Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[Basnoff]

Hmm. Difficulty seems to be going up again.
As does the BTC/USD rate. Good.

[roy7]

Can someone provide a link, instructions, or tutorial on how to join a p2p pool?  I just figured out how to mine in a traditional pool.  But I only have one gpu. I am thinking I should be able to do better in a p2p pool, correct?

Variance will be higher in p2pool than a normal pool. You connect just like a normal pool, but use your payment address as the username and any password as password. As a tiny miner you should either run p2pool yourself, or add "/.00001" to your username when you connect. That will increase the dust in your wallet (smaller payouts) but will prevent the variance where you get very few payouts. (They will average out to your expected earnings long-term but most small miners get frustrated with public nodes if they don't use the /.00001 trick.)

I'm running a patch atm to reduce small miner variance on my east p2pool node if you want to try it. Not as many shares as /.00001 but also less dust. Patch isn't needed if you install and run p2pool on your own computer.

[jballs]

Hmm. Difficulty seems to be going up again.
As does the BTC/USD rate. Good.

I am still trying to get my brain around the tempo of coin markets, they move faster than most of what I am accustomed to. Sure looks like a floor on btc though. Noticed this has been the longest streak of down days for I could find on the chart

http://bitcoinwisdom.com/markets/bitstamp/btcusd

So considering we launched into that... I am cautiously bullish on cryptos today and if we can move into the green I have little doubt Vert will be top performer.  

[ieatm3s]

Hmm. Difficulty seems to be going up again.
As does the BTC/USD rate. Good.

Maxcoin getting dumped to death. People switching to VTC. Here we go!

[jballs]

Hmm. Difficulty seems to be going up again.
As does the BTC/USD rate. Good.

Maxcoin getting dumped to death. People switching to VTC. Here we go!

Buy wall at crypled

[Suika]

How much difference can a well setup pool make??  If you know how pools work, this will make your mouth water...

So according to your pool's block found stats as of this posting:

Time Frame	Blocks Found
Last Hour	0
Last 24 Hours	11

Now let's take another pool, such as Bitcrush:

Time Frame	Blocks Found
Last Hour	3
Last 24 Hours	100

I'm not quite seeing how your pool is better in this case...?

[mrbrdo]

Could one of the developers please address this issue: https://bitcointalk.org/index.php?topic=416572.msg4971799#msg4971799
There have been several people in that thread that responded they had the same issue. I am worried that this will kill my cards. I have had this problem after a day of mining VTC on two separate rigs (different cards too, 7950 and 280X).

Short recap of the issue:
After mining VTC for some time, some cards start showing 511 C and 0 RPM in Vertminer, are not hashing, and get very hot. Even after coldreboot, the problem does not go away, and also appears in normal cgminer (which previously never exhibited this issue). It seems it is necessary to turn off and wait some time before it starts working again. I've never had this problem with the normal cgminer. On some of my 7950s, after this issue occured, I never reached back the same hashrate as before (about 50KH/s lower in normal cgminer).

Vertminer 0.5.3.

I also noticed that when I use I13, TC8193 on my 280X (the I13 is crucial), I will get 1 or 2 HW errors when I start vertminer, but no (or not many) more after that. I am wondering if this could be related. However at I12 I cannot get more than around 270 KH/s, while I get 360 on I13.

[TotalPanda]

Satoshi Nakamoto
Satoshi Nakamoto
Satoshi Nakamoto
Satoshi Nakamoto
Satoshi Nakamoto
Satoshi Nakamoto

You're kidding me, right?

please tell me you are not serious, of course its not!

second level of interpretation 

[vlad_kos]

how to set up GV-R929OC-4GD-GA, shows 280Kh/s - (((
"--vectors 1 --worksize 256 --auto-fan -I 13 --thread-concurrency 8192 --lookup-gap 2 --gpu-dyninterval 7 --gpu-engine 1060  --gpu-platform 0  --gpu-memclock 1450  --gpu-memdiff 0  --temp-target 60 --temp-overheat 80 --temp-cutoff 85 --temp-hysteresis 3 --no-pool-disable --scan-time 1 --expiry 60 --hotplug 0 --log 5 --no-submit-stale --queue 0 --shares 0 --gpu-threads 1 --auto-gpu

[ieatm3s]

Vlad_kos: Tc 24550, I 19 should do the trick.

[rsx19]

im trying to run an intensity flag on my gtx 670 but eveytime i try the mcd just insta closes on me

how do i write k7x32 on my bat file

[Basnoff]

im trying to run an intensity flag on my gtx 670 but eveytime i try the mcd just insta closes on me

how do i write k7x32 on my bat file

rsx19,

You might have more luck in the Vertcoin setting thread:
https://bitcointalk.org/index.php?topic=416572.0

(And I have no experience with CUDA at all, sorry)

[GurungBoi]

is Crystsy having trouble with vertcoin deposits or something?
Or am i reading the block explorer wrongly..
the approx time.. is that in GMT or EST?

http://explorer.vertcoin.org/address/VwUKAp9eNwuSXWQx4yrpAXyhrzcB9icBRZ

[quarkkid]

We are seeing some considerable gains now....

[ronaldinho_07]

how to set up GV-R929OC-4GD-GA, shows 280Kh/s - (((
"--vectors 1 --worksize 256 --auto-fan -I 13 --thread-concurrency 8192 --lookup-gap 2 --gpu-dyninterval 7 --gpu-engine 1060  --gpu-platform 0  --gpu-memclock 1450  --gpu-memdiff 0  --temp-target 60 --temp-overheat 80 --temp-cutoff 85 --temp-hysteresis 3 --no-pool-disable --scan-time 1 --expiry 60 --hotplug 0 --log 5 --no-submit-stale --queue 0 --shares 0 --gpu-threads 1 --auto-gpu

--lookup-gap 2 --thread-concurrency 21762 -g 1 -I 16 -w 512 --gpu-reorder --gpu-powertune 10

that's all you need
it's hot here,so i set core/mem at 980/1250Mhz(try to change mem clock to 1500Mhz if your card uses elpida ram)...gettin' around 400Khash
tc 32756 also works well

[sammy007]

What you are doing @ coinedup? VTC is 0.006 on cryptsy. Oh, I have no BTC for arbitrage.

[ieatm3s]

We are seeing some considerable gains now....

Looks like one chinese whale is really hungry. Edit: and so the dump begins...

[sammy007]

Maxcoin scams are going to launch stacycoin. Expect low hashrate next week to mine more VTC.

[Basnoff]

Maxcoin scams are going to launch stacycoin. Expect low hashrate next week to mine more VTC.

Wait, that incompetent bunch is going for it again? Going to need some more popcorn.

[rahrahrah]

Just wanted to share this awesome work by LukeMaxwell:
The logo was originally designed by khanwaltman.



http://www.reddit.com/r/vertcoin/comments/1xem60/id_like_to_offer_my_services_to_help_spruce_up/

can anybody create a additional button with "We Support Vertcoin" or ""Supporting Vertcoin" oder something similar ?

This is gorgeous. Any word on this from the official team?