aaronsace
|
|
December 07, 2017, 01:36:01 PM |
|
Alright, thanks. I was thinking about replacing one of the 1060s with a 1070 (using 4 1060s ATM).. not sure if that is a good idea if they are all going to mine the same thing. Average profit a day or week? Where do i set the payouts? I don't see it :/ lol Also https://i.imgur.com/8N7S9lR.png Musicoin keeps popping in an out of my balances.. kinda odd. heh Don't worry about mixing, it will work fine. Average is over a week so it should give an accurate average of your machine without fluctuating too much. The balance gives you a good snapshot but it's based on cached information so there will be amounts appearing and reappearing sometimes. Each coin is a separate pool and the exchanges are done externally.
|
|
|
|
SuperDerpBro
|
|
December 07, 2017, 01:40:16 PM Last edit: December 07, 2017, 01:53:32 PM by SuperDerpBro |
|
18 a week seems really low for 4 1060s https://i.imgur.com/Ie03txk.pngI assume i just add the same address as in my bat file? EDIT: anything i can do to tweak this better? setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog" And .. what is watchdog?
|
|
|
|
aaronsace
|
|
December 07, 2017, 01:53:22 PM |
|
18 a week seems really low for 4 1060s https://i.imgur.com/Ie03txk.pngI assume i just add the same address as in my bat file? EDIT: anything i can do to tweak this better? setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog" And .. what is watchdog? It's $18 a day i.e. USD/Day Yep, that's where your Bitcoin address is. https://en.wikipedia.org/wiki/Watchdog_timer
|
|
|
|
SuperDerpBro
|
|
December 07, 2017, 01:58:49 PM Last edit: December 07, 2017, 02:43:02 PM by SuperDerpBro |
|
Well, 18 a day seem to HIGH! lol.. anything i can do to tweak this better? GPU 01 EVGA 1060 SC 6GB - Power limit 80% - Micron - +145 GPU +530 Mem GPU 02 PNY 1060 6GB - Power limit 80% - Samsung - +145 GPU +666 Mem GPU 03 EVGA 1060 SC 6GB - Power limit 80% - Hynix - +145 GPU +500 Mem GPU 04 EVGA 1060 SC 6GB - Power limit 80% - Hynix - +145 GPU +500 Mem ---- setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog" Thanks for your time man
|
|
|
|
Atexor
Member
Offline
Activity: 155
Merit: 10
|
|
December 07, 2017, 02:01:56 PM |
|
I've problem to connect to that pool using excavator miner. I'm not getting even message like "Connecting to 1.24..4:5 (google.com)". Hashrate equals 0: https://i.imgur.com/Pkjno8C.pngI've added worked (even two, normal and hub) in config and then set port to: hub.miningpoolhub.com:20593 for MonaCoin or hub.miningpoolhub.com:20507 for Vertcoin. Mining at others pools works perfectly with excavator.
|
|
|
|
|
Atexor
Member
Offline
Activity: 155
Merit: 10
|
|
December 07, 2017, 02:27:53 PM |
|
'Thank you for your help. It's strange, especially excavator doesn't take any fee (probably as NiceHash wrote). Also if may I ask - I've seen multiple multi-algo switcher, hovewer no one of them allowed to change GPU overclock whiles witching to other algorithm. Running GPU at default clocks is waste of energy and power. Is there any way to do it? Execute additional .bat on algo switchiung, which runs specific nvidiainspector profile-settings file?
|
|
|
|
aaronsace
|
|
December 07, 2017, 02:56:43 PM |
|
'Thank you for your help. It's strange, especially excavator doesn't take any fee (probably as NiceHash wrote). Also if may I ask - I've seen multiple multi-algo switcher, hovewer no one of them allowed to change GPU overclock whiles witching to other algorithm. Running GPU at default clocks is waste of energy and power. Is there any way to do it? Execute additional .bat on algo switchiung, which runs specific nvidiainspector profile-settings file? MultiPoolMiner does not yet support it directly but all the miner files are fully customizable so you can added all the settings you want for Excavator (and/or other miners like Claymore): https://github.com/aaronsace/MultiPoolMiner/blob/f4c1a6cb77aacdb42eb587eae47ed508a176389a/Miners/ExcavatorNvidia2.ps1#L8-L17
|
|
|
|
Christopher761
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 07, 2017, 03:14:16 PM |
|
I've problem to connect to that pool using excavator miner. I'm not getting even message like "Connecting to 1.24..4:5 (google.com)". Hashrate equals 0: https://i.imgur.com/Pkjno8C.pngI've added worked (even two, normal and hub) in config and then set port to: hub.miningpoolhub.com:20593 for MonaCoin or hub.miningpoolhub.com:20507 for Vertcoin. Mining at others pools works perfectly with excavator. @Atexor: I guess you haven't been reading any news. But Nicehash was hacked. All their BTC is gone. I am not going to hold my breath about getting any of my money back either. See the news statement at www.nicehash.com
|
|
|
|
SuperDerpBro
|
|
December 07, 2017, 03:22:39 PM |
|
I lost the first 175 towards the ROI of my new (First) rig. Every cent it made since i turned it on Like a day before payout to external FML
|
|
|
|
Christopher761
Newbie
Offline
Activity: 16
Merit: 0
|
|
December 07, 2017, 03:27:43 PM |
|
@Aaronsace:
I have removed the pool nicehash from my startup scripts. But one machine gives an error about Warning: Pool Api (Nicehash) has failed.
Is that for setting prices?
Is it something to worry about?
|
|
|
|
SuperDerpBro
|
|
December 07, 2017, 03:33:11 PM |
|
I see that as well.. Was wondering the same
anyone know if there is anything i can do to tweak this better?
GPU 01 EVGA 1060 SC 6GB - Power limit 80% - Micron - +145 GPU +530 Mem GPU 02 PNY 1060 6GB - Power limit 80% - Samsung - +145 GPU +666 Mem GPU 03 EVGA 1060 SC 6GB - Power limit 80% - Hynix - +145 GPU +500 Mem GPU 04 EVGA 1060 SC 6GB - Power limit 80% - Hynix - +145 GPU +500 Mem
----
setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog"
|
|
|
|
aaronsace
|
|
December 07, 2017, 03:37:56 PM Last edit: December 07, 2017, 03:55:05 PM by aaronsace |
|
@Aaronsace:
I have removed the pool nicehash from my startup scripts. But one machine gives an error about Warning: Pool Api (Nicehash) has failed.
Is that for setting prices?
Is it something to worry about?
To completely remove it, delete the file in the folder called 'pools'. It shouldn't be causing any issues though.
|
|
|
|
aaronsace
|
|
December 07, 2017, 03:39:03 PM |
|
I lost the first 175 towards the ROI of my new (First) rig. Every cent it made since i turned it on Like a day before payout to external FML Yep, they timed the hack well...
|
|
|
|
Tosti
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 07, 2017, 04:41:10 PM |
|
Hi there, any idea for this? I only changed the parameters for start.bat as shown in the screen. Nothing else was changed. http://prntscr.com/hkena7
|
|
|
|
Atexor
Member
Offline
Activity: 155
Merit: 10
|
|
December 07, 2017, 05:02:29 PM Last edit: December 07, 2017, 05:38:45 PM by Atexor |
|
I've problem to connect to that pool using excavator miner. I'm not getting even message like "Connecting to 1.24..4:5 (google.com)". Hashrate equals 0: https://i.imgur.com/Pkjno8C.pngI've added worked (even two, normal and hub) in config and then set port to: hub.miningpoolhub.com:20593 for MonaCoin or hub.miningpoolhub.com:20507 for Vertcoin. Mining at others pools works perfectly with excavator. @Atexor: I guess you haven't been reading any news. But Nicehash was hacked. All their BTC is gone. I am not going to hold my breath about getting any of my money back either. See the news statement at www.nicehash.comI saw that, hovewer I don't use nicehash tool. Just their miner Excavator but it has nothing to it because I don't earn BTC which was stolen but crypro which I want. 'Thank you for your help. It's strange, especially excavator doesn't take any fee (probably as NiceHash wrote). Also if may I ask - I've seen multiple multi-algo switcher, hovewer no one of them allowed to change GPU overclock whiles witching to other algorithm. Running GPU at default clocks is waste of energy and power. Is there any way to do it? Execute additional .bat on algo switchiung, which runs specific nvidiainspector profile-settings file? MultiPoolMiner does not yet support it directly but all the miner files are fully customizable so you can added all the settings you want for Excavator (and/or other miners like Claymore): https://github.com/aaronsace/MultiPoolMiner/blob/f4c1a6cb77aacdb42eb587eae47ed508a176389a/Miners/ExcavatorNvidia2.ps1#L8-L17Currently I'm trying to configure your tool, but it works a bit strange. At the beginning I'd moved excavator to Bin\excavator. Then I modified start.bat: setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username AAA -workername BBB -ssl -region europe -currency btc,usd -type nvidia -poolname miningpoolhub -donate 5 -algorithm Lyra2RE2" pause The run start.bat. A t the beginning it shown me nicehash errors (even I don't use it, is it trying to connect to nicehash even that, yes?) and then run excavator with my config. Nice functionality to search for them in excavator folder (I had few configs with custom names). But then it downloaded ccminer and constantly and very often was switching between excavator and ccminer and... excavator and excavator (lol?). Should I change something more like multipoolminer.ps1? By the way - do not hold it against me - to my mind manual-readme on github is a bit... unclear how to set up your tool. And about OC in excavator - I don't see a possiblity to set there OC in normally way. Do you mean changing path to bat file (which will run excavator + nvidiainspectorprofile) instead of excavator.exe? On file ExcavatorNvidia2.ps1 which you mentioned o github? Also why there are so many configs? Which of them to use? Excavator2.ps1 Excavator3.ps1 ExcavatorNvidia2.ps1 ExcavatorNvidia3.ps1 Thanks again!
|
|
|
|
aaronsace
|
|
December 07, 2017, 05:07:30 PM |
|
Hi there, any idea for this? I only changed the parameters for start.bat as shown in the screen. Nothing else was changed. You need access to the registry; your account appears to not have access. Remove FiceIce from the folder called 'miners' or fix the account permissions problem. BTW, it is a temporarily fix for the current FireIce version and the next release that they upload will not need registry access. https://github.com/fireice-uk/xmr-stak/issues/150
|
|
|
|
|
GillyTheGhillie
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 07, 2017, 06:12:09 PM |
|
I have two feature requests:
On the "Balances" screen, could we get an approximate exchange rate of the current coins in the wallets to USD or BTC (or whatever coin we have set as autoexchange)?
Would it be possible to have a "unified" dashboard that shows all coins that you are currently mining, similar to zpool's?
|
|
|
|
craigh
Member
Offline
Activity: 159
Merit: 10
|
|
December 07, 2017, 06:34:10 PM |
|
Hi MiningPoolHub -
Could you please check again the Auto Switch for the Baikal X10? I know you already changed the weighting for Skein as the X10 runs a 5GH/s on that algo, but to me it still looks like DigiByte-Skein is being selected when not the most profitable.
Thanks
C.
|
|
|
|
|