7620ad from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:11:41.831: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 GPU1 search error: unknown error 2021.02.21:13:11:41.831: wdog Fatal error detected. Restarting. 2021.02.21:13:11:42.392: main Eth speed: 0.000 MH/s, shares: 3/0/0, time: 0:02 2021.02.21:13:11:44.014: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:13:16:11.849: main Eth speed: 51.915 MH/s, shares: 0/0/0, time: 0:00 2021.02.21:13:16:14.511: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x9830b31ad6f538da3773ddb39e70c534aaa5e889b109a9e3aadeb0c7cd9da923","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59977"]} 2021.02.21:13:16:14.511: eths Eth: New job #9830b31a from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:16:15.957: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 GPU1 search error: unknown error 2021.02.21:13:16:15.957: wdog Fatal error detected. Restarting. 2021.02.21:13:16:16.921: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.02.21:23:22:28.835: eths Eth: New job #36a2e139 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:28.863: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 GPU1 search error: unknown error 2021.02.21:23:22:28.863: wdog Fatal error detected. Restarting. 2021.02.21:23:22:29.459: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:03 2021.02.21:23:22:31.819: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:23:22:31.820: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x39865a0","0x67726f38238f0422bcbefb08bd64b5dc32b6cb63381cb91d01ce8188ad102c54"]}
2021.02.21:23:22:32.000: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x36a2e139aee6782c36d135ed5bbc1cb936b23919f3ae3bcd69e89dc5bb9e48ca","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.776: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.21:23:22:32.844: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xf211f60e309aeb7087c64a517c4f4468360457d49c9390e855969b1ddb4966bd","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.844: eths Eth: New job #f211f60e from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:32.900: main GPU1: 38% 2021.02.21:23:22:34.562: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:04
|
|
|
|
brooklynite1
Member
Offline
Activity: 630
Merit: 10
In BTCz we trust. Organic slow growth.
|
|
February 24, 2021, 01:53:18 AM Last edit: February 24, 2021, 02:03:53 AM by brooklynite1 |
|
windows 10 do a system cleanup under disk clean up reinstall MSI afterburner the new version of driver is okay run the cards cooler and lower mem clock I cannot get Pheonix to work more than 4-6 houirs without crashing. Errors 216, 219, 462, 999 All sorts of errors.
I have the latest 461.09 Nvidia drivers. Do I need to downgrade my drivers?
I was mining in my computer with a Gigabyte Geforce RTX 3060Ti 5.5c since february 9th and it was ok. Later, I swaped to a MSI Geforce RTX 3070 on February 12th and it was ok, but a couple of days after that I started to see problems. Since then, I've seen it starts to mine for a couple of minutes (or a couple of hours, I actually can't get the time pattern here), then shows some artifacts on the screen ( ) and crashes, rebooting the PC. I was always working with Nvidida drivers 461.40. Right now I'm downgrading to 457.51 version for testing that. Anyone have an idea what could be happening here? Looking into the log files, I see that sometimes it stops randomly (the file ends there) without giving any error. But sometimes the files show some kind of errors like these: 2021.02.12:18:55:39.192: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.12:18:55:39.196: GPU1 GPU1 search error: unknown error 2021.02.12:18:55:39.198: wdog Fatal error detected. Restarting. 2021.02.12:18:55:41.188: main Eth speed: 0.000 MH/s, shares: 63/0/0, time: 1:22 2021.02.12:18:55:42.057: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xb10f847382424686ae3e90635f73a18f98cd9c03647a002baea49dd900e2345e","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb50"]} 2021.02.12:18:55:42.057: eths Eth: New job #b10f8473 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:42.505: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.12:18:55:42.633: main GPU1: 60% 2021.02.12:18:55:43.945: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2fdb5f38896382e201c369209b6ff9b8b9d4cc06ece2f3ddeaebed496b40b75c","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:43.945: eths Eth: New job #2fdb5f38 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:44.252: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x41609475f936b4a4e238f52b00e780bc7cbfa5358854e3326f861b2d21d8b3ca","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:44.252: eths Eth: New job #41609475 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:01.748: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true} 2021.02.21:13:09:01.749: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x750cea9c12d42b76b61c980a1545bd6e693bc7a12490a4fbc1083869283a8cf9","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5994f"]} 2021.02.21:13:09:02.096: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:09:02.096: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:09:02.097: GPU1 GPU1 search error: unknown error 2021.02.21:13:09:02.098: wdog Fatal error detected. Restarting. 2021.02.21:13:09:02.423: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2b6ce5fb860f98940c532b9207a559d08f20d0efcccb9f00fc47f181aa72faad","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.423: eths Eth: New job #2b6ce5fb from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:02.615: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5bc91187170c303dc2947e1d5bbf2fa2e1ab911a1eba6aa6a2544141b6e74663","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.616: eths Eth: New job #5bc91187 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:03.901: main Eth speed: 0.000 MH/s, shares: 22/0/0, time: 0:31 2021.02.21:13:09:06.560: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd385ea208d4bdb8d78b958c948bc6dbb1fe88301a2d1f00d96c2d24db58dc111","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:06.560: eths Eth: New job #d385ea20 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:11:39.238: main *** 0:02 *** 2/21 13:11 ************************************** 2021.02.21:13:11:39.238: main Eth: Mining ETH on ssl://us1.ethermine.org:5555 for 0:02 2021.02.21:13:11:39.238: main Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales) 2021.02.21:13:11:39.238: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% 2021.02.21:13:11:39.238: main Eth: Maximum difficulty of found share: 19.0 GH (!) 2021.02.21:13:11:39.238: main Eth: Average speed (5 min): 51.916 MH/s 2021.02.21:13:11:39.238: main Eth: Effective speed: 88.89 MH/s; at pool: 88.89 MH/s 2021.02.21:13:11:39.238: main 2021.02.21:13:11:40.643: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6f7620ad2471b23fd6b810b1bf83867bdf536129eadb7e361ffcdc4cdfdaddb3","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5995e"]} 2021.02.21:13:11:40.643: eths Eth: New job #6f7620ad from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:11:41.831: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 GPU1 search error: unknown error 2021.02.21:13:11:41.831: wdog Fatal error detected. Restarting. 2021.02.21:13:11:42.392: main Eth speed: 0.000 MH/s, shares: 3/0/0, time: 0:02 2021.02.21:13:11:44.014: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:13:16:11.849: main Eth speed: 51.915 MH/s, shares: 0/0/0, time: 0:00 2021.02.21:13:16:14.511: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x9830b31ad6f538da3773ddb39e70c534aaa5e889b109a9e3aadeb0c7cd9da923","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59977"]} 2021.02.21:13:16:14.511: eths Eth: New job #9830b31a from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:16:15.957: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 GPU1 search error: unknown error 2021.02.21:13:16:15.957: wdog Fatal error detected. Restarting. 2021.02.21:13:16:16.921: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.02.21:23:22:28.835: eths Eth: New job #36a2e139 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:28.863: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 GPU1 search error: unknown error 2021.02.21:23:22:28.863: wdog Fatal error detected. Restarting. 2021.02.21:23:22:29.459: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:03 2021.02.21:23:22:31.819: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:23:22:31.820: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x39865a0","0x67726f38238f0422bcbefb08bd64b5dc32b6cb63381cb91d01ce8188ad102c54"]}
2021.02.21:23:22:32.000: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x36a2e139aee6782c36d135ed5bbc1cb936b23919f3ae3bcd69e89dc5bb9e48ca","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.776: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.21:23:22:32.844: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xf211f60e309aeb7087c64a517c4f4468360457d49c9390e855969b1ddb4966bd","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.844: eths Eth: New job #f211f60e from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:32.900: main GPU1: 38% 2021.02.21:23:22:34.562: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:04
My problem is somewhat fixed. windows 10 - its fresh install reinstall MSI afterburner - its new install the new version of driver is okay - this is most probably the issue, I tried latest and two version ago run the cards cooler and lower mem clock - I have a fan blowing and regular speed on cards, so thats not an issue,. I have ETHpill dont think thats the issue. T Try older drivers (I didnt but still crashed). I also swapped power from PSU still crashed. BUT I think I know what is the issue. I separated the 1080Ti from the 4 x 1070 cards and now they are running separately. The single 1080Ti, now in its own system, is running completely fine with -straps 2, no artifacting, so far 24 hours no crash. The 4 x 1070 rig crashed after 4 hours and I reset and now its 14 hours no crash. Fingers crossed. In a multi GPU rig setup like I had before, I think the -straps 2 will not work right. -straps 2 confirmed to speed up the mining almost exactly as the ethpill (which may be full of trojan, but unconfirmed)
|
|
|
|
lexfazio
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 04:34:39 AM |
|
I cannot get Pheonix to work more than 4-6 houirs without crashing. Errors 216, 219, 462, 999 All sorts of errors.
I have the latest 461.09 Nvidia drivers. Do I need to downgrade my drivers?
I was mining in my computer with a Gigabyte Geforce RTX 3060Ti 5.5c since february 9th and it was ok. Later, I swaped to a MSI Geforce RTX 3070 on February 12th and it was ok, but a couple of days after that I started to see problems. Since then, I've seen it starts to mine for a couple of minutes (or a couple of hours, I actually can't get the time pattern here), then shows some artifacts on the screen ( https://i.imgur.com/7jkF90H.png) and crashes, rebooting the PC. I was always working with Nvidida drivers 461.40. Right now I'm downgrading to 457.51 version for testing that. Anyone have an idea what could be happening here? Looking into the log files, I see that sometimes it stops randomly (the file ends there) without giving any error. But sometimes the files show some kind of errors like these: 2021.02.12:18:55:39.192: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.12:18:55:39.196: GPU1 GPU1 search error: unknown error 2021.02.12:18:55:39.198: wdog Fatal error detected. Restarting. 2021.02.12:18:55:41.188: main Eth speed: 0.000 MH/s, shares: 63/0/0, time: 1:22 2021.02.12:18:55:42.057: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xb10f847382424686ae3e90635f73a18f98cd9c03647a002baea49dd900e2345e","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb50"]} 2021.02.12:18:55:42.057: eths Eth: New job #b10f8473 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:42.505: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.12:18:55:42.633: main GPU1: 60% 2021.02.12:18:55:43.945: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2fdb5f38896382e201c369209b6ff9b8b9d4cc06ece2f3ddeaebed496b40b75c","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:43.945: eths Eth: New job #2fdb5f38 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.12:18:55:44.252: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x41609475f936b4a4e238f52b00e780bc7cbfa5358854e3326f861b2d21d8b3ca","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]} 2021.02.12:18:55:44.252: eths Eth: New job #41609475 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:01.748: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true} 2021.02.21:13:09:01.749: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x750cea9c12d42b76b61c980a1545bd6e693bc7a12490a4fbc1083869283a8cf9","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5994f"]} 2021.02.21:13:09:02.096: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:09:02.096: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:09:02.097: GPU1 GPU1 search error: unknown error 2021.02.21:13:09:02.098: wdog Fatal error detected. Restarting. 2021.02.21:13:09:02.423: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2b6ce5fb860f98940c532b9207a559d08f20d0efcccb9f00fc47f181aa72faad","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.423: eths Eth: New job #2b6ce5fb from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:02.615: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5bc91187170c303dc2947e1d5bbf2fa2e1ab911a1eba6aa6a2544141b6e74663","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:02.616: eths Eth: New job #5bc91187 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:09:03.901: main Eth speed: 0.000 MH/s, shares: 22/0/0, time: 0:31 2021.02.21:13:09:06.560: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd385ea208d4bdb8d78b958c948bc6dbb1fe88301a2d1f00d96c2d24db58dc111","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]} 2021.02.21:13:09:06.560: eths Eth: New job #d385ea20 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:11:39.238: main *** 0:02 *** 2/21 13:11 ************************************** 2021.02.21:13:11:39.238: main Eth: Mining ETH on ssl://us1.ethermine.org:5555 for 0:02 2021.02.21:13:11:39.238: main Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales) 2021.02.21:13:11:39.238: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% 2021.02.21:13:11:39.238: main Eth: Maximum difficulty of found share: 19.0 GH (!) 2021.02.21:13:11:39.238: main Eth: Average speed (5 min): 51.916 MH/s 2021.02.21:13:11:39.238: main Eth: Effective speed: 88.89 MH/s; at pool: 88.89 MH/s 2021.02.21:13:11:39.238: main 2021.02.21:13:11:40.643: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6f7620ad2471b23fd6b810b1bf83867bdf536129eadb7e361ffcdc4cdfdaddb3","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5995e"]} 2021.02.21:13:11:40.643: eths Eth: New job #6f7620ad from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:11:41.831: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:11:41.831: GPU1 GPU1 search error: unknown error 2021.02.21:13:11:41.831: wdog Fatal error detected. Restarting. 2021.02.21:13:11:42.392: main Eth speed: 0.000 MH/s, shares: 3/0/0, time: 0:02 2021.02.21:13:11:44.014: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:13:16:11.849: main Eth speed: 51.915 MH/s, shares: 0/0/0, time: 0:00 2021.02.21:13:16:14.511: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x9830b31ad6f538da3773ddb39e70c534aaa5e889b109a9e3aadeb0c7cd9da923","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59977"]} 2021.02.21:13:16:14.511: eths Eth: New job #9830b31a from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:13:16:15.957: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:13:16:15.957: GPU1 GPU1 search error: unknown error 2021.02.21:13:16:15.957: wdog Fatal error detected. Restarting. 2021.02.21:13:16:16.921: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.02.21:23:22:28.835: eths Eth: New job #36a2e139 from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:28.863: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999) 2021.02.21:23:22:28.863: GPU1 GPU1 search error: unknown error 2021.02.21:23:22:28.863: wdog Fatal error detected. Restarting. 2021.02.21:23:22:29.459: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:03 2021.02.21:23:22:31.819: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:23:22:31.820: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x39865a0","0x67726f38238f0422bcbefb08bd64b5dc32b6cb63381cb91d01ce8188ad102c54"]}
2021.02.21:23:22:32.000: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x36a2e139aee6782c36d135ed5bbc1cb936b23919f3ae3bcd69e89dc5bb9e48ca","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.776: hwmc GPU1: unable to get temperature - Unknown Error (999) 2021.02.21:23:22:32.844: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xf211f60e309aeb7087c64a517c4f4468360457d49c9390e855969b1ddb4966bd","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]} 2021.02.21:23:22:32.844: eths Eth: New job #f211f60e from ssl://us1.ethermine.org:5555; diff: 4000MH 2021.02.21:23:22:32.900: main GPU1: 38% 2021.02.21:23:22:34.562: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:04
try changing your riser if you are using one I'm not using any risers here because it's my own PC. I've just tried previous nvidia drivers but it was the same. Same with HiveOs with phoenixminer. Right now I'm trying NBminer with HiveOS. 25 minutes have passed yet, so I will be waiting for this test for hours if it doesn't crash before.
|
|
|
|
lexfazio
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 04:41:00 AM |
|
windows 10 do a system cleanup under disk clean up reinstall MSI afterburner the new version of driver is okay run the cards cooler and lower mem clock I cannot get Pheonix to work more than 4-6 houirs without crashing. Errors 216, 219, 462, 999 All sorts of errors.
I have the latest 461.09 Nvidia drivers. Do I need to downgrade my drivers?
I was mining in my computer with a Gigabyte Geforce RTX 3060Ti 5.5c since february 9th and it was ok. Later, I swaped to a MSI Geforce RTX 3070 on February 12th and it was ok, but a couple of days after that I started to see problems. Since then, I've seen it starts to mine for a couple of minutes (or a couple of hours, I actually can't get the time pattern here), then shows some artifacts on the screen ( https://i.imgur.com/7jkF90H.png) and crashes, rebooting the PC. I did everything you mention and it crashed anyway. Even without overclocking, just default. I've tried previous nvidia drivers but it was the same. Same with HiveOs with phoenixminer. Right now I'm trying NBminer with HiveOS. 30 minutes have passed yet, so I will be waiting for this test for hours if it doesn't crash before.
|
|
|
|
nucryptoenterprise
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 24, 2021, 05:17:34 AM |
|
Hey been trying to figure this out forever and can't seem to find a solution to this error every time I'm running the miner bat file which says
"phoenixminer.exe' is not recognized as an internal or external command, operable program or batch file
It will then quit out the program...
I tried everything from reinstalling, adding exclusions to the folder in the anti virus settings , and even turned off firewall. Nothing seems to work and can't proceed.
one thing I did notice is that when I extracted the file I don't see a phoenixminer.exe in the folder; only a eio.exe
I downloaded from the links provided from this thread too and look through the different versions and extracted and don't see the exe file
Any input would be appreciated thanks
|
|
|
|
sirmathew
Newbie
Offline
Activity: 12
Merit: 0
|
|
February 24, 2021, 05:48:03 AM |
|
Hey been trying to figure this out forever and can't seem to find a solution to this error every time I'm running the miner bat file which says
"phoenixminer.exe' is not recognized as an internal or external command, operable program or batch file
It will then quit out the program...
I tried everything from reinstalling, adding exclusions to the folder in the anti virus settings , and even turned off firewall. Nothing seems to work and can't proceed.
one thing I did notice is that when I extracted the file I don't see a phoenixminer.exe in the folder; only a eio.exe
I downloaded from the links provided from this thread too and look through the different versions and extracted and don't see the exe file
Any input would be appreciated thanks
It seems to me that your antivirus have removed phoenixminer.exe Download again from the link provided at first page with your antivirus disabled and have the folder where you download/use phoenixminer exluded in antivirus.
|
|
|
|
brooklynite1
Member
Offline
Activity: 630
Merit: 10
In BTCz we trust. Organic slow growth.
|
|
February 24, 2021, 06:48:36 AM |
|
Hey been trying to figure this out forever and can't seem to find a solution to this error every time I'm running the miner bat file which says
"phoenixminer.exe' is not recognized as an internal or external command, operable program or batch file
It will then quit out the program...
I tried everything from reinstalling, adding exclusions to the folder in the anti virus settings , and even turned off firewall. Nothing seems to work and can't proceed.
one thing I did notice is that when I extracted the file I don't see a phoenixminer.exe in the folder; only a eio.exe
I downloaded from the links provided from this thread too and look through the different versions and extracted and don't see the exe file
Any input would be appreciated thanks
I had this issue yesterday. AVG was removing the file without even saying ANYTHING or any notification. At least Kaspersky and Avast let you know and give you an option to call the file "safe" but AVG just removes it silently. So after 30 minutes of Googling I found out how to add the file to safe list in AVG. I wish these antivirus guys would actually LOOK at mining software and help us avoid viruses instead of taking the lazy route and calling ANYTHING AND EVERYTHING that has to do with mining a virus.
|
|
|
|
theai
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 08:07:30 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
|
|
|
|
brooklynite1
Member
Offline
Activity: 630
Merit: 10
In BTCz we trust. Organic slow growth.
|
|
February 24, 2021, 08:49:29 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725
|
|
|
|
theai
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 08:56:44 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725I am not here to debate about what is the best mining solution! I do have an spear rtx3090 that is not fully utilize. So going back to my original question! what will be the optimal set of parameters for a RTX-3090 mining ETH?
|
|
|
|
brooklynite1
Member
Offline
Activity: 630
Merit: 10
In BTCz we trust. Organic slow growth.
|
|
February 24, 2021, 08:58:22 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725I am not here to debate about what is the best mining solution! I do have an spear rtx3090 that is not fully utilize. So going back to my original question! what will be the optimal set of parameters for a RTX-3090 mining ETH? Here you go: https://www.nicehash.com/blog/post/nvidia-geforce-rtx-3090-mining-hashrate
|
|
|
|
theai
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 09:03:45 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725I am not here to debate about what is the best mining solution! I do have an spear rtx3090 that is not fully utilize. So going back to my original question! what will be the optimal set of parameters for a RTX-3090 mining ETH? Here you go: https://www.nicehash.com/blog/post/nvidia-geforce-rtx-3090-mining-hashrateAre you joking or what? I am asking about the Phoenix parameters! I am not using NiceCrap!
|
|
|
|
brooklynite1
Member
Offline
Activity: 630
Merit: 10
In BTCz we trust. Organic slow growth.
|
|
February 24, 2021, 09:42:49 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725I am not here to debate about what is the best mining solution! I do have an spear rtx3090 that is not fully utilize. So going back to my original question! what will be the optimal set of parameters for a RTX-3090 mining ETH? Here you go: https://www.nicehash.com/blog/post/nvidia-geforce-rtx-3090-mining-hashrateAre you joking or what? I am asking about the Phoenix parameters! I am not using NiceCrap! Sorry I thought you need the OC settings which impact your mining. That is what I understood when you said "Optimal". Other settings in Phoenix do different things, but rarely impact speed. For example they show a time stamp or stop logging which fills the hard drive, or pausing after an error so you can see what happened and why it crashed, or set -straps 2 which I use for my 1080Ti. None of these are intended to Optimize your mining, just gives you more information. Maybe helps you set overclocking in the bat file so you dont have to manually do it in MSI. To optimize your speed to 120, If you have MSI Afterburner, that link even shows you a screen shot. I think you can also set the parameters using Phoenixminer - type settings but I personally dont do that, I just use MSI since I only have a few miners and I can manually do it. From that website: 120 MH/s with a +1350 memory clock and a 100% power limit GPU is consuming 300W of power. If the power limit is lowered, the hash rates starts to drop dramatically.
|
|
|
|
theai
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 24, 2021, 09:49:56 AM |
|
Do you guys know what will be the optimal set of parameters for a RTX-3090 mining ETH?
I dont but I know how you can increase your hashrate by 60%: 1. Sell the 3090 for $2500 2. Buy 2 x 3080s for $2500 3. Watch your hashrate go from 119 to 190 (60% increase for free) 4. Enjoy much higher resale value in 3 years for 2x3080 vs 1x3090 Not trying to be smart, just letting you know the reality. 3090 is not an ideal card for mining for its street cost and you should sell it while it trades for over $2500 still: https://docs.google.com/spreadsheets/d/1skWc9l2iQtD1IqSxHeqE3vL_D-2lgDqcdtaQ9SDk_nI/edit#gid=482228725I am not here to debate about what is the best mining solution! I do have an spear rtx3090 that is not fully utilize. So going back to my original question! what will be the optimal set of parameters for a RTX-3090 mining ETH? Here you go: https://www.nicehash.com/blog/post/nvidia-geforce-rtx-3090-mining-hashrateAre you joking or what? I am asking about the Phoenix parameters! I am not using NiceCrap! Sorry I thought you need the OC settings which impact your mining. That is what I understood when you said "Optimal". Other settings in Phoenix do different things, but rarely impact speed. For example they show a time stamp or stop logging which fills the hard drive, or pausing after an error so you can see what happened and why it crashed, or set -straps 2 which I use for my 1080Ti. None of these are intended to Optimize your mining, just gives you more information. Maybe helps you set overclocking in the bat file so you dont have to manually do it in MSI. To optimize your speed to 120, If you have MSI Afterburner, that link even shows you a screen shot. I think you can also set the parameters using Phoenixminer - type settings but I personally dont do that, I just use MSI since I only have a few miners and I can manually do it. From that website: 120 MH/s with a +1350 memory clock and a 100% power limit GPU is consuming 300W of power. If the power limit is lowered, the hash rates starts to drop dramatically. I do have my board OC and is stable already the OC is not what I am after! I am after the optimal set of "PhoenixMiner" set of parameters
|
|
|
|
serjj
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 24, 2021, 09:51:33 AM |
|
hi, will -cvddc <n> and -mvddc <n> work for rtx3070 in PhoenixMiner_5.5c_Windows10?
|
|
|
|
|