[ANN] [CHC] Chaincoin - Network Upgrade 16.3 - SegWit Activated

[deadcast]

I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running

Code:

chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled.

I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee

It can take up to a week to get your first payout. I'm running 7 masternodes and they are all paying out every 1-2 days. Just wait a little bit longer to see if you get any payout.

[deadcast]

the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.

GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!

Hi! Try not to let these trolls get to you if possible. Seems like they exist everywhere and we're just gonna have to learn to ignore them until they want to be constructive. They have sour attitudes sure, but they could change in the future and be a good little boy or girl lol. So I stay light hearted and just chuckle at what haters say unless they can support their claims with good, solid evidence then I'll listen. But until then they're just like court jesters to me! :p

Cheers!

[deadcast]

Good news! The social tab has finally been updated on coinmarketcap for CHC -> https://coinmarketcap.com/currencies/chaincoin/#social Woot woot!

Make sure to follow them if you're not already! 

[IgorVeyn]

I fixed it and ran it, how to check it works?

You can check to see if your masternode is enabled by running

Code:

chaincoind masternodelist status your-masternode-ip-address-here

It should then tell you it's enabled.

I started the masternode, it was written masternode started, after 4 hours on the account as before 1000 (CHC), I suspect that it does not work.
Who can write briefly what to write in the Configuration file?
Pleaseee

It can take up to a week to get your first payout. I'm running 7 masternodes and they are all paying out every 1-2 days. Just wait a little bit longer to see if you get any payout.

Send an example filled with Chaincoin.conf please

[Temporel]

the dev team and the work they made so far are one big fat joke and only ignorant cant understand why this coin is dead.

GTFO please.
I'm really tired of your entire bullshit. I'm not a fan or a con of CHC, I mined it for a week and I'm following this topic. Just that.
 For over 1 month or more, I've read your posts and I'm disgusted. Not because of your shitty posts, but of your insistence. If you see no one is taking your advice seriously, just please stop spreading shits.

Thank you.
Now bye!

Hi! Try not to let these trolls get to you if possible. Seems like they exist everywhere and we're just gonna have to learn to ignore them until they want to be constructive. They have sour attitudes sure, but they could change in the future and be a good little boy or girl lol. So I stay light hearted and just chuckle at what haters say unless they can support their claims with good, solid evidence then I'll listen. But until then they're just like court jesters to me! :p

Cheers!

yup, buy more CHC and lose more money, always listen to people who run or OWN CHC

[anwarmanha]

Hi Guys
is there any telegram group for this coin, i was blocked by the admin 

[deadcast]

Hi Guys
is there any telegram group for this coin, i was blocked by the admin 

Hello! Chain coin's official Telegram group is here https://t.me/chaincoin.

Where did you get blocked at? The slack group?

[Malrus]

Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:

checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.

[deadcast]

Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:

checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.

Hi! You need to install the libevent dependency in order to compile the latest chaincoin build. Run the following command and then you should be ready to compile!

Code:

sudo apt-get install libevent-dev

[IgorVeyn]

Hi all,
I am having  trouble compiling my first masternode and have the following error immediately before the 'make' command is used. (My swapfile size seems large enough...)

Code:

checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking whether __builtin_clz is declared... yes
checking whether __builtin_clzl is declared... yes
checking whether __builtin_clzll is declared... yes
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.
****************@**************** :~/chaincoin$ make
make: *** No targets specified and no makefile found.  Stop.

Hi! You need to install the libevent dependency in order to compile the latest chaincoin build. Run the following command and then you should be ready to compile!

Code:

sudo apt-get install libevent-dev

Hi guys.
Tell me please how to disconnect the Masternode and withdraw funds from the wallet?

[m33]

is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share

[cryptoninjapanda]

is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share

Everyone is getting a fair share. It is still random. People just don't know how to setup their MNs properly and are blaming the system. Dash changed the reward system in v0.12 so CHC will probably have the same change after v0.12 is implemented. It was on the roadmap last time I checked. But this new system will be even worse for people who don't know how to setup their MN.   

[garyoffenberg]

Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!

[Jeremythethird]

Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!

The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us?

[deadcast]

The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us?

Haha I agree! You simple just have to use the correct support channel in the slack and no worries. Lot's of helpful people there!

[deadcast]

is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share

Yes the coin is very much alive! For the most recent updates I highly recommend that you join the chaincoin slack group at https://chainteam.herokuapp.com/, if you haven't already. There should hopefully be a brand new website roll-out this week containing a new, detailed road map. Could be a great week for chaincoin! 

[TimC]

is this coin still alive , has the masternode been updateds , or is it still random rewards , pls fix it , every one should get a fair share

v0.9.3.0 - Required update
@chaincoin chaincoin released this 12 days ago · 35 commits to master since this release
https://github.com/chaincoin/chaincoin/releases

Code:

v0.9.3.0 - Required update for all users.

TOR support.
Hard fork for master nodes reward increase (35% ~end of Sep and 45% ~end of Oct).
Masternodes are required to run on port 11994 (single masternode per IP).
Various other fixes and improvements.

[garyoffenberg]

Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!

The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us?

Sorry man, i gave all the details i can, but brakmic accused me of attacking the code etc and was extremly rude. I had to log in with 3 accoutns, and they all are banned now. what i am not telling , if the conco is deleted, i have screenshots.

[Jeremythethird]

Guys, can you do something about that brakmic guy that rules the slack? He is totally out of control. I cant ask a simple support question without having my accounts banned. Would be great to have face outward that is not a lunatic!!

The fact that you are crying about the same thing in different channels, without giving us details on what happend makes it really hard to judge the whole situation

Also i find it very hard to believe that you were banned only cause you asked a simple support question, what are you not telling us?

Sorry man, i gave all the details i can, but brakmic accused me of attacking the code etc and was extremly rude. I had to log in with 3 accoutns, and they all are banned now. what i am not telling , if the conco is deleted, i have screenshots.

Hey,

I´d recomend making a proper case/post about this issue if you are serious about this. Cause atm its seems you are mad/salty cause you feel you got banned on unfair grounds

Added the fact, that you had 3 accounts banned does not paint a good picture of your attidude



If you dont want to make a proper case about this, just drop it and move on.

[jayohby]

scam pump and dump coin.

sorry to those who lost money on this piece of crap code coin