Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin).

[@enemy]

Am i the only one having problem with xevan ?
I tried many pools and each time all my shares are rejected. Others algorithms are working well with latest release but not xevan... I have no problems with ccminer-xevan...

Any ideas ?

You only one. Show your  ***xevan.cmd  file or check pool:port

[1715229944]

1715229944

[1715229944]

1715229944

[1715229944]

1715229944

[1715229944]

1715229944

[Dalba]

Am i the only one having problem with xevan ?
I tried many pools and each time all my shares are rejected. Others algorithms are working well with latest release but not xevan... I have no problems with ccminer-xevan...

Any ideas ?

You only one. Show your  ***xevan.cmd  file or check pool:port

Ok sorry i found my error. A stupid error ! I was sending a bad argument in my command line. Everything is ok now. Just a bad copy paste....

[pawalini]

Hey gues i have problem on 1 of my rig. Some times i getting ERROR: GPU#2: GeForce GTX 1080 Ti >>> unspecified launch failure

Any suggestion ??


POWER 75%
CORE 100+
MAM 0+


Thanks !

[@enemy]

Hey gues i have problem on 1 of my rig. Some times i getting ERROR: GPU#2: GeForce GTX 1080 Ti >>> unspecified launch failure

Any suggestion ??


POWER 75%
CORE 100+
MAM 0+


Thanks !

Try to reduce intensity GPU#2 or reduce OC  ( core +50-70)

Mean intensity in *.cmd like  :  -i 20,20,19,20,20,20   ( Rig 6 GPU)

[grendel25]

I'm really liking enemy miner so far.  I noticed about a 12-15% increase on xevan and compared to krnl-xevan.

EDIT:: And scratch what I said earlier about the power.  enemy miner is probably still more efficient over all power-wise but it does use a little more power.  maybe about 8 watts more per 1080ti

[RigRoss]

I'm able to download and run z-enemy 1.08 to all my rigs except one of them. The message I get is "The code execution cannot proceed because MSVCR120.dll was not found. Reinstalling the program may fix this problem." I've tried downloading and installing from USB and the interwebs and it gives me the same error. Has anyone else dealt with this?

[@enemy]

I'm able to download and run z-enemy 1.08 to all my rigs except one of them. The message I get is "The code execution cannot proceed because MSVCR120.dll was not found. Reinstalling the program may fix this problem." I've tried downloading and installing from USB and the interwebs and it gives me the same error. Has anyone else dealt with this?

FAQ:

I cannot start miner, it says I'm missing msvcr120.dll?
Download and reinstall drivers from http://www.nvidia.com/Download/index.aspx

[vkorzha]

@enemy is there away to build in a sometype of "watchdog" argument into a command line. My x16s and r on z-enemy crashes sometimes due to overclocking, I want to make sure I can specify the miner to auto-restart when problem is encountered and not to wait until I wake in the morning
Can you please help with that?

[madnessteat]

Very good miner. Translated for Russian-speaking users. https://bitcointalk.org/index.php?topic=3761577

[Marvell2]

- Now supporting failover pool! It is now possible to add additional pools incase your main pool loses stratum connection. Here is an example for your .bat file:
z-enemy -a x16r -o stratum+tcp://ravenminer.com:6666 -u RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h -p d=16 -o stratum+tcp://krawww-miner.eu:3636 -u RFQXKVKpHMwyJ86YqQUJSZK1S8m8oRbC5h -p d=3

This i really good.
What's the failover mechanism? like once it's switched to secondary pool, how long does it take to re-connect to the main pool?

thats my issue with failover, it does not seem to ever switch back to the primary pool

[eruman34]

When 19 GPU support?

[dvtunerpt]

Best intensity and OC for a Gigabyte GTX 1070 Windforce?

[Bimmber]

When 19 GPU support?

What is stopping you using -d x,x,x  in 2 or 3 BAT files?

[felio]

I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.

[Marvell2]

I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.

wow this could be huge, 2.5 hr def fee?

[igotfits]

Not tooo sure how much better this miner is over ccminer but im giving you guys a go. 

[1sotope]

Hello guys!
I'm having the following issues with my rig:

[INFO] 18/05/14 09:11:01 NVIDIA CUDA 9.1
[ERROR] 18/05/14 09:11:01 Unable to query number of CUDA devices! Is an nVidia driver installed?

Its an endless loop. In my case it is caused by power off/on(delay between 2 PSU's; GPU PSU turns on with small delay, so my system cannot see GPU's), to solve this i must simply restart the system.
My "monitoring device" will do it automatically IF process or network dies, so in this case i have to do it manually every time (because miner process wont exit with this error).

I need to write an argument that will exit my miner on this error.

will something like "--eexit 1" do the work or should it be something else?

Can you help me with code, so my miner will automatically exit on this error?

Thank you very much in advance!

[felio]

Hello guys!
I'm having the following issues with my rig:

[INFO] 18/05/14 09:11:01 NVIDIA CUDA 9.1
[ERROR] 18/05/14 09:11:01 Unable to query number of CUDA devices! Is an nVidia driver installed?

Its an endless loop. In my case it is caused by power off/on(delay between 2 PSU's; GPU PSU turns on with small delay, so my system cannot see GPU's), to solve this i must simply restart the system.
My "monitoring device" will do it automatically IF process or network dies, so in this case i have to do it manually every time (because miner process wont exit with this error).

I need to write an argument that will exit my miner on this error.

will something like "--eexit 1" do the work or should it be something else?

Can you help me with code, so my miner will automatically exit on this error?

Thank you very much in advance!

Did you try adding a -d 0,1,2,3 for however many GPUs you have?  I had to add that with 109.

[1sotope]

Hello guys!
I'm having the following issues with my rig:

[INFO] 18/05/14 09:11:01 NVIDIA CUDA 9.1
[ERROR] 18/05/14 09:11:01 Unable to query number of CUDA devices! Is an nVidia driver installed?

Its an endless loop. In my case it is caused by power off/on(delay between 2 PSU's; GPU PSU turns on with small delay, so my system cannot see GPU's), to solve this i must simply restart the system.
My "monitoring device" will do it automatically IF process or network dies, so in this case i have to do it manually every time (because miner process wont exit with this error).

I need to write an argument that will exit my miner on this error.

will something like "--eexit 1" do the work or should it be something else?

Can you help me with code, so my miner will automatically exit on this error?

Thank you very much in advance!

Did you try adding a -d 0,1,2,3 for however many GPUs you have?  I had to add that with 109.

Difficulty has nothing to do with it(pool has no strict requirement for its setup), and i have 1x1070, 1x1080, 2x1080ti's and 2380W PSU to power them.

[Vokas123]

-d is not abbreviation for difficulty, it stands for device