[GPUC] GPU Coin | Mandatory Wallet Update

[yaboymarvo]

What block are we on now?

1266

1279

1300!

[Sfirion]

Nice coin!
360Kh/s on each 280x!
What port should i use for solo mining? 127.0.0.1:xxxx ??

[ocminer]

You are mining GPUCoin on

https://gpu.suprnova.cc

now !

[buryat]

If some one have R9 270 OC and want to share settings with me I would be very grateful. I get 153 Kh/s with -I 12, i have to tell that i bought this card 3 days ago and my old PSU push out onlu 350W, these cards need at least 500W maybe this is the problem? the new PSU(850w) arrive these days.Thanks

I run 12 R9 270, they give me stable 220kh/s per card, 2 systems all together pull 2400w, it's ~170W per card

gpu-engine: 1040
gpu-memclock: 1450
gpu-powertune: 20
auto-fan: true
gpu-fan: 40-100
temp-target: 75
temp-overheat: 80
temp-cutoff: 85
gpu-threads: 1
worksize: 256
thread-concurrency: 12250
intensity: 20

[MsCollec]

When are you distributing the IPO coins

[eeaweeaws]

GPU Configs

Asus R9 280X
-v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --temp-overheat 85 --temp-cutoff 90 --gpu-memclock 1800 --gpu-engine 1080 --thread-concurrency 8192 --auto-fan --gpu-fan 60-100 --temp-target 75

I get about 390Kh/S


REMEMBER:

• 4 GPUS, at least 5-6 GB of RAM
• 5 GPUS  at least 7-8 GB of RAM
• 6 GPUS  at least 10GB of RAM

I have one right running 6 GPUs @ 12 GB; another 4 GPUS @ 4 GB (With the 5th GPU disabled). If I unplugged the 5th GPU all together, it will only let me run 3 GPUS @ 4GB. Yes, N-Scrypt is werid. 

--thread-concurrency 8192 -g 2 -I 12 -Q 0 -E 10 --lookup-gap 2 --gpu-memclock 1500 --gpu-engine 1150
4GB RAM with 5 280x
each 280x got 150 Kh..

[SpottyAtBest]

GPU Configs

Asus R9 280X
-v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --temp-overheat 85 --temp-cutoff 90 --gpu-memclock 1800 --gpu-engine 1080 --thread-concurrency 8192 --auto-fan --gpu-fan 60-100 --temp-target 75

I get about 390Kh/S


REMEMBER:

• 4 GPUS, at least 5-6 GB of RAM
• 5 GPUS  at least 7-8 GB of RAM
• 6 GPUS  at least 10GB of RAM

I have one right running 6 GPUs @ 12 GB; another 4 GPUS @ 4 GB (With the 5th GPU disabled). If I unplugged the 5th GPU all together, it will only let me run 3 GPUS @ 4GB. Yes, N-Scrypt is werid. 

--thread-concurrency 8192 -g 2 -I 12 -Q 0 -E 10 --lookup-gap 2 --gpu-memclock 1500 --gpu-engine 1150
4GB RAM with 5 280x
each 280x got 150 Kh..

With similar settings, I am getting about 280KH/s on each of 4 R9 280x's.  I think my issue is memory.  I only have 4GB on that system.  Maybe I need to add more RAM...

[SP4RK7]

When are you distributing the IPO coins

I think he said after the first 20000 block has been found.

[FCR]

GPU Configs

Asus R9 280X
-v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --temp-overheat 85 --temp-cutoff 90 --gpu-memclock 1800 --gpu-engine 1080 --thread-concurrency 8192 --auto-fan --gpu-fan 60-100 --temp-target 75

I get about 390Kh/S


REMEMBER:

• 4 GPUS, at least 5-6 GB of RAM
• 5 GPUS  at least 7-8 GB of RAM
• 6 GPUS  at least 10GB of RAM

I have one right running 6 GPUs @ 12 GB; another 4 GPUS @ 4 GB (With the 5th GPU disabled). If I unplugged the 5th GPU all together, it will only let me run 3 GPUS @ 4GB. Yes, N-Scrypt is werid.  

--thread-concurrency 8192 -g 2 -I 12 -Q 0 -E 10 --lookup-gap 2 --gpu-memclock 1500 --gpu-engine 1150
4GB RAM with 5 280x
each 280x got 150 Kh..

With similar settings, I am getting about 280KH/s on each of 4 R9 280x's.  I think my issue is memory.  I only have 4GB on that system.  Maybe I need to add more RAM...

I have 6 280x on one motherboard and I have only 4GB of system ram. I get 370kh/s on all 6 cards n-scrypt, 750kh/s on scrypt. I am using --TC 8193 -g2. I also have 5 270x on one motherboard and still 4GB system ram.

[laterbreh]

http://GPU.leetpools.com

DDOS PROTECTED
USA
PROP/VARDIFF
0% FEE PROMO

POOL'S Running Like A Champ:


Come chill in IRC #Leetpools on quakenet

Time to start mining like a boss.

[hilgi]

setting for HD 7870's

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
vertminer  -o stratum+tcp://POOL -u miner.worker -p pass --gpu-powertune 20 --gpu-engine 1150 --gpu-memclock 1210  -w 255 --lookup-gap 0 --thread-concurrency 6192 -g 1 --intensity 12

Im getting about 160khs, 72c

I Hope I can help some 7870's guy

What are your settings for regular script?

[sa_ddam213]

4 out of 5 of my miners just show

"Error -5: Enqueing Kernel onto command queue. <clEnqueueNDRangeKernel>"

Any ideas.

One miner is fine, 2 miners have one card working and show this error for the other cards, 2 miners show "OFF" for all cards and this error

Thanks

[SandraSandrina]

If some one have R9 270 OC and want to share settings with me I would be very grateful. I get 153 Kh/s with -I 12, i have to tell that i bought this card 3 days ago and my old PSU push out onlu 350W, these cards need at least 500W maybe this is the problem? the new PSU(850w) arrive these days.Thanks

I run 12 R9 270, they give me stable 220kh/s per card, 2 systems all together pull 2400w, it's ~170W per card

gpu-engine: 1040
gpu-memclock: 1450
gpu-powertune: 20
auto-fan: true
gpu-fan: 40-100
temp-target: 75
temp-overheat: 80
temp-cutoff: 85
gpu-threads: 1
worksize: 256
thread-concurrency: 12250
intensity: 20

Ohh the problem was Intensity I have now -I 20 gpu-engine: 1040 gpu-memclock: 1500  I got 200-205 Kh/s with 2 HW in 10min and temerature is steady 70 *C.. Thank you.

[sa_ddam213]

4 out of 5 of my miners just show

"Error -5: Enqueing Kernel onto command queue. <clEnqueueNDRangeKernel>"

Any ideas.

One miner is fine, 2 miners have one card working and show this error for the other cards, 2 miners show "OFF" for all cards and this error

Thanks

arrgggghhh Giving up on this coin, not wasting another nights hash.


Good luck guys

[FCR]

4 out of 5 of my miners just show

"Error -5: Enqueing Kernel onto command queue. <clEnqueueNDRangeKernel>"

Any ideas.

One miner is fine, 2 miners have one card working and show this error for the other cards, 2 miners show "OFF" for all cards and this error

Thanks

arrgggghhh Giving up on this coin, not wasting another nights hash.


Good luck guys

Your thread count is too high for how much system ram you have. Use -g2 for 2 threads and lower thread count. Or buy more ram.

[OakPools]

http://brightoak.com/images/oakpool-image-gpu.jpg
GPU.OakPool.com Is Up!

stratum+tcp://gpu.oakpool.com:3355
Come join the party <3

[sq]

GPU Coin release date added to AltCoinCalendar.info.

Check Coin Countdown


if you like our work donations are welcome.

[Tercel]

GPUCoin On
Nxt-e.com

[sa_ddam213]

4 out of 5 of my miners just show

"Error -5: Enqueing Kernel onto command queue. <clEnqueueNDRangeKernel>"

Any ideas.

One miner is fine, 2 miners have one card working and show this error for the other cards, 2 miners show "OFF" for all cards and this error

Thanks

arrgggghhh Giving up on this coin, not wasting another nights hash.


Good luck guys

Your thread count is too high for how much system ram you have. Use -g2 for 2 threads and lower thread count. Or buy more ram.

Buy more RAM, damn was hoping to be buying GPUs with this coin, LOL

How much would I need, I though all miners have 16GB, would 32GB work, seems expensive just to mine a coin.

Just notice the diff is already up to about 5 so my 8mhs wont make me a GPU now anyway.


Hope this works out goo for the power hashers as its a cool concept.

Happy mining all

[snogcel]

P2Pool: http://96.126.121.117:9404

What is P2Pool?

P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS (use a few nodes for a failover) and coins are sent directly to your wallet.

How do I start mining?

• Point your miner to: stratum+tcp://96.126.121.117:9404
• Use your GPUCoin address as the user (you can set anything as the password, it doesn't matter).

Fine Tuning:

It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:

Hash Rate * .0000011641

So if your hash rate is 1930 KHash and your wallet address was GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa, you'd want to set it up like so:

(1930 * .0000011641) = 0.002246713

Resulting in...

GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa+0.002246713

Vertminer Tuning:

• Intensity: <= 19 (or lower - you want to maximize the responsiveness of your miner)
• Queue: 0
• Scantime: 5