KevG
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 22, 2021, 08:08:19 PM |
|
|
|
|
|
Hdom
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 22, 2021, 09:36:22 PM |
|
Hello, sometimes my miners turn off randomly, using 5.6d but I was also encountering the same issue on 5.4c. There is no indication of why, looking at the logs all of the GPUs are reporting a proper hash and then I see this message 2021.05.19:05:14:23.233: unkn Quitting... then all of the GPUs reset and the program closes. Any ideas?
|
|
|
|
dafuq8008
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 22, 2021, 10:18:37 PM |
|
Hello, sometimes my miners turn off randomly, using 5.6d but I was also encountering the same issue on 5.4c. There is no indication of why, looking at the logs all of the GPUs are reporting a proper hash and then I see this message 2021.05.19:05:14:23.233: unkn Quitting... Any ideas? Windows? Ubuntu? Check the corresponding times in your system logs and see what happened at that time. then all of the GPUs reset and the program closes.
|
|
|
|
tassu
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 23, 2021, 11:22:24 AM |
|
Hey hey
I tried to start dual mining directly to Nicehash. So i edited the "start miner" with the line
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal "my NH btc wallet" -pass x -proto 4 -stales 0 -dpool blake2s.eu.nicehash.com:3361 -dwal "my NH btc wallet" -dcoin blake2s
it logs in nicely, creates dag files for both eth and blake but the last i see is 93%, black screen and a crash.
the last lines are:
2021.05.23:13:13:21.958: eths Eth: New job #9cfb8e04 from daggerhashimoto.eu.nicehash.com:3353; diff: 841MH 2021.05.23:13:13:22.766: GPU1 GPU1: DAG 66% 2021.05.23:13:13:24.134: duas B2S: Received: {"id":null,"method":"mining.set_extranonce","params":["38001a5d66",7]} 2021.05.23:13:13:24.134: duas B2S: Extranonce set to 38001a5d66, Extranonce2 size set to 7 2021.05.23:13:13:24.138: duas B2S: Received: {"id":null,"method":"mining.set_difficulty","params":[335.665284]} 2021.05.23:13:13:24.138: duas B2S: Difficulty set to 335.665 2021.05.23:13:13:24.138: duas B2S: Received: {"id":null,"method":"mining.notify","params":["000000005a09cb27","39a12d0ea35019a946c57aeeabdd16491c5c2cacb65d1b395df4f606da4adc48","01000000dc38aa60010000000000000000000000000000000000000000000000000000000000000 000ffffffff5603e83b4c04e038aa600cfabe6d6d00000000000000000000000000000000000000 000000000000000000000000000100000000000000","1361613331373964316463373262613833343031000000000100e1f50500000000232103b4408a4 f116eed4b84d91359fdeef926adb190541a453e086731ddbdd9d5fd95ac00000000",[],"00002004","1a00e576","60aa38dc",true]} 2021.05.23:13:13:24.138: duas B2S: New job #39a12d0e from blake2s.eu.nicehash.com:3361; diff: 1441.7GH 2021.05.23:13:13:24.324: GPU1 GPU1: DAG 79% 2021.05.23:13:13:24.971: eths Eth: Received: {"id":null,"method":"mining.notify","params":["0000000002fc67b8","4e3ddcd7ec440d547ecccd5de996fcf23812de738753c220ecfbefec978d1a6e","ff66976154dc406bb793725bdaa78bd55e310eb0880d919ed10b9a528b917350",true]} 2021.05.23:13:13:24.971: eths Eth: New job #ff669761 from daggerhashimoto.eu.nicehash.com:3353; diff: 841MH 2021.05.23:13:13:25.842: GPU1 GPU1: DAG 93% 2021.05.23:13:13:26.701: GPU1 GPU1: DAG generated in 11.8 s (368.4 MB/s) 2021.05.23:13:13:26.702: GPU1 GPU1: Using Ethash/Blake2s OCL kernels (gfx900; -clkernel 1) 2021.05.23:13:13:26.752: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 2021.05.23:13:13:26.752: main B2S speed: 0.000 MH/s, shares: 0/0/0 2021.05.23:13:13:27.942: eths Eth: Received: {"id":null,"method":"mining.notify","params":["0000000002fc67b9","4e3ddcd7ec440d547ecccd5de996fcf23812de738753c220ecfbefec978d1a6e","44cbb8bdb094cddafd7a1114f5c8490b15f7631619c7f24313d2c75b4279cbca",true]}
for eth only works fine at 47.2 MH/s on Vega 64. Newest driver.
Am I missing something obvious?
|
|
|
|
SamaelDNM
Member
Offline
Activity: 732
Merit: 18
New exchange generation
|
|
May 24, 2021, 03:35:18 AM |
|
Can I dual mine ETH + ZIL with this miner using 2 different pools?
|
|
|
|
Verbl Kint
Jr. Member
Offline
Activity: 33
Merit: 1
|
|
May 24, 2021, 06:47:20 AM |
|
I give up on trying to fix this issue on my own. I'm turning to the community for help. Here's the deal. HiveOS running Phoenixminer 5.6d with 6 RX 5700XT Sapphire Pulse cards. They're running really hot! They all have the exact same memory type (Micron) and are all flashed with the exact same bios. My tuning commands are simply: -tt 90 -fanmin 95 My clocks are as follows: (these seem to be the most stable and optimal during the Spring/Summer months) FAN 99 CORE 1400 VDD 800 MEM 910 MVDD 1300 VDDCI 800
Now some cards are running at 57MH/s. That's fine. That's what I want... at minimum. Those temperatures are 68 Core and 102 Memory. But others are 50MH/s and temperatures are 74 Core and 106 Memory. So I'm chalking it up to thermal throttling.
Okay. So let's boost the fan speeds... but the fans are already set to 99%. But HiveOS is telling me that the fans are only running at speeds between 81% - 88%. No where near the 99% that I've set the command (-tt 90 -fanmin 95) to. Where did I screw up?
Drivers 20.40 Kernel 5.4.80 OS Ver 0.6-203@210519
You're really pushing the limits of those 5700 xts. I have 6 5700 xt red devils running: 1350 gpu/850 volts/885 memory, and the memory timings from 1500 MHz. I'm getting about 54.7 mh/s. Fans run ~24% with temps in the low to mid 50s for the gpu (I'm on ubuntu so I'm not sure of the memory temp). They are rock solid. That is slower than your top, but about the same considering your throttling. It's up to you, but your only option is to scale back your memory or open them up and put in better thermal pads. (I'd suspect your cards would last longer too.) It's all about winning or losing the silicon lottery. It's hard to treat them all the same. My HiveOS settings for my RX 5700 (non-XT) Red Dragon are core: 1380, dpm: 5, VDD: 780, Mem 905. With the above settings I get a steady 55+ MHs at 100w. This is with the BIOS mod (copypasta memory timings). On TeamRedMiner, I get 44.8 MHs at most but have to bump up mem to 910. It's about 36-40C outside my house right now and my fan is set to 80 but rarely gets there (usually at 78 most). I have a box fan pointed to my rig which blows the hot air to a window.
|
|
|
|
Shivoreun
Member
Offline
Activity: 130
Merit: 10
|
|
May 24, 2021, 09:21:56 AM |
|
Can I dual mine ETH + ZIL with this miner using 2 different pools?
Have the same question! Didn't find in documentation anything like pool-strategy option, to switch to pool with lowest epoch..
|
P.S. Sorry for errors in English - it's not my native language...
|
|
|
Viecoin
|
|
May 24, 2021, 03:02:02 PM |
|
The latest 5.6d version in Hiveos is seeming much more stable for my NVidia rigs than TRex. Higher hashrate doesn't matter if the rig randomly stops mining while I sleep. Thank you for your effort.
|
|
|
|
artful
Newbie
Offline
Activity: 59
Merit: 0
|
|
May 24, 2021, 09:22:30 PM |
|
Ubuntu 20.04 drivers install from amdgpu-pro-21.10-1247438-ubuntu-20.04.tar.xz Phoenix Miner 5.6d Linux/gcc - Release build --------------------------------------------
Phoenix Miner 5.6d Linux/gcc - Release build Cmd line: -gbase 0 -gt 9 -pool ***:3353 -wal ***.*** -log 0 -cdm 0 -rmode 0 -proto 4 -stales 0 -log 2 No CUDA driver found OpenCL driver version: 21.10-124x-orca No avaiable GPUs for mining. Please check your drivers and/or hardware. Exit code: 8
========================ROCm System Management Interface======================== ================================================================================ GPU Temp AvgPwr SCLK MCLK Fan Perf PwrCap VRAM% GPU% 0 27.0c 23.0W 1630Mhz 945Mhz 0.0% manual 220.0W 0% 0% 1 26.0c 24.0W 1600Mhz 945Mhz 0.0% manual 220.0W 0% 0% 2 24.0c 22.0W 1630Mhz 945Mhz 0.0% manual 260.0W 0% 0% 3 29.0c 34.0W 1630Mhz 945Mhz 0.0% manual 220.0W 0% 0% ================================================================================ ==============================End of ROCm SMI Log ==============================
3xVega64 1xFrontier Edition
why error ?
|
|
|
|
lallutrader
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 25, 2021, 04:11:40 AM |
|
I upgraded to 5.6d and I use us1 pool.. my reported hash is 450 but the current hash is not going over 350.. why my cards are not getting enough load.. are the pools not busy due to the current drop in prices? Thx
Using Phoenix and ethermine pools on windows
|
|
|
|
|
dombrizzle
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 25, 2021, 06:59:01 AM |
|
What scumbags nicehash are. Trying to smear a good program so they can get more miners using their crap so they make more money in the end. Fuck them. Been using Phoenix for awhile now and its been good, seen performance increases with the latest version, especially with my 1080ti and ethenlargementpills. Thanks Dev.
edit: hit enter accidentally
|
|
|
|
Hdom
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 25, 2021, 05:53:13 PM |
|
Hello, sometimes my miners turn off randomly, using 5.6d but I was also encountering the same issue on 5.4c. There is no indication of why, looking at the logs all of the GPUs are reporting a proper hash and then I see this message 2021.05.19:05:14:23.233: unkn Quitting... Any ideas? Windows? Ubuntu? Check the corresponding times in your system logs and see what happened at that time. Windows 10, I have checked the system logs the first time it happened and there was nothing out of the ordinary, its been happening on all 4 of my machines, the only thing I have noticed is that the log size after it failes is always around 108 MB. My log file settings are currently -log 1 -logfile log*.txt -logdir c:\somedirectory\logs
I am going to try setting the logsmaxsize to unlimited to see if that changes anything but it says the default is 200MB so I don't see how it could be related.
|
|
|
|
|
BunnyHunter
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 26, 2021, 12:49:26 PM |
|
How to mine DBIX with phoenixminer? How the command line should look like?
|
|
|
|
snappleapple100
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 26, 2021, 01:24:06 PM |
|
in 5.6dhappen twice already after like 15k shares found , all of sudden start getting incorrect shares. had zero previous, in 5.5c never happen but would randomly close 🤷♂️
|
|
|
|
Jinkazuya
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 26, 2021, 08:45:49 PM |
|
I have got a question which is related to weird problem. When for all the people who mine, they will squeeze every bit of their graphic cards to tune up the hashrate. However, I am doing the same thing but it is my first time mining. I changed the fan curve with afterburner for 3080 rtx graphic cards. Without mining, the setting of afterburner is applied to the graphic cards. In other words, it obeys the rules and works as expected. However, whenever mining or mining with phoenix Miner, the fans of the graphic card stopped and even the Vram junction temp temperature or the core temp of the CPU shoots up, the fans are not spinning at all. The 3080 we have is Zotac Trinity OC.
Just wonder how to make the fan work while mining? If anybody could help, really appreciate it.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1694
Merit: 1065
|
|
May 26, 2021, 09:54:15 PM |
|
I have got a question which is related to weird problem. When for all the people who mine, they will squeeze every bit of their graphic cards to tune up the hashrate. However, I am doing the same thing but it is my first time mining. I changed the fan curve with afterburner for 3080 rtx graphic cards. Without mining, the setting of afterburner is applied to the graphic cards. In other words, it obeys the rules and works as expected. However, whenever mining or mining with phoenix Miner, the fans of the graphic card stopped and even the Vram junction temp temperature or the core temp of the CPU shoots up, the fans are not spinning at all. The 3080 we have is Zotac Trinity OC.
Just wonder how to make the fan work while mining? If anybody could help, really appreciate it.
If you are using Windows, then download MSI Afterburner and set the desired fan mode. Download the latest version. I do not use other software from video card manufacturers. If you are using HiveOS or RaveOS, then set the maximum temperature of the video card.
|
|
|
|
Jinkazuya
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 26, 2021, 11:06:38 PM |
|
I have got a question which is related to weird problem. When for all the people who mine, they will squeeze every bit of their graphic cards to tune up the hashrate. However, I am doing the same thing but it is my first time mining. I changed the fan curve with afterburner for 3080 rtx graphic cards. Without mining, the setting of afterburner is applied to the graphic cards. In other words, it obeys the rules and works as expected. However, whenever mining or mining with phoenix Miner, the fans of the graphic card stopped and even the Vram junction temp temperature or the core temp of the CPU shoots up, the fans are not spinning at all. The 3080 we have is Zotac Trinity OC.
Just wonder how to make the fan work while mining? If anybody could help, really appreciate it.
If you are using Windows, then download MSI Afterburner and set the desired fan mode. Download the latest version. I do not use other software from video card manufacturers. If you are using HiveOS or RaveOS, then set the maximum temperature of the video card. Yes I am using window, MSI afterburner is what I am using. But I cannot solve the weird problem and not sure how to set it to fan desired mode. It does not run as I adjusted and the temp keeps going up. I have tried setting up the fan curve and it just gets ignored when mining.
|
|
|
|
BunnyHunter
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 27, 2021, 06:29:17 AM |
|
I have got a question which is related to weird problem. When for all the people who mine, they will squeeze every bit of their graphic cards to tune up the hashrate. However, I am doing the same thing but it is my first time mining. I changed the fan curve with afterburner for 3080 rtx graphic cards. Without mining, the setting of afterburner is applied to the graphic cards. In other words, it obeys the rules and works as expected. However, whenever mining or mining with phoenix Miner, the fans of the graphic card stopped and even the Vram junction temp temperature or the core temp of the CPU shoots up, the fans are not spinning at all. The 3080 we have is Zotac Trinity OC.
Just wonder how to make the fan work while mining? If anybody could help, really appreciate it.
If you are using Windows, then download MSI Afterburner and set the desired fan mode. Download the latest version. I do not use other software from video card manufacturers. If you are using HiveOS or RaveOS, then set the maximum temperature of the video card. Yes I am using window, MSI afterburner is what I am using. But I cannot solve the weird problem and not sure how to set it to fan desired mode. It does not run as I adjusted and the temp keeps going up. I have tried setting up the fan curve and it just gets ignored when mining. Have you tried setting fan speed in BIOS as a workaround?
|
|
|
|
|