Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[skleb]

I am mining in p2p with my 1,35Mh/s since and everything seems ok with payouts but my reject rate is too high..It's hoovering around ~20% sometimes even 25% while I see people with similar hashrate around 2-5%..how they do it? I've tried no + diff adjustment, I have tried +0.001566 by BorisTheSpider guide calculation and I have tried one suggested by the pool..what else I can done ?

What's your latency to the node? You will get the absolute best performance by hosting a local node if you can - you don't have to open it up to anyone else, just run a private one for your own mining.

Do you have the link to set up your own node? I'm hashing about 620 KH/s -- is that enough to be in a P2P pool? I'm getting sporadic payouts and I'm on the node that has the least latency to me, etc.

[hvezdasmrti]

All pools inefficient now 

I have left http://vert.bitcrush.info/ because its a total crap pool and switched to heavy industries. But it started to find blocks 3 years after few hours of mining too like other crap pools....

[deky_]

You can expect around 350-360 kh

What speed can I get from 280x?

[masterkiller]

Vertcoin has been added at Coin-Swap.net

[deky_]

I get 234 KH/s with these settings on Gigabyte 270x OC edition:

timeout /t 60
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -I 19 --thread-concurrency 10244 -o stratum+tcp://xxxxxxxxxxxxxxxxxxxxxxxxx -u xxx -p xxxx -g 1 --gpu-engine=1100 --gpu-memclock=1500

For my cards this TC happens to be the sweet spot, you may want ti play a bit with it.

Also, there is big settings thread here:
https://bitcointalk.org/index.php?topic=416572.0

Anyone got good settings for a 270X?
Using  -w 256 --thread-concurrency 8192 -I 12 at the moment. Getting 150KH/s.

270X should be able to get a bit higher KH/s, right? Like 180 or something?

[BorisTheSpider]

Do you have the link to set up your own node? I'm hashing about 620 KH/s -- is that enough to be in a P2P pool? I'm getting sporadic payouts and I'm on the node that has the least latency to me, etc.

https://github.com/donSchoe/p2pool-vtc has instructions if you scroll down, especially make sure you read all of the readme and the bit at the bottom about using --net vertcoin.

If you want to run it as a daemon, there is a regular p2pool init script you can adapt. The same goes for vertcoind (just search for bitcoind init script and adapt it), then to have them run at boot just sudo update-rc.d vertcoind defaults and sudo update-rc.d p2pool defaults etc.

I'll see about doing a howto for local p2pool nodes soon - the donschoe readme in the github is fine, but something that included the init scripts would help new users get it up and running in a neat and tidy way.

[ieatm3s]

Boris: is the pool just so unlucky at the moment or is there another reason why there are no payouts in the last 4 hours? It shows I only mined 5 coins in that time with ~1.8Mhash...
EDIT: also querytime is about 300-600ms? pretty sure there isn't a problem on my end.

[blacklig]

Do you have the link to set up your own node? I'm hashing about 620 KH/s -- is that enough to be in a P2P pool? I'm getting sporadic payouts and I'm on the node that has the least latency to me, etc.

https://github.com/donSchoe/p2pool-vtc has instructions if you scroll down, especially make sure you read all of the readme and the bit at the bottom about using --net vertcoin.

If you want to run it as a daemon, there is a regular p2pool init script you can adapt. The same goes for vertcoind (just search for bitcoind init script and adapt it), then to have them run at boot just sudo update-rc.d vertcoind defaults and sudo update-rc.d p2pool defaults etc.

I'll see about doing a howto for local p2pool nodes soon - the donschoe readme in the github is fine, but something that included the init scripts would help new users get it up and running in a neat and tidy way.

where do u guys mine?

Kilovolt is having problems, and bitcrush is not paying anything actually.. I have been ming there whole night and minted 10 VTC??? wiht 2.5 mhs? What a heck..
I feel raped..
So please give me some tip to reliable pool that is paying :/

[Fastpow]

Boris: is the pool just so unlucky at the moment or is there another reason why there are no payouts in the last 4 hours? It shows I only mined 5 coins in that time with ~1.8Mhash...

got the same problem, no payouts for a loong time :/

[gonzzo]

Boris: is the pool just so unlucky at the moment or is there another reason why there are no payouts in the last 4 hours? It shows I only mined 5 coins in that time with ~1.8Mhash...

got the same problem, no payouts for a loong time :/

yep same here ....  chnaged to crunchpool with one of my worker to check things out

[mirny]

where do u guys mine?

Kilovolt is having problems, and bitcrush is not paying anything actually.. I have been ming there whole night and minted 10 VTC??? wiht 2.5 mhs? What a heck..
I feel raped..
So please give me some tip to reliable pool that is paying :/

can try here: http://p2pool.etyd.org:9171/static/#
or pick node which is closest to you, with good latency

Payouts:
Block    Time    Luck    Value (VTC)
28584   Mon, 03 Feb 2014 13:48:34 GMT   0.508   50.000
28575   Mon, 03 Feb 2014 13:35:13 GMT   0.344   50.005
28569   Mon, 03 Feb 2014 13:15:29 GMT   40.0   50.000
28568   Mon, 03 Feb 2014 13:15:19 GMT   1.05   50.002
28566   Mon, 03 Feb 2014 13:08:52 GMT   3.41   50.000
28564   Mon, 03 Feb 2014 13:06:53 GMT   1.69   50.005
28563   Mon, 03 Feb 2014 13:02:53 GMT   0.267   50.004
28558   Mon, 03 Feb 2014 12:37:32 GMT   6.99   50.004
28557   Mon, 03 Feb 2014 12:36:34 GMT   4.90   50.001
28556   Mon, 03 Feb 2014 12:35:11 GMT   2.38   50.002
28554   Mon, 03 Feb 2014 12:32:20 GMT   5.29   50.002
28553   Mon, 03 Feb 2014 12:31:03 GMT   0.467   50.005
28551   Mon, 03 Feb 2014 12:16:32 GMT   500   50.000
28550   Mon, 03 Feb 2014 12:16:31 GMT   2.59   50.000
28549   Mon, 03 Feb 2014 12:13:54 GMT   0.971   50.000
28546   Mon, 03 Feb 2014 12:06:55 GMT   7.81   50.000
28545   Mon, 03 Feb 2014 12:06:03 GMT   0.707   50.001
...

[hvezdasmrti]

VERTCOIN POOLS FUUUUU

Again noob pools which die at first overload or ddos. Like at all other coins before. Coin goes up, ddosers point at its pools and the pools die all like flies.

[Fastpow]

Clicky the first REAL scrypt asics.
Embrace this opportunity to promote vertcoin even more

And btw. any news on why p2p isn't paying out?

[mattbigblue]

Do you have the link to set up your own node? I'm hashing about 620 KH/s -- is that enough to be in a P2P pool? I'm getting sporadic payouts and I'm on the node that has the least latency to me, etc.

https://github.com/donSchoe/p2pool-vtc has instructions if you scroll down, especially make sure you read all of the readme and the bit at the bottom about using --net vertcoin.

If you want to run it as a daemon, there is a regular p2pool init script you can adapt. The same goes for vertcoind (just search for bitcoind init script and adapt it), then to have them run at boot just sudo update-rc.d vertcoind defaults and sudo update-rc.d p2pool defaults etc.

I'll see about doing a howto for local p2pool nodes soon - the donschoe readme in the github is fine, but something that included the init scripts would help new users get it up and running in a neat and tidy way.

I've connected to the pools with the smallest latency (~50ms). I'm at work will check that later, but I'm windows user. Would it be possible to create my own nood with just basic programming background by just reading github You advised?

[Bufius]

to keep you informed

I will release a new vertminer-0.5.3 today when i am back at home (in ~3 hours).
Windows build is ready and i got feedback the R9 issues with crashes are solved.

[nasone32]

 

[Zatamas]

to keep you informed

I will release a new vertminer-0.5.3 today when i am back at home (in ~3 hours).
Windows build is ready and i got feedback the R9 issues with crashes are solved.

Good news !

[ieatm3s]

to keep you informed

I will release a new vertminer-0.5.3 today when i am back at home (in ~3 hours).
Windows build is ready and i got feedback the R9 issues with crashes are solved.

Nice. I think I am not alone on this one.. Any performance improvements?

[gonzzo]

to keep you informed

I will release a new vertminer-0.5.3 today when i am back at home (in ~3 hours).
Windows build is ready and i got feedback the R9 issues with crashes are solved.

ohh sounds great!

[gonzzo]

Boris: is the pool just so unlucky at the moment or is there another reason why there are no payouts in the last 4 hours? It shows I only mined 5 coins in that time with ~1.8Mhash...

got the same problem, no payouts for a loong time :/

yep same here ....  chnaged to crunchpool with one of my worker to check things out

ok coins coming in from my worker on crunchpool !