Mitron
Newbie
Offline
Activity: 58
Merit: 0
|
|
December 23, 2013, 05:27:46 PM |
|
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ? Thanks!
Sure, check the Group Buys. BitCanary has the Blades and two or three people are selling the Cubes there.
|
|
|
|
capitalaccent
Full Member
Offline
Activity: 134
Merit: 100
Bitleu Team
|
|
December 23, 2013, 05:56:05 PM |
|
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ? Thanks!
Sure, check the Group Buys. BitCanary has the Blades and two or three people are selling the Cubes there. Thanks!
|
|
|
|
mahoni
Member
Offline
Activity: 71
Merit: 10
|
|
December 24, 2013, 12:06:57 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please
|
|
|
|
bitciondad
Member
Offline
Activity: 61
Merit: 10
|
|
December 24, 2013, 03:23:17 PM |
|
same issue , windows 7 , no drivers
|
|
|
|
bitciondad
Member
Offline
Activity: 61
Merit: 10
|
|
December 24, 2013, 04:56:31 PM |
|
I installed with zadig , device as recognised as bifury , but none of the miners can see them
just says looking for devices .
help
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
December 24, 2013, 10:14:57 PM |
|
Zadig is for use with CGminer.....FTDI USB is for BFGminer In both cases you need the devices connected & powered up,install the USB driver(either Zadig for CGminer or FTDI for BFGminer),then reboot the PC.It should work if CG or BFGminer has included the settings,otherwise you may need to "compile" the miner I have had no luck in compiling miners in Win7 or Unbuntu I just use a bat file to set pool info & it works...for my BFL 30GH'er & Klondike's Hope that helps,I don't have any of these miners,so its all I can offer
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
tanil
|
|
December 25, 2013, 08:13:14 AM |
|
who wants to sell me used?
|
|
|
|
bitciondad
Member
Offline
Activity: 61
Merit: 10
|
|
December 25, 2013, 11:29:26 PM |
|
you can have mine . . . waste of money . no support
|
|
|
|
tokona
|
|
December 26, 2013, 12:39:19 AM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...
|
|
|
|
tokona
|
|
December 26, 2013, 12:47:08 AM |
|
I installed with zadig , device as recognised as bifury , but none of the miners can see them
just says looking for devices .
help
same problem for me!
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
December 26, 2013, 03:54:18 AM |
|
First of all, our main product is on a Christmas sale! - Yes, the price has dropped significantly.
If I buy 10 BiFury devices at $2999, I'll have ~50GH/s. If I buy 10 ASICMiner Blades at $2499, I'll have ~100GH/s. If I buy 6 ASICMiner Cubes at $2808, I'll have ~180GH/s. $200 -$500 cheaper and two to three times the speed. I just don't see any advantage in buying these compared to other devices currently available. Am I missing something? No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ? Thanks! Bitmain Antminer: easily overclocked to 200GH, 3.15BTC now
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
December 26, 2013, 04:04:25 AM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
tokona
|
|
December 26, 2013, 11:01:37 AM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury?
|
|
|
|
tokona
|
|
December 26, 2013, 11:44:13 AM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good.
|
|
|
|
tokona
|
|
December 26, 2013, 12:08:15 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good. Now green light is on, but this? and then red light was on again...
|
|
|
|
jedimstr
|
|
December 26, 2013, 12:59:54 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good. Now green light is on, but this? and then red light was on again... The driver and CGMiner seem to fine now for you... The problem is overheating. Do you have a fan on your Bi*Fury? You should never run these without one. At 123.7C you're essentially frying your unit.
|
|
|
|
tokona
|
|
December 26, 2013, 01:01:43 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good. Now green light is on, but this? and then red light was on again... The driver and CGMiner seem to fine now for you... The problem is overheating. Do you have a fan on your Bi*Fury? You should never run these without one. Yapp i need a fan, but its so hot can a fan fix that to normal temp...
|
|
|
|
jedimstr
|
|
December 26, 2013, 01:04:54 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good. Now green light is on, but this? and then red light was on again... The driver and CGMiner seem to fine now for you... The problem is overheating. Do you have a fan on your Bi*Fury? You should never run these without one. Yapp i need a fan, but its so hot can a fan fix that to normal temp... Depends on your ambient temp... But I've just got a USB fan on mine and a few other sticks like the RedFury and my Bi*Fury never goes above 50C. You need to move some air through the big Heatsink to get it working. It's a pretty big Heatsink afterall. Don't keep running it without some active cooling or you'll destroy your bi*Fury.
|
|
|
|
tokona
|
|
December 26, 2013, 01:15:08 PM |
|
Hi There, so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there. Is an USB 3.0 hub necassary to use this Blocks? Can anybody help please Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do... Here's the FTDI drivers for BFGminer: http://www.ftdichip.com/FTDrivers.htmPick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work So you say that i should only install the drivers on windows and nothing on the fury? Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good. Now green light is on, but this? and then red light was on again... The driver and CGMiner seem to fine now for you... The problem is overheating. Do you have a fan on your Bi*Fury? You should never run these without one. Yapp i need a fan, but its so hot can a fan fix that to normal temp... Depends on your ambient temp... But I've just got a USB fan on mine and a few other sticks like the RedFury and my Bi*Fury never goes above 50C. You need to move some air through the big Heatsink to get it working. It's a pretty big Heatsink afterall. Don't keep running it without some active cooling or you'll destroy your bi*Fury. Ok thanks! i hope the bi*Fury is alright. i order a usb fan right now. i did not know it would be this warm without doing mining.
|
|
|
|
cscape
|
|
December 26, 2013, 01:47:20 PM |
|
Ok thanks! i hope the bi*Fury is alright. i order a usb fan right now. i did not know it would be this warm without doing mining.
The latest firmware is smarter, and will only power up the chips when it has received some recent data from the miner software. It will also power down the chips again when the miner software stops, or when the board gets too hot. You can get firmware upgrades here: http://c-scape.nl/bi-fury/
|
Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
|
|
|
|