[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[Jarod1231]

LTC isnt even $30

We can dream can't we? 

[imginy]

Curious, is there a reliable calculator for mining yet? What would 1000khs get in 24 hours?

Thanks

diff is all over the place

with 1000 hashes I got 400 in the first week and 200 in the second week.

Diffs going down again so I might get 300 this week.

im at roughly 700kh and ill get around 20 per day. for a little while there, it was tough finding blocks at coinsniper, but were good now.

Im at utcray and it seems to be immune to most of the DDOS so keeps going when the others are offline

[imginy]

I been doing the rounds posting on various sites and boxs about ultracoin.

everyone chip in do some advertising!!!

Lets get rich

[ozkraut]

I been doing the rounds posting on various sites and boxs about ultracoin.

everyone chip in do some advertising!!!

Lets get rich

+1. All make a little wave somewhere. You never know where the ripples end up.
Let's have a chance to get noticed by throwing some pebbles in the pool. If anyone has a boulder: even better.
 Then, who knows...

[lemfuture]

$30 soon 

Boy that'd be nice... $18k in my pocket 

that would be $1140000 for me so i dont think it will be 30 lol.
mabye $2 that would be $76000 that would be nice for me:)

dream believe survive, starstruck

[Robert Lewandowski]

$30 soon 

Boy that'd be nice... $18k in my pocket 

that would be $1140000 for me so i dont think it will be 30 lol.
mabye $2 that would be $76000 that would be nice for me:)

lol good joke

[ozkraut]

Our dev will review your work, and if it is selected we will launch it for a 2 week evaluation period in which the community can use it so we may test it for flaws and bugs.
 
After the work has passed the quality norm,you will receive your reward, and it will be visible on our homepage.
 
such jobs include:
 
-Blockchain explorer       -     7500 UTC

-Android wallet              -     3000 UTC
 
-Mac wallet                   -     3000 UTC

-mac os gpu miner         -     3000 UTC

-Linux wallet                 -     3000 UTC
  
-Linux gpu miner            -     3000 UTC


If you feel you are a capable developer, you may start one of these jobs at once, please announce that you are working on it on this thread.

Hi Bumface,

just noticed the above : anybody claimed the linux gpu bounty yet ? Else if the patched and compiled version I submitted might qualify (;-). Been tested & run by others in the community and is found to be working. Ah: and its included on page 1 / post 1.
Can recompile the exe to utc_miner if really necessary. Anyhow: go the bounty eh ?

[laterbreh]

Hi all,

I created a very simple video to get new users started on how to mine ultracoin. I demonstrate using cgminer patched, and ultracoin miner, and I provide some example configurations.

I hope that all new users find this video useful.


(720p HD)
http://youtu.be/5fHAzFRAN48

Thank you,
-Laterbreh

[imginy]

you really need to get this coin on a working exchange.

It's been over 2 weeks come on you can do it 

[Carlitos714]

Hi all,

I created a very simple video to get new users started on how to mine ultracoin. I demonstrate using cgminer patched, and ultracoin miner, and I provide some example configurations.

I hope that all new users find this video useful.


(720p HD)
http://youtu.be/5fHAzFRAN48

Thank you,
-Laterbreh

cool man. I wish this vid was available when I first started. Anyhow, great video. I did post a question on youtube

[laterbreh]

Hi all,

I created a very simple video to get new users started on how to mine ultracoin. I demonstrate using cgminer patched, and ultracoin miner, and I provide some example configurations.

I hope that all new users find this video useful.


(720p HD)
http://youtu.be/5fHAzFRAN48

Thank you,
-Laterbreh

cool man. I wish this vid was available when I first started. Anyhow, great video. I did post a question on youtube

Saw it! Thank you!

Yea, if all of your cards are the same, you dont need to comma them. 1 command will cover all of them. For the ones you specifically requested, 1 covers all cards even if they are different.

[ozkraut]

Our dev will review your work, and if it is selected we will launch it for a 2 week evaluation period in which the community can use it so we may test it for flaws and bugs.
 
After the work has passed the quality norm,you will receive your reward, and it will be visible on our homepage.
 
such jobs include:
 
-Blockchain explorer       -     7500 UTC

-Android wallet              -     3000 UTC
 
-Mac wallet                   -     3000 UTC

-mac os gpu miner         -     3000 UTC

-Linux wallet                 -     3000 UTC
  
-Linux gpu miner            -     3000 UTC


If you feel you are a capable developer, you may start one of these jobs at once, please announce that you are working on it on this thread.

Hi Bumface,

just noticed the above : anybody claimed the linux gpu bounty yet ? Else if the patched and compiled version I submitted might qualify (;-). Been tested & run by others in the community and is found to be working. Ah: and its included on page 1 / post 1.
Can recompile the exe to utc_miner if really necessary. Anyhow: go the bounty eh ?

[XTR]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

[ozkraut]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

im running two and am getting 574 ish each stable at coolish temps (64c & 62c Australia Summer). thats running --G2  8191 TC, 1065 GPU, 1500 Mem.
Ive seen postings of people claiming mid low sixes with G1 high TC and high clock 1075 and 1700'ish mem clock. Too hot for me here right now I believe

[ozkraut]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

im running two and am getting 574 ish each stable at coolish temps (64c & 62c Australia Summer). thats running --G2  8191 TC, 1065 GPU, 1500 Mem.
Ive seen postings of people claiming mid low sixes with G1 high TC and high clock 1075 and 1700'ish mem clock. Too hot for me here right now I believe

Ah: forgot: you are tuning each separately ? eg with comma delimitation ?

eg --gpu-memclock 1500,1550 --gpu-engine 1065,1070

they do respond differently on sometimes small changes. Slower is not always the wrong direction to go either. When I go over 1070 on one card it just drops into the early 5's. Yet at 1065 it runs in the 570's. Same with memory. Around 1500 seems best. But YMMV

[XTR]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

im running two and am getting 574 ish each stable at coolish temps (64c & 62c Australia Summer). thats running --G2  8191 TC, 1065 GPU, 1500 Mem.
Ive seen postings of people claiming mid low sixes with G1 high TC and high clock 1075 and 1700'ish mem clock. Too hot for me here right now I believe

Ah: forgot: you are tuning each separately ? eg with comma delimitation ?

eg --gpu-memclock 1500,1550 --gpu-engine 1065,1070

they do respond differently on sometimes small changes. Slower is not always the wrong direction to go either. When I go over 1070 on one card it just drops into the early 5's. Yet at 1065 it runs in the 570's. Same with memory. Around 1500 seems best. But YMMV

The cards i'm using are gigabyte 280x with factory core oc of 1100 and I did have everything set individually per card in the batch because I believe one has a different ram manufacturer which always caused it to work poorly on higher clock speeds with normal scrypt.  Though after reading both of your posts I had the idea to switch back to default clocks of 1100,1100 and now i'm getting a solid 595 & 592 Kh/s @ 65c (though its located in a basement so the ambient is nice and cool)

Thank you guys for the quick replies!

[ozkraut]

A question for solo mining

are there any
addnode=

ip's available for the .conf file?

I can't find any IP addresses to include mentioned and I tend to have to be mindful of my ping being down under so if anyone knows: much appreciated


Any ideas ?

[ozkraut]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

im running two and am getting 574 ish each stable at coolish temps (64c & 62c Australia Summer). thats running --G2  8191 TC, 1065 GPU, 1500 Mem.
Ive seen postings of people claiming mid low sixes with G1 high TC and high clock 1075 and 1700'ish mem clock. Too hot for me here right now I believe

Ah: forgot: you are tuning each separately ? eg with comma delimitation ?

eg --gpu-memclock 1500,1550 --gpu-engine 1065,1070

they do respond differently on sometimes small changes. Slower is not always the wrong direction to go either. When I go over 1070 on one card it just drops into the early 5's. Yet at 1065 it runs in the 570's. Same with memory. Around 1500 seems best. But YMMV

The cards i'm using are gigabyte 280x with factory core oc of 1100 and I did have everything set individually per card in the batch because I believe one has a different ram manufacturer which always caused it to work poorly on higher clock speeds with normal scrypt.  Though after reading both of your posts I had the idea to switch back to default clocks of 1100,1100 and now i'm getting a solid 595 & 592 Kh/s @ 65c (though its located in a basement so the ambient is nice and cool)

Thank you guys for the quick replies!

just set 1100,1100
up to 590 straight away. watching temps and HW but good so far. Works both ways the forum stuff eh ?

[XTR]

Hey guys,

I wanted to know if anyone could shed some light on my hashrates if they are running as high as they should be.

Basically to make it simple my most optimal configuration is 584 Kh/s on a 280x,  is that a good rate?
I have another one that runs at 567 Kh/s but all GPUs are not created equally.

im running two and am getting 574 ish each stable at coolish temps (64c & 62c Australia Summer). thats running --G2  8191 TC, 1065 GPU, 1500 Mem.
Ive seen postings of people claiming mid low sixes with G1 high TC and high clock 1075 and 1700'ish mem clock. Too hot for me here right now I believe

Ah: forgot: you are tuning each separately ? eg with comma delimitation ?

eg --gpu-memclock 1500,1550 --gpu-engine 1065,1070

they do respond differently on sometimes small changes. Slower is not always the wrong direction to go either. When I go over 1070 on one card it just drops into the early 5's. Yet at 1065 it runs in the 570's. Same with memory. Around 1500 seems best. But YMMV

The cards i'm using are gigabyte 280x with factory core oc of 1100 and I did have everything set individually per card in the batch because I believe one has a different ram manufacturer which always caused it to work poorly on higher clock speeds with normal scrypt.  Though after reading both of your posts I had the idea to switch back to default clocks of 1100,1100 and now i'm getting a solid 595 & 592 Kh/s @ 65c (though its located in a basement so the ambient is nice and cool)

Thank you guys for the quick replies!

just set 1100,1100
up to 590 straight away. watching temps and HW but good so far. Works both ways the forum stuff eh ?

ahahahaha guess so! glad we managed to help each other on that one.

A question for solo mining

are there any
addnode=

ip's available for the .conf file?

I can't find any IP addresses to include mentioned and I tend to have to be mindful of my ping being down under so if anyone knows: much appreciated


Any ideas ?

There are some IPs in my debug.log, the ones my client connected to would be considered nodes correct?

[eeaweeaws]

it seems crypo-trade slow problem is fixed.
but the price keeps falling~~~~

i keep 816 utc for POS..still on your side bro.keep going