JBT
|
|
February 28, 2014, 05:03:18 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
|
|
|
|
kabopar
|
|
February 28, 2014, 08:32:18 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
Was the firmware updated to the latest version?
|
|
|
|
JBT
|
|
February 28, 2014, 11:11:03 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
Was the firmware updated to the latest version? yup something/12/2013
|
|
|
|
erk
|
|
February 28, 2014, 10:21:18 PM |
|
So what happened to these 16 chip Avalon boards that were supposed to be ready end of Feb?
Anyone heard a word from Barntech on any topic lately?
He has kind of abandoned the community both here and on the drillbit forums for most of the year.
|
|
|
|
forevernoob
|
|
February 28, 2014, 11:59:35 PM |
|
Correct me if I'm wrong but there is no way the Avalon boards are gonna ROI unless they are like 50 bucks a piece. It's just outdated technology and the difficulty keeps going up.
|
|
|
|
kabopar
|
|
March 01, 2014, 12:07:59 AM |
|
So what happened to these 16 chip Avalon boards that were supposed to be ready end of Feb?
Anyone heard a word from Barntech on any topic lately?
He has kind of abandoned the community both here and on the drillbit forums for most of the year.
Barntech's post from 26Feb at http://drillbitsystem.com/forum/index.php?topic=285.15 mentions a 3 week delay.
|
|
|
|
kabopar
|
|
March 01, 2014, 12:13:08 AM |
|
Correct me if I'm wrong but there is no way the Avalon boards are gonna ROI unless they are like 50 bucks a piece. It's just outdated technology and the difficulty keeps going up.
They might break even at about USD130 (if you have free electricity).
|
|
|
|
kabopar
|
|
March 01, 2014, 12:17:46 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
Was the firmware updated to the latest version? yup something/12/2013 There were 2 firmware updates in 12/2013, the first one on 11/12/2013 and a later one on 17/12/2013. You may want to reflash the latest one (I know, it's probably a pain, as you need to do it on a PC with the serial comms driver (like the one used for BFGminer), not the USB driver used by cgminer). Cheers
|
|
|
|
JBT
|
|
March 01, 2014, 06:36:04 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
Was the firmware updated to the latest version? yup something/12/2013 There were 2 firmware updates in 12/2013, the first one on 11/12/2013 and a later one on 17/12/2013. You may want to reflash the latest one (I know, it's probably a pain, as you need to do it on a PC with the serial comms driver (like the one used for BFGminer), not the USB driver used by cgminer). Cheers yup done eight_firmware_20131217 already. powered down unplug usb, power on usb plugged in.... even went as far as to reload windows drivers, other pc same results. been hashing on 53:2:850 now for 29hours or so (19 -20 Gh/s) tried 53:2:950 but still getting asci timeouts
|
|
|
|
kabopar
|
|
March 01, 2014, 08:08:41 AM |
|
same thing again, well not exactly. total timeout on 53:2:950 or 53:2:850 but works 53:2:850 HW0.83% av 18,9Gh/s . the voltage and the oscillator not resetting?
Was the firmware updated to the latest version? yup something/12/2013 There were 2 firmware updates in 12/2013, the first one on 11/12/2013 and a later one on 17/12/2013. You may want to reflash the latest one (I know, it's probably a pain, as you need to do it on a PC with the serial comms driver (like the one used for BFGminer), not the USB driver used by cgminer). Cheers yup done eight_firmware_20131217 already. powered down unplug usb, power on usb plugged in.... even went as far as to reload windows drivers, other pc same results. been hashing on 53:2:850 now for 29hours or so (19 -20 Gh/s) tried 53:2:950 but still getting asci timeouts Something is probably better than nothing. What mining software are you using? (I stayed with cgminer 3.10.0 for the drillbit8, as my results with bfgminer were not as good). Cheers
|
|
|
|
JBT
|
|
March 01, 2014, 11:16:38 AM |
|
Something is probably better than nothing. What mining software are you using? (I stayed with cgminer 3.10.0 for the drillbit8, as my results with bfgminer were not as good).
Cheers
yeah with cfminer also couldn't get bfgminer to work......
|
|
|
|
JBT
|
|
March 01, 2014, 12:30:00 PM |
|
did a few test and anything with :950 produces asic timeouts 53:2:750 14.4Gh/s 53:2:850 20.25Gh/s HE 1.2% 52:2:850 20.3 HE 1.13% 53:2:750 13.44Gh/s 54:2:850 20.39Gh/s HE3.9% 55:2:850 13.07Gh/s HE35% 50:2:950 asic timeout 49:2:950 asic timeout
|
|
|
|
chriscross
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 01, 2014, 08:17:03 PM |
|
did a few test and anything with :950 produces asic timeouts 53:2:750 14.4Gh/s 53:2:850 20.25Gh/s HE 1.2% 52:2:850 20.3 HE 1.13% 53:2:750 13.44Gh/s 54:2:850 20.39Gh/s HE3.9% 55:2:850 13.07Gh/s HE35% 50:2:950 asic timeout 49:2:950 asic timeout
40:1:850 19.5Gh/s 1.5% 30°C 50:2:950 19.5Gh/s 1.5% 34°C 52:2:950 asic timeout i also tried your best result 54:2:850 20.0Gh/s 4% 30°C it would seem that my miner is hardwired to work best at 19.5Gh/s
|
|
|
|
kabopar
|
|
March 02, 2014, 04:27:46 AM |
|
did a few test and anything with :950 produces asic timeouts 53:2:750 14.4Gh/s 53:2:850 20.25Gh/s HE 1.2% 52:2:850 20.3 HE 1.13% 53:2:750 13.44Gh/s 54:2:850 20.39Gh/s HE3.9% 55:2:850 13.07Gh/s HE35% 50:2:950 asic timeout 49:2:950 asic timeout
40:1:850 19.5Gh/s 1.5% 30°C 50:2:950 19.5Gh/s 1.5% 34°C 52:2:950 asic timeout i also tried your best result 54:2:850 20.0Gh/s 4% 30°C it would seem that my miner is hardwired to work best at 19.5Gh/s At 53:2:950 I rarely get some asic timeout messages that eventually disappear. It runs at about 22.5 GH/sec (reported temp 29-30C). It has been running like this for long periods of time (cgminer 3.10 on Win7/64). Cheers
|
|
|
|
JBT
|
|
March 02, 2014, 10:10:34 AM |
|
did a few test and anything with :950 produces asic timeouts 53:2:750 14.4Gh/s 53:2:850 20.25Gh/s HE 1.2% 52:2:850 20.3 HE 1.13% 53:2:750 13.44Gh/s 54:2:850 20.39Gh/s HE3.9% 55:2:850 13.07Gh/s HE35% 50:2:950 asic timeout 49:2:950 asic timeout
40:1:850 19.5Gh/s 1.5% 30°C 50:2:950 19.5Gh/s 1.5% 34°C 52:2:950 asic timeout i also tried your best result 54:2:850 20.0Gh/s 4% 30°C it would seem that my miner is hardwired to work best at 19.5Gh/s At 53:2:950 I rarely get some asic timeout messages that eventually disappear. It runs at about 22.5 GH/sec (reported temp 29-30C). It has been running like this for long periods of time (cgminer 3.10 on Win7/64). Cheers yeah kabopar i used to run at 53:2:950 24Gh/s HE0.3% 32C ambient 35C , now it refuses to running on anything with :950 now best 53:2:850 19.94Gh/s HE0.88% 24.2C abient27C this one seems the best less Gh but also less HE 54:2:850 20.39Gh/s HE4.4% 25.5C ambient27C
|
|
|
|
chriscross
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 02, 2014, 11:59:29 AM |
|
did a few test and anything with :950 produces asic timeouts 53:2:750 14.4Gh/s 53:2:850 20.25Gh/s HE 1.2% 52:2:850 20.3 HE 1.13% 53:2:750 13.44Gh/s 54:2:850 20.39Gh/s HE3.9% 55:2:850 13.07Gh/s HE35% 50:2:950 asic timeout 49:2:950 asic timeout
40:1:850 19.5Gh/s 1.5% 30°C 50:2:950 19.5Gh/s 1.5% 34°C 52:2:950 asic timeout i also tried your best result 54:2:850 20.0Gh/s 4% 30°C it would seem that my miner is hardwired to work best at 19.5Gh/s At 53:2:950 I rarely get some asic timeout messages that eventually disappear. It runs at about 22.5 GH/sec (reported temp 29-30C). It has been running like this for long periods of time (cgminer 3.10 on Win7/64). Cheers yeah kabopar i used to run at 53:2:950 24Gh/s HE0.3% 32C ambient 35C , now it refuses to running on anything with :950 now best 53:2:850 19.94Gh/s HE0.88% 24.2C abient27C this one seems the best less Gh but also less HE 54:2:850 20.39Gh/s HE4.4% 25.5C ambient27C Switched from cgminer3.9 to 3.10 and managed to overclock to 52:2:950 with much less hardware errors and no asic timeouts. Now it averages at 21.5gh/s. Temp is about 36°C. At 53:2:950 the hardware errors are way over 20%...
|
|
|
|
JBT
|
|
March 02, 2014, 01:08:47 PM Last edit: March 02, 2014, 02:57:12 PM by JBT |
|
Switched from cgminer3.9 to 3.10 and managed to overclock to 52:2:950 with much less hardware errors and no asic timeouts. Now it averages at 21.5gh/s. Temp is about 36°C. At 53:2:950 the hardware errors are way over 20%...
i see there is also cgm4.0 now in http://ck.kolivas.org/apps/cgminer/
|
|
|
|
JBT
|
|
March 02, 2014, 03:04:10 PM |
|
does anyone know the spec on the voltage regulator on the repaired boards?
|
|
|
|
|
JBT
|
|
March 02, 2014, 03:15:00 PM Last edit: March 02, 2014, 04:12:44 PM by JBT |
|
ty will do ed. want to check if the voltage regulator working properly due to this strike on :950
|
|
|
|
|