[ANN] TagCoin - Multi Token Wallet and Trading Platform

[vesperwillow]

So still no info on solo mining? All i want to do is point a bunch of my mining farm to a single system, and mine the coin lol.

[1714158473]

1714158473

[Prelude]

So still no info on solo mining? All i want to do is point a bunch of my mining farm to a single system, and mine the coin lol.

Same as any other coin. Hope you've got some power if you're going solo.

[vesperwillow]

So still no info on solo mining? All i want to do is point a bunch of my mining farm to a single system, and mine the coin lol.

Same as any other coin. Hope you've got some power if you're going solo.

I've tried it the same as other coins.. doesn't seem to like me much. Historically I've used the demon executables, but this coin only provides the qt gui executable. I made a config file and fired it up with the server param, but can't get any systems to connect. I can telnet so the rpcport is open, but the systems can't connect otherwise.

[paladin281978]

1 TAG = 10-15$
But better 25$

[tagbond]

It's either $1, $10 or better still a nice round $100...just easier to work out what you have when it is decimals..

[ny2cafuse]

So still no info on solo mining? All i want to do is point a bunch of my mining farm to a single system, and mine the coin lol.

Same as any other coin. Hope you've got some power if you're going solo.

I've tried it the same as other coins.. doesn't seem to like me much. Historically I've used the demon executables, but this coin only provides the qt gui executable. I made a config file and fired it up with the server param, but can't get any systems to connect. I can telnet so the rpcport is open, but the systems can't connect otherwise.

Vesper- make sure your tagcoin.conf file is configured correctly.  If you want, post it here to verify that it is set up correctly.  If it is, you just need to make sure your client is up to date, and you should be able to solo-mine.

[vesperwillow]

So still no info on solo mining? All i want to do is point a bunch of my mining farm to a single system, and mine the coin lol.

Same as any other coin. Hope you've got some power if you're going solo.

I've tried it the same as other coins.. doesn't seem to like me much. Historically I've used the demon executables, but this coin only provides the qt gui executable. I made a config file and fired it up with the server param, but can't get any systems to connect. I can telnet so the rpcport is open, but the systems can't connect otherwise.

Vesper- make sure your tagcoin.conf file is configured correctly.  If you want, post it here to verify that it is set up correctly.  If it is, you just need to make sure your client is up to date, and you should be able to solo-mine.

As per previous posts on the topic:

listen=1
daemon=1
server=1
rpcuser=myuser
rpcpassword=mypass
rpcallowip=*
rpcport=10500
port=8623

i fire up QT with -server, and the GUI loads. Port 10500 can be telnetted into and it's looking for json/rpc connect stuff. cgminer can't connect to it though.

Cgminer stuff, I'm using BAMT, so like my other solo mining stuff I have it defined as a pool connection:

"url":"ip:10500",
"user":"myuser",
"pass":"mypass"

The rest is pretty much automated.

Update - Just realized I had a typo in my password! DOH! Haha.. wow, it's always something simple.

Next question: When I solo with BTC daemon, I have to specify a payout address. For TAG, since it's using the qt gui, will it simply know to use the address I have defined in TAG?

[Francisco]

Post your cgminer command line as well.

[ny2cafuse]

i fire up QT with -server, and the GUI loads. Port 10500 can be telnetted into and it's looking for json/rpc connect stuff. cgminer can't connect to it though.

Although it's not the problem, if you set the .conf file with server=1, you don't need to add the -server switch when starting tagcoin-qt.

Also, set rpcallowip=127.0.0.1.  I'm not sure if it works with outside IPs, but it always works for me with 127.0.0.1.  Of course, if you have a mining farm, you'll be setting multiple IPs.

[vesperwillow]

Stupid typo.. it was a mistyped password.

Next 2 questions:

1. For payout, do I need to specify an address in the config file, or will TAG use the one in the QT/GUI file?

2. Is it possible for me to point multiple machines at the single instance of TAG-QT for mining?

i fire up QT with -server, and the GUI loads. Port 10500 can be telnetted into and it's looking for json/rpc connect stuff. cgminer can't connect to it though.

Although it's not the problem, if you set the .conf file with server=1, you don't need to add the -server switch when starting tagcoin-qt.

Also, set rpcallowip=127.0.0.1.  I'm not sure if it works with outside IPs, but it always works for me with 127.0.0.1.  Of course, if you have a mining farm, you'll be setting multiple IPs.

Yeah the server flag is redundant, I kept it there just for posterity.

[ny2cafuse]

Next question: When I solo with BTC daemon, I have to specify a payout address. For TAG, since it's using the qt gui, will it simply know to use the address I have defined in TAG?

Any blocks found and confirmed will be credited to the tagcoin-qt address.

[techbytes]

Stupid typo.. it was a mistyped password.

Next 2 questions:

1. For payout, do I need to specify an address in the config file, or will TAG use the one in the QT/GUI file?

2. Is it possible for me to point multiple machines at the single instance of TAG-QT for mining?

i fire up QT with -server, and the GUI loads. Port 10500 can be telnetted into and it's looking for json/rpc connect stuff. cgminer can't connect to it though.

Although it's not the problem, if you set the .conf file with server=1, you don't need to add the -server switch when starting tagcoin-qt.

Also, set rpcallowip=127.0.0.1.  I'm not sure if it works with outside IPs, but it always works for me with 127.0.0.1.  Of course, if you have a mining farm, you'll be setting multiple IPs.

Yeah the server flag is redundant, I kept it there just for posterity.

2.  Yes and works with external IPs as well.  Just need to add them to the rpcallowip. 

I had 8MH solo for 14 hours and then gave up after no block found.  Good luck.


-tb-

[vesperwillow]

Next question: When I solo with BTC daemon, I have to specify a payout address. For TAG, since it's using the qt gui, will it simply know to use the address I have defined in TAG?

Any blocks found and confirmed will be credited to the tagcoin-qt address.

That's what I was thinking. Just wanted extra reassurance, thanks.

2.  Yes and works with external IPs as well.  Just need to add them to the rpcallowip. 

I had 8MH solo for 14 hours and then gave up after no block found.  Good luck.


-tb-

Awesome.. thanks. Best of luck to you. Figured I'd give it a shot. I've got more power than that, but with only 4-6 I've been finding blocks on my own via pools. Figured it was worth a shot to see what happens.

I'll post my results after 6 hours.

[Don007]

Goodluck guys! I hope you are Lucky.
I don't really have the hashpower to solo mine, but Torzsy's pool (http://tag.cryptominer.net/index.php?page=home) is working fine for me. About 180 MH/z now and an average time per round of +/- 25 minutes . 

[ny2cafuse]

I'll go ahead and post this here before I make a [ANN] post.

TAGMining.Com mining pool is now up and running.

I won't blow smoke... it's a pretty standard pool, nothing new... just giving people options.

1% fee.
Standard 200 confirms to payout.
LP & stratum
Server located in San Francisco, CA, USA.

I will personally pay out 10 TAG to the first block finder, 5 TAG to the next 4, and then 2 TAG for the next 5.  These rewards will be paid when the 10th block is confirmed, so if you found multiple blocks I can pay you in one transaction.  I will be looking at how feasible it is to reward the block finder with a little extra TAG.  mmcFE offers it now in the configs, so I might just implement it in the future.

I started a litecoin pool a while back, but never really gained any following.  I figured I'd test this out again and see where it goes.

I'm open to all community suggestions if the pool is successful.

Let me know how it goes.  If there are any issues, please let me know via PM so I can correct them ASAP.

[Eli0t]

this is an obvious one, but ill point it out anyway the date column says "NaN undefined NaN" in Spent and Received on the coin wallets, clicking the transaction shows the date

[vesperwillow]

It's been roughly 6 hours. I put 4mh of power to solo mining tag to see how it goes. According to Cgminer I have a bunch of accepts, some rejects. I don't think I found any blocks. In the past, an accept usually meant a found block, but the number of accepts I'm showing would make me rich.

Thoughts?

[techbytes]

Do you have failover set to one of the TAG pool?


-tb-

[vesperwillow]

Failover is set, but it never switched pools.

[ny2cafuse]

Failover is set, but it never switched pools.

They could be orphaned.  If you really did find a block, regardless of whether it was orphaned or not, it will show in the transactions tab.

If you get tired of solo-mining, you could always point that hashing power towards my pool.  We could use a little help