[ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22)

[ninjam]

It could be that miner is now better optimized for 1080, I'm getting 18-19 and before was no more than 16 and I'm not complaining

[1653676261]

1653676261

[1653676261]

1653676261

[mk111]

Please advise me whether this is a pool problem or a problem in setting up my miner. It is very strange that the pool began to fall often.

Also please advise me what can be corrected in the settings of my miner,because sometimes it hangs and stops working. Since it can work 10 hours without failures, and then after restart it can stop working in an hour or two (randomly).

It seems that this was a pool problem - almost all pools were down today for some time since the complete mining ecosystem of the coin was under attack.

As for the random crashes no solution yet, but always try to make it more stable. Already working on new ideas for that.

@ All that send me their mnx address because of the bug / new miner bounty campaign:
The payments just left my wallet!  
It remained approx 11 mnx unclaimed, that will reach the faucet soon.

You can see the transactions done on this address:
https://minexexplorer.com/?r=explorer/address&hash=XJ47v5a4Axv192U8Q9CjkidvwHh9CQZz3u
Here you see one outgoing transaction splitting the value in two parts, one smaller (to one of you) and one larger (as self transaction from the wallet software).
clicking on the larger one you can see the next outgoing transaction and so on. Overall there should be 30 transactions in this chain right now. The 31st will be the one to faucet

Thanks you all very much for your support!  

Thank you I received my payment

[maksgorlanov]

Anybody have same problems? Every 10-15 mins lolminer 0.31 losing connect to eu.minexpool.nl and trying to reconnect (need for this around 2-3 mins)
This problem of pool or lolminer? Problem start after anonce of 0.31

[ninjam]

Pool problem, it's under attacks.

[mk111]

V0.3 is really running good and stable with my 1070's.
Lolliedieb - How about optimizing AMD cards, especially Vega cards?

[surkoff]

After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...

[jezined]

After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...

are you overclocking?  the 1070 I received today to try out does the same when I push the graphics clock up to +200

otherwise with graphics +150 and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)

[surkoff]

After working 30s goes to 0 Sol/s and than crashes. 3x1070 + 3x1080 works in stock...

are you overclocking?  the 1070 I received today to try out does the same when I push the graphics clock up to +200

otherwise with graphics +150 and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)

no overclocking. just stock and still got this problem

[Mapuo]

and memory +2000 I am getting about 19KSol/s with the 1070 at maximum power (drawing 145W @ 40C currently but in a very cold garage with fan 75%)

Lol, it's world record. 

[ysakay]

Hi guys.

I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't.  Thank you very much.

[VicentMesdines]

Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you

[Anon11073]

Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.

It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.

[jezined]

Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.

It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.

v0.31 and others before it work great and stable for me, however I am running Ubuntu Linux and I would guess you are using Windows.

The code is developed and compiled on Linux so it will always perform better on that operating system, so if stability is so important to you I suggest you upgrade your OS

[jezined]

Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you

what is the output from the "--list-devices" command or have you not tried this yet?

[jezined]

Hi guys.

I have 12 x RX580. I tried to mine minex. I got 9k hashrate per GPU. I think it's poor hashrate. Could you please share me your bat file? I don't know how i can edit my bat file.I read example config but didn't.  Thank you very much.

do you not know how to use notepad?

and have you read the readme?

 

[VicentMesdines]

Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you

what is the output from the "--list-devices" command or have you not tried this yet?

Hi, I have not tried it. I do not know how it works.

[The Godfather]

Hi.
I have a miner with 1 Rx580 AMD and 3 NVIDIA. The v0.31 only detects NVDIX cards and does not detect AMD.
Other programs detect the 4 graphic cards correctly.
Is there any way to solve this problem?
Thank you

what is the output from the "--list-devices" command or have you not tried this yet?

Hi, I have not tried it. I do not know how it works.

i have same "problem", but I'm lucky because i dont want to use rx 580... So same rig with amd and nvidia, and it only detects nvidia..
--list-devices do not work. It keeps runing command prompt again and again, over and over (shut down then start, shut down then start). but miner works fine, when start mining and only detecting nvidia..

[ALFA-Dnepr]

so take it and try it.
And learn how to read readme and help

[Anon11073]

Hello, Lolliedieb.
I currently use lolMiner v.0.31, but I am plagued by the unexplained crash again.
It crashes randomly in hours to tens of hours.

It's a wonderful performance, but I am in trouble if stability is low.
I hope to be improved soon.

v0.31 and others before it work great and stable for me, however I am running Ubuntu Linux and I would guess you are using Windows.

The code is developed and compiled on Linux so it will always perform better on that operating system, so if stability is so important to you I suggest you upgrade your OS

Yes, I am using Windows.
I am going to use Linux, but is Ubuntu installed on USB OK?

P.S. I hope the stability of Windows improves...

[Lolliedieb]

i have same "problem", but I'm lucky because i dont want to use rx 580... So same rig with amd and nvidia, and it only detects nvidia..
--list-devices do not work. It keeps runing command prompt again and again, over and over (shut down then start, shut down then start). but miner works fine, when start mining and only detecting nvidia..

A quick cite from the lolMiner_readme.pdf:

--platform <number>, --device <device numbers>, --list-devices
OpenCL is organized in platforms, that correspond to the driver to be used for the Miner. On many system –
in particular when the CPU features an integrated graphic card – there is more then one platform on the
system available.

The parameter platform can be used to select the right platform. lolMiner offers the option --list-devices.
When lolMiner is started with this parameter it will print out a list with all platforms that were found on the
system. Additionally for every platform all devices are printed that are found within a platform.
After printing out the miner will close directly. To see the output in Windows you must run cmd (the
Windows command line), navigate to the directory where lolMiner-mnx.exe is in and then run lolMiner-
mnx.exe --list-devices directly from the command line. Writing the --list-devices to the configuration file is
not supported and running in the batch will end up in the miner closing instantaneously and you do not see a
print out.

From lolMiner-mnx 0.3 there is one special value AUTO that can be passed to the miner and also is the
default. This one will select the platform with the most graphic cards automatically. If there are two with the
same number, e.g. and Intel integrated GPU and one AMD / Nvidia graphic card it will prefer the non-Intel
platform.

So ... is not so hard is it? when you do not pass anything it seems the AUTO option gets the Nvidia platform... so you have to search and select the AMD by hand.

P.S. I hope the stability of Windows improves...

I hope so, too ^^ Waiting for new Ubuntu to come out - then I can set up new Windows build chain with updates runtime libraries - hope that this helps improving stability.