Official Thread: AMT

[Biomech]

Advanced Mining Technologies is the official name.  Says so in DNS and Delaware registration.

It is likey their mistake on the website.   But given how sloppy they've been,  I would not be surprised!

Ok, where's their PA registration? Anyone doing business in PA is required to register their business as such. It doesn't matter where they are incorporated. Are they doing business in PA illegally?

Oh, please.

This is Pennsylvania we're talking about. What the law says is irrelevant there, and if you've ever lived there you know it. It's more productive to duck the inspector until they come by for their bribe, if they ever do. When they do, you slip them a c-note for their crack, and they go away for a while. There is no more corrupt, but short sighted, bunch of yahoos on the planet than the Harrisburg Cocaine Users Association Commonwealth Legislature.

We are talking about a place where you can buy a cop for less than $50, but to legally comply with practically anything requires leaving the state. Legit business doesn't register or comply with a lot of regulations, because to do so would mean that there is no business in PA. Look at the history of the steel industry there, as just one example.

That being said, a Delaware corporation would only need to file ownership papers or rental agreements by law anyway. Not stuff that's easily found, unless you're on the ground.

In accordance with your logic every business in Pennsylvania can now engage in illicit activities as much they wish. So when they are caught red handed they just have to brag about how the commonwealth legislature is corrupted and how that caused them to engage in fraudulent activities.

My experience was that most were legit despite the legislative atmosphere, but they did NOT comply with the hydra headed, deliberately designed to drive commerce out of the commonwealth legislation. To remain in business, they paid the demanded bribes. Not all that quietly, either. Who was paying and who was on the take was common knowledge. When the revolution comes, PA's legislators will be the first against the wall. One of many reasons I no longer live in that benighted state.

[Nyboe]

Hello all,

This is my first post.  My order number is 1051 for two AMT 1200 - 1.2Th/s Coin Miners.  I purchased them on 12/13/2013.  I just spoke with Adv. Miners directly.  They expect the machines to be available next week.   I am looking to sell at my cost, $11,998.

They are willing to swap out my machines with anyone who is willing to purchase them from me.  They will handle the transaction.

Let me know if you are interested.

Thanks,
Josh

[augustocroppo]

My experience was that most were legit despite the legislative atmosphere, but they did NOT comply with the hydra headed, deliberately designed to drive commerce out of the commonwealth legislation. To remain in business, they paid the demanded bribes. Not all that quietly, either. Who was paying and who was on the take was common knowledge. When the revolution comes, PA's legislators will be the first against the wall. One of many reasons I no longer live in that benighted state.

"When the revolution comes"?

LoL

Facts remains, with revolution or not, AMT is not presenting themselves as the legit entity which they claim to be.

[l12]

hi all
just want to chip in on the info about amt
i personally went down to their office back in jan 13 building e1 took me awhile to find the place since i was not familiar with the area
but regardless i was there in person and had a talk with josh , at the time he was putting together a custom unit for someone out in cali .
so just want to throw it out there  i was at the location talking to him for roughly around 2 hr bout the company and other stuff but at the end of it all i did
put an order in for a few 1.2 units on the site it said it'll take 6 weeks for the order but just track it still said processing but still have 2 more week but josh told me that it might be
earlier since they pretty much got their process up to speed so hopefully i get a call from them that the order is ready to be picked up
i will call them sometime next week to check on the order with someone and see hows it goin....will keep you guys posted

[dreward]

Ok so how about some realism

1) They have shipped machines and they do work (see Biomechs excellent review if you don't believe me)
2) They received the coincraft chips they need for production at the end of Jan
3) They have told customers many times that they are using an outside company to do the surface mount
4) 2-3 weeks is a realistic time frame to have the boards made and machines built (esp if the machines are ready for the boards)
5) Why anyone would doubt $150K of chips over $5K of cases is beyond me

AMT do exist
They have shipped product
They are coincraft's US distributor
They have chips

No they are not crooks they are geeks who did not fully recognize what they were getting into. They seem to be doing what they can to deliver a good product quickly. I look forward to receiving mine RSN (order #656 for those keeping count).

[YourPalToots]

It would help prove they have the hardware on hand (like they said) and in combination with having the chips, will help put pre-orders at ease.

Help put pre-orders at ease? How many unit have you pre-ordered?

[Syke]

Hello all,

This is my first post.  My order number is 1051 for two AMT 1200 - 1.2Th/s Coin Miners.  I purchased them on 12/13/2013.  I just spoke with Adv. Miners directly.  They expect the machines to be available next week.   I am looking to sell at my cost, $11,998.

Best of luck with that. $12,000 will get you 2.4 TH/s from other manufacturers.

[athgaurd]

hi all
just want to chip in on the info about amt
i personally went down to their office back in jan 13 building e1 took me awhile to find the place since i was not familiar with the area
but regardless i was there in person and had a talk with josh , at the time he was putting together a custom unit for someone out in cali .
so just want to throw it out there  i was at the location talking to him for roughly around 2 hr bout the company and other stuff but at the end of it all i did
put an order in for a few 1.2 units on the site it said it'll take 6 weeks for the order but just track it still said processing but still have 2 more week but josh told me that it might be
earlier since they pretty much got their process up to speed so hopefully i get a call from them that the order is ready to be picked up
i will call them sometime next week to check on the order with someone and see hows it goin....will keep you guys posted

Finally! Someone who has actually claimed to have been at AMT recently and not some groupy that says "see photos? It must be real because there is a photo". Why is it so hard to find? I had someone go check out the place and they said they found the place but didn't find AMT.

[athgaurd]

Hello all,

This is my first post.  My order number is 1051 for two AMT 1200 - 1.2Th/s Coin Miners.  I purchased them on 12/13/2013.  I just spoke with Adv. Miners directly.  They expect the machines to be available next week.   I am looking to sell at my cost, $11,998.

Best of luck with that. $12,000 will get you 2.4 TH/s from other manufacturers.

That is 2.4 TH/s for $12,000... well minus $2.

[DyslexicZombei]

Hmm, I want to know why our co-op put in over $20K worth of Bitmine orders in Oct./Nov. well before AMT was their official reseller...

...and we still haven't gotten our Bitmine rigs or updates except for a Jan. 30th update...promising January delivery.  

[FrictionlessCoin]

Hello all,

This is my first post.  My order number is 1051 for two AMT 1200 - 1.2Th/s Coin Miners.  I purchased them on 12/13/2013.  I just spoke with Adv. Miners directly.  They expect the machines to be available next week.   I am looking to sell at my cost, $11,998.

Best of luck with that. $12,000 will get you 2.4 TH/s from other manufacturers.

Best of lucky finding a manufacturer that can ship you 2.4 Th/s by April.

[FrictionlessCoin]

hi all
just want to chip in on the info about amt
i personally went down to their office back in jan 13 building e1 took me awhile to find the place since i was not familiar with the area
but regardless i was there in person and had a talk with josh , at the time he was putting together a custom unit for someone out in cali .
so just want to throw it out there  i was at the location talking to him for roughly around 2 hr bout the company and other stuff but at the end of it all i did
put an order in for a few 1.2 units on the site it said it'll take 6 weeks for the order but just track it still said processing but still have 2 more week but josh told me that it might be
earlier since they pretty much got their process up to speed so hopefully i get a call from them that the order is ready to be picked up
i will call them sometime next week to check on the order with someone and see hows it goin....will keep you guys posted

Finally! Someone who has actually claimed to have been at AMT recently and not some groupy that says "see photos? It must be real because there is a photo". Why is it so hard to find? I had someone go check out the place and they said they found the place but didn't find AMT.

You are an idiot for trusting your guy.  Besides... are you even a customer of AMT?

[Syke]

Best of lucky finding a manufacturer that can ship you 2.4 Th/s by April.

Bitmain units are all in-stock. Order from them now you'll have it next week.

[FrictionlessCoin]

Hmm, I want to know why our co-op put in over $20K worth of Bitmine orders in Oct./Nov. well before AMT was their official reseller...

...and we still haven't gotten our Bitmine rigs or updates. 

That's what I keep telling these trolls,  if Bitmine the main manufacturer is delayed, then obviously AMT will be delayed.

The only thing going for AMT is that it is U.S. based and can ship units faster to U.S. customers than Bitmine can.

[Cheshyr]

I'm going to have to agree with Biomech here; PA is a legislative hell designed to exploit.  AMT is a business making miners here, likely much to their dismay.  I know I'm leaving as soon as I wrap up a few months of loose ends.

[FrictionlessCoin]

Let's do some math to see how much AMT makes per unit.

Case, power supply and logic board - $500.

40 coincraft a1 chips at $90 a piece ... $3,600.

Total $4,100 .... list price... $6,000 not bad...  $1,900 profit per system.

Nice lucrative business!

[athgaurd]

hi all
just want to chip in on the info about amt
i personally went down to their office back in jan 13 building e1 took me awhile to find the place since i was not familiar with the area
but regardless i was there in person and had a talk with josh , at the time he was putting together a custom unit for someone out in cali .
so just want to throw it out there  i was at the location talking to him for roughly around 2 hr bout the company and other stuff but at the end of it all i did
put an order in for a few 1.2 units on the site it said it'll take 6 weeks for the order but just track it still said processing but still have 2 more week but josh told me that it might be
earlier since they pretty much got their process up to speed so hopefully i get a call from them that the order is ready to be picked up
i will call them sometime next week to check on the order with someone and see hows it goin....will keep you guys posted

Finally! Someone who has actually claimed to have been at AMT recently and not some groupy that says "see photos? It must be real because there is a photo". Why is it so hard to find? I had someone go check out the place and they said they found the place but didn't find AMT.

You are an idiot for trusting your guy.  Besides... are you even a customer of AMT?

I really don't know how to respond to that one without dropping down a few points on the IQ scale... however I will say to your question, yes, and based on you are trying to get a 5% discount and trying to sell your miner for above retail prices when the market is about to get flooded with miners lets your actions speak for themselves. I wish you the best of luck on that. I, however, am in this for the long haul, being that I have worked with bitcoin for a few years now and it hasn't failed me yet, even with the ups and downs.

[sirminesalot]

Let's do some math to see how much AMT makes per unit.

Case, power supply and logic board - $500.

40 coincraft a1 chips at $90 a piece ... $3,600.

Total $4,100 .... list price... $6,000 not bad...  $1,900 profit per system.

Nice lucrative business!

More like:

Cost of Materials - $4,100
Cash collected per miner- $6000
Making 100% profit from not delivering miners - PRICELESS

[FrictionlessCoin]

hi all
just want to chip in on the info about amt
i personally went down to their office back in jan 13 building e1 took me awhile to find the place since i was not familiar with the area
but regardless i was there in person and had a talk with josh , at the time he was putting together a custom unit for someone out in cali .
so just want to throw it out there  i was at the location talking to him for roughly around 2 hr bout the company and other stuff but at the end of it all i did
put an order in for a few 1.2 units on the site it said it'll take 6 weeks for the order but just track it still said processing but still have 2 more week but josh told me that it might be
earlier since they pretty much got their process up to speed so hopefully i get a call from them that the order is ready to be picked up
i will call them sometime next week to check on the order with someone and see hows it goin....will keep you guys posted

Finally! Someone who has actually claimed to have been at AMT recently and not some groupy that says "see photos? It must be real because there is a photo". Why is it so hard to find? I had someone go check out the place and they said they found the place but didn't find AMT.

You are an idiot for trusting your guy.  Besides... are you even a customer of AMT?

I really don't know how to respond to that one without dropping down a few points on the IQ scale... however I will say to your question, yes, and based on you are trying to get a 5% discount and trying to sell your miner for above retail prices when the market is about to get flooded with miners lets your actions speak for themselves. I wish you the best of luck on that. I, however, am in this for the long haul, being that I have worked with bitcoin for a few years now and it hasn't failed me yet, even with the ups and downs.

Yeah right... posting from a newbie account.

Why do you even bother trolling here if you aren't even a customer?

[MrTeal]

Hello all,

This is my first post.  My order number is 1051 for two AMT 1200 - 1.2Th/s Coin Miners.  I purchased them on 12/13/2013.  I just spoke with Adv. Miners directly.  They expect the machines to be available next week.   I am looking to sell at my cost, $11,998.

Best of luck with that. $12,000 will get you 2.4 TH/s from other manufacturers.

Best of lucky finding a manufacturer that can ship you 2.4 Th/s by April.

At the current price of BTC (US$674), an Antminer S1 will set up back $981.34 and will do 200GH/s poolside at 2J/GH. You'll need to buy your own power supply, so don't forget to budget in ~$50 for that. They're also in stock and will arrive less than a week after you order.

So really, you're looking at having to spend $12250-$12500 in order to be able to be hashing at 2.4TH/s possibly by the end of this week, maybe the start of next week. Those AMT ones are still going to be a few hundred dollars cheaper.