[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[alucard20724]

can we use  Claymore miner (AMD RX 480 gpus) and set miner to mine best algo (based on ETH) and second coin as DCR (or sia)? Then use auto exchange to BTC? If so, could you please share a bat file?

Thanks.

yes.. you can look in the readme.txt file of claymore's dualminer.  Or you can download
MultiPoolMiner Here or on the front page of MiningPoolHub here.

MiningPoolHub supports Sia, but not Decred yet.. but the ability to mine DCR is already in the software for when MiningPoolHub does support DCR

[1714123164]

1714123164

[1714123164]

1714123164

[tharrison159]

Hi All,

Sorry I'm a noob, I have mined some coins and they disappeared from my account, presumably auto exchanged, how do I find these coins on the exchange?

Thanks!

[kopija]

Hi All,

Sorry I'm a noob, I have mined some coins and they disappeared from my account, presumably auto exchanged, how do I find these coins on the exchange?

Thanks!

They are in the wallet of the coin you set in auto-exchange.
Bitcoin I presume?

[rednoW]

2 miningpoolhub

Any way or chance that you will add ability to set fixed diff on skein and other algos?

Why do you need fixed diff? Is there any special reason for it?
It maybe inefficient for client and pool both and vulnerable to low diff attacks.

you can set minimum allowed diff against low diff attacks.
I'm mining skein with my 4xgtx1070 rig and vardiff is doing very bad - it always change diff, often setting to impossible high values.
Also the start is the pain and with low diff at start I sometimes have low-diff shares errors.

[aaronsace]

is there a possibility of supporting Decred or Pascal sometime in the future?... i want to be able to optimize ROI should one of the others coins become more profitable in Dual mining.

Yeah I'll add that.
I try to add them as fast as possible but busy with pool works already. Sorry about it.

oh.. and just sia would be nice too.  nicehash has a version of excavator that does just 'sia' for one of the coins.  was running it on nicehash pool earlier for my nvidia cards.

I'm going to add Sia Excavator to MultiPoolMiner but NiceHash are being anything but nice.

yeah... i've noticed that.  They like to bash their competitors with baseless claims.

Reminds me of this: https://bitcointalk.org/index.php?topic=1707546.msg17344495#msg17344495
They don't care about dev fee, they just want to dominate and monopolize.

[Etherion]

I really hope miningpoolhub.com will add Decred/Lbry/Pascal soon.

[aaronsace]

I really hope miningpoolhub.com will add Decred/Lbry/Pascal soon.

Yes, eager to get dual mining profit switching up.
Think he is working as fast has he can.

Doesn't help with the DDOS attacks that are attempting to disrupt the pool.
When something gets good they get targeted, shame.

[alucard20724]

I really hope miningpoolhub.com will add Decred/Lbry/Pascal soon.

Yes, eager to get dual mining profit switching up.
Think he is working as fast has he can.

Doesn't help with the DDOS attacks that are attempting to disrupt the pool.
When something gets good they get targeted, shame.

is there something wrong with the pool or multipoolminer... when i got home just now, all my miners are saying sia coin is double digit profits.. i know that isn't correct.. it's either the pool or the software... it's telling me that 3.2 gh/s earns 64 btc per day with sia

I've disabled dual-mining on my rigs.

[alucard20724]

is there a possibility of supporting Decred or Pascal sometime in the future?... i want to be able to optimize ROI should one of the others coins become more profitable in Dual mining.

Yeah I'll add that.
I try to add them as fast as possible but busy with pool works already. Sorry about it.

oh.. and just sia would be nice too.  nicehash has a version of excavator that does just 'sia' for one of the coins.  was running it on nicehash pool earlier for my nvidia cards.

I'm going to add Sia Excavator to MultiPoolMiner but NiceHash are being anything but nice.

yeah... i've noticed that.  They like to bash their competitors with baseless claims.

Reminds me of this: https://bitcointalk.org/index.php?topic=1707546.msg17344495#msg17344495
They don't care about dev fee, they just want to dominate and monopolize.

i used be on their side until they stopped developing, and then ewbf became faster.  and still faster than what they have available.  they've quieted down a bit about it now that it's been proven they were wrong.  even with their new excavator, they are still slower, but they are catching up little by little.

[Call_Me_Bambi]

Hi all,

I'm new here (and to mining) and not sure if this post will get to where it is intended but here goes...

My setup:
OS Windows 7 x64. Two cards installed , RX 480 & R9 270x.

Just started trying out mining about 2 weeks ago and have got it up-and-running quite well, so thought I'd give "MiningPoolHub_Specific MultiPoolMinerV2.5.1.2" a go.
It worked just fine - no errors and coins started rolling in, but...
I left it running for a few hour and when I came back it looked like it was stuck on Ethdcrminer64 and no coins were updating on Mining Pool Hub.

I deleted all but the benchmarks and installed a fresh copy but it still gave the same errors.
Any help will be most appreciated,
ManyThanks.

           It kept giving the following error over and over again:

Miner                     BTC      USD
-----                     ---      ---
MultiPoolMiner            0.04229  89.65473
ClaymoreDual40-Ethash/Sia 13.69725 29,037.93427

Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException

          The startup log also gave this error:

Process ID: 3252
PSVersion: 5.1.14409.1005
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.14409.1005
BuildVersion: 10.0.14409.1005
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\2017-05-23_01-24-16.txt
Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException
Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException

[aaronsace]

Hi all,

I'm new here (and to mining) and not sure if this post will get to where it is intended but here goes...

My setup:
OS Windows 7 x64. Two cards installed , RX 480 & R9 270x.

Just started trying out mining about 2 weeks ago and have got it up-and-running quite well, so thought I'd give "MiningPoolHub_Specific MultiPoolMinerV2.5.1.2" a go.
It worked just fine - no errors and coins started rolling in, but...
I left it running for a few hour and when I came back it looked like it was stuck on Ethdcrminer64 and no coins were updating on Mining Pool Hub.

I deleted all but the benchmarks and installed a fresh copy but it still gave the same errors.
Any help will be most appreciated,
ManyThanks.

           It kept giving the following error over and over again:

Miner                     BTC      USD
-----                     ---      ---
MultiPoolMiner            0.04229  89.65473
ClaymoreDual40-Ethash/Sia 13.69725 29,037.93427

Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException

          The startup log also gave this error:

Process ID: 3252
PSVersion: 5.1.14409.1005
PSEdition: Desktop
PSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.14409.1005
BuildVersion: 10.0.14409.1005
CLRVersion: 4.0.30319.42000
WSManStackVersion: 3.0
PSRemotingProtocolVersion: 2.3
SerializationVersion: 1.1.0.1
**********************
Transcript started, output file is .\Logs\2017-05-23_01-24-16.txt
Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException
Value was either too large or too small for a Decimal.
At I:\MiningPoolHub_Specific MultiPoolMinerV2.5.1.2\Include.ps1:58 char:5
+     $Stat = [PSCustomObject]@{
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException

Delete excavator from the folder called 'miners'.

[alucard20724]

Hi all,

blah blah blah


    + FullyQualifiedErrorId : RuntimeException

Delete excavator from the folder called 'miners'.

excavator is the culprit?

[miningpoolhub]

can we use  Claymore miner (AMD RX 480 gpus) and set miner to mine best algo (based on ETH) and second coin as DCR (or sia)? Then use auto exchange to BTC? If so, could you please share a bat file?

Thanks.

Here's sample commandline.

EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:17020 -ewal username.workername -eworker username.workername -esm 2 -epsw x -allpools 1 -allcoins 1 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal username.workername -dpsw x -dcoin sc

Set auto exchange coin you like.

[aaronsace]

Hi all,

blah blah blah


    + FullyQualifiedErrorId : RuntimeException

Delete excavator from the folder called 'miners'.

excavator is the culprit?

If you downloaded a fresh copy; then yes.

[miningpoolhub]

Hi All,

Sorry I'm a noob, I have mined some coins and they disappeared from my account, presumably auto exchanged, how do I find these coins on the exchange?

Thanks!

Check Balances page after login.
https://miningpoolhub.com/?page=account&action=balances

[miningpoolhub]

2 miningpoolhub

Any way or chance that you will add ability to set fixed diff on skein and other algos?

Why do you need fixed diff? Is there any special reason for it?
It maybe inefficient for client and pool both and vulnerable to low diff attacks.

you can set minimum allowed diff against low diff attacks.
I'm mining skein with my 4xgtx1070 rig and vardiff is doing very bad - it always change diff, often setting to impossible high values.
Also the start is the pain and with low diff at start I sometimes have low-diff shares errors.

Can you suggest me your best working diff value?
I'll change initial diff to that.

[miningpoolhub]

I really hope miningpoolhub.com will add Decred/Lbry/Pascal soon.

Yeah I really feel sorry about this. Sorry for late.

[Call_Me_Bambi]

I deleted "ExcavatorNvidia.txt" from the 'miners' folder (the only thing that had 'Excavator' in the title but that did not work, still getting same error.

When installing it I had to download "api-ms-win-core-libraryloader-l1-2-0.dll" as Win7AndW2K8R2-KB3134760, and a newer one (I think) from Microsoft web site did not install it so MultiPoolMiner did not even start at first - complained about the missing DLL.

I do like your MultiPoolMiner, it's great, and would hate to have to bin it.

Hope you can help,
Thanks again.

[miningpoolhub]

I really hope miningpoolhub.com will add Decred/Lbry/Pascal soon.

Yes, eager to get dual mining profit switching up.
Think he is working as fast has he can.

Doesn't help with the DDOS attacks that are attempting to disrupt the pool.
When something gets good they get targeted, shame.

is there something wrong with the pool or multipoolminer... when i got home just now, all my miners are saying sia coin is double digit profits.. i know that isn't correct.. it's either the pool or the software... it's telling me that 3.2 gh/s earns 64 btc per day with sia

I've disabled dual-mining on my rigs.

It's becasue Bittrex opened Siacoin exchange.

Price was high at first and currently 2x higher than Poloniex.
https://bittrex.com/Market/Index?MarketName=BTC-SC

[fonyo]

Any plans for adding LBRY?

On that note, any news on Decred?

It's delayed due to DDoS attack. I'm configuring backend servers these days.
Sorry but I'm doing my best.

That is perfectly fine, boss. At least we know why. We just need some status updates and basic comms from time to time.

You're welcome. I feel sorry for being late.

I think I should work with someone else. It's getting hard to maintain by one man.

Are you still trying to maintain this massive pool by yourself? Geez! I'm impressed, though.