[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[aaronsace]

Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!

[
   {"time":0,"commands":[
      {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
   ]},
   {"time":3,"commands":[
      {"id":1,"method":"worker.add","params":["0","0"]}
   ]},
   {"time":10,"loop":10,"commands":[
      {"id":1,"method":"worker.print.speed","params":["0"]},
      {"id":1,"method":"algorithm.print.speeds","params":["0"]}
   ]}

NiceHash blocked MiningPoolHub; MultiPoolMiner works with Excavator miner and can bypass the block.

[Little Miner]

hi,
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx

For example I doing mine on MonaCoin and VertCoin, you must see the MonaCoin --> Workers and yourname must be Orange for active and you can see the hashrate and also you can select MonaCoin --> Pool and must find yourname in the Contributor Hashrates.

[fonyo]

Nothing I have tried has enabled me to mine on miningpoolhub.

I've tried Awesome miner. NO dice.

Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.

Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.


So what does one do to make miningpoolhub work?

MiningPoolHub is a pool not a miner. There are zero problems with MiningPoolHub.

All miners connect to pools via a stratum connection protocol.

MiningPoolHub requires to use a username, not a BTC address. The -address command (in start.bat of) MultiPoolMiner is irrelevant when using miningpoolhub as your primary pool. Make sure you include your MiningPoolHub username!

[Stefek_K]

Guys I've made some calculations and my actual profits (3 day span) are pretty much 62% of what they should be if I were receiving the amount displayed by the miner when mining. The profits are also lower than what whattomine suggests and more in line with what I've been profiting when using Nicehash (pretty much the same $$$ per day as with nicehash a week ago, when it was still working). I've seen ~60% mentioned here before, so that's definitively another case of that.

I'm using aaronsace's miner. Multi algo + Auto exchange to BTC.

For some reason I'm also pretty much mining ZCoin 90% of the time, despite it not being a top algorithm on the mining hub page at a given time, losing to VTC, Mona and some others.

I'm pretty confused. Either there's something messed up, or I messed up. i wish someone could help me with this.

I'm switching to WinMiner for the time being, I can't seem to be able to figure this out. I love the idea of miningpoolhub but losing ~35% profits is too much.

[Cryptographertm]

well guys, cant say I recommend the auto exchange feature.

My coins have been sitting on the "exchange" for 2 days now (2017-12-10 22:18:16 (UTC) <-- time it hit the exchange

I dont know what exchange its on, or what priority MPH has to send it back.

Since its been there, the coin i was auto exchanging to has lost 25% value. I picked a coin that has extremely fast transfer times and very cheap tx fees <0.001 USD.

I wont be using the auto exchange feature anymore as  you will need to be able to predict altcoin prices >48 hours in advance.

I cant imagine how long a coin with a congested network would take.

[Gongolo]

well guys, cant say I recommend the auto exchange feature.

My coins have been sitting on the "exchange" for 2 days now (2017-12-10 22:18:16 (UTC) <-- time it hit the exchange

I dont know what exchange its on, or what priority MPH has to send it back.

Since its been there, the coin i was auto exchanging to has lost 25% value. I picked a coin that has extremely fast transfer times and very cheap tx fees <0.001 USD.

I wont be using the auto exchange feature anymore as  you will need to be able to predict altcoin prices >48 hours in advance.

I cant imagine how long a coin with a congested network would take.

IMHO, autoexchange (with or without multialgo switch) is the easy and confortable way: you just point your rig to MPH and just wait.
But it could also be not the more profitable way.
IMHO, best and more profitable way is still mining coins directly, with autoexchange off.
Then, you can hold those coins if you bet on long term profit or you can move them to bittrex/cryptopia/etc.. and change them to your favourite coin.
If you move them to bittrex, you have also the chance to sell your mined coins when you like, maybe later at a higher value or immediately if you feel that coin is going to sink.
Yes, this is the harder way and you have to invest more time, but IMHO it is the most profitable.
This is my 2 cents.. ehm, satoshis. 

[Cryptographertm]

Well when you are making a buck a day, you either auto exchange to a coin with cheap tx fees. or you have to wait weeks for it to be worth it to pay for the withdraw for something lke eth btc or ltc.

With my GPU I have few options of coins to mine, and none of them have reasonable enough withdraw fees that I can withdraw everyday, or even every otherday. And I dont want to leave them on a website where i dont have the priv key for long.

So either auto exchange doesnt take a week, or ill have to look somewhere else for a better solution.

thanks for the reply.

[Drennoga]

Hey There, question if anyone can answer. 
When a BLOCK is found on your pool"Miningpoolhub" which is the pool I use to mine Zcoin. How can you tell how much $ you are receiving when a block is found. Can you calculate how much $ from the number listed on the right side of your hash power? By the way some times the numbers are zeros. Correct me if i'm wrong, but I think that is when a block has been found?. Here is an example when they are not zeros.

XZC Estimates
Block   0.00370460
Fees   0.00003334
Donation   0.00000000
Payout   0.00367126

How much am I receiving per/block found? is it 0.00367 of a dollar? is it 0.00367 of 1 Zcoin? is it 0.00367 of the 40 Zcoin?
How can I tell how much I received in a 24-hour period of blocks being found for Zcoin? Its hard to tell the difference of what I mined/received from blocks found if this is the case in a 1 hour period or 24 hour period. In the Unconfirmed for Auto Exchange it is all bundled up so I cannot tell what I personally mined from the miner only. Is there a way to look up what I mined/received with out them being together?

I looked at the Graph hash-rate of my miner, and I see my highest point my miner's hash-rate,  and also the mid range hash-rate. I still cannot get a good accurate average of my hash power during the hours. Is there something I can do that can give me numbers on the graphs to get accurate average #reading of my hash-rate over a 1hour/3hour/6hour/24hour period?

Don't mean to complain. Just looking for answers/help.
Thanks to everyone in advance for helping me/answering my questions in advance.
Cheers*

[yurasic park]

In general, the pool is unclean. In particular, this applies to ZCOin. Where does it go about 20 percent? Can suffice to HUMBLE UP. You have not 0,9 percent, but 29 percent.

[alnash]

Hi,

Does Miningpoolhub.com have any public API to query current most profitable algo?

[crypper]

Hi,

Does Miningpoolhub.com have any public API to query current most profitable algo?

I'm not aware of MPH api, but WhatToMine has JSON. BTW there is a huge difference between what MPH and WTM think is "most profitable" coin/algo.

[Cryptographertm]

Hi,

Does Miningpoolhub.com have any public API to query current most profitable algo?

I'm not aware of MPH api, but WhatToMine has JSON. BTW there is a huge difference between what MPH and WTM think is "most profitable" coin/algo.

Did the MPH owner ever address this discrepancy? Surely that big of a difference cant all be attributed to lag right

[mxl86]

Hey everyone,

Does anyone know how we can prevent MultiPoolMiner from downloading/benchmarking *some* miner. I can't seems to finish the benchmarking for Equihash, it always crash at some miner near the end while I could use the 2 first that worked great.

Thank you.

[freofreo]

Hey everyone,

Does anyone know how we can prevent MultiPoolMiner from downloading/benchmarking *some* miner. I can't seems to finish the benchmarking for Equihash, it always crash at some miner near the end while I could use the 2 first that worked great.

Thank you.

Remove those miner's .ps1 or .txt files from \Miners folder. Then start MPM again. (don't forget to make backup too, you might need them later).

[wizmanza]

In general, the pool is unclean. In particular, this applies to ZCOin. Where does it go about 20 percent? Can suffice to HUMBLE UP. You have not 0,9 percent, but 29 percent.

Is this factual or timing of pool showing hash rate?

[crypper]

CCminer Lyra2Rev2 hashrate issue

OK, guys. So I've seen many posts here re: hash rate reported by pool is 10-40% lower than reported by miner. I personally noticed 25% discrepancy while mining vertcoin a few days ago. Admins suggested (see a few pages back) the issue was limited to Lyra2Rev2 and was most likely miner's fault rather than pool's problem.
The table below summarises the results of my test. So if you choose to mine Lyra2Rev2 coins be prepared to have lower revenues than predicted.

GPU                                               2x GTX 1070                                          2x GTX 1070
clocks                                      +150,+500, 70%                                   +150,+500, 70%
driver                                              372.54                                                      372.54
miner                                          Ccminer 2.2                                                    Ccminer 2.2
pool                                                          MPH                                                        Suprnova
coin / algo                                       Monacoin / Lyra2Rev2                            Monacoin / Lyra2Rev2
mining time, h                                           24                                                           24
Hashrate from miner, MH/s                         68.7                                                            68
Average hashrate from pool, MH/s         ~58                                                            ~58
Total shares / invalid shares                    5610 / 1                                                 5158 / 0
Predicted revenue (Whattomine), Mona      0.42                                                            0.42
Actual revenue, Mona                                  0.36                                                     0.34



Question to admins: since you are aware of the problem, why not make it clear on the website (just make a note)? Lyra2Rev2 coins are the most profitable at the moment and people on autoswitch will probably mine those vertcoins and monacoins expecting the highest yield while mining lower profitability coins (e.g. equihash zencash or BTG) may in fact be more profitable (given those algos do not have the same problem as Lyra, that I'm going to test today).

[Temporel]

Hi all,

how do I see the dashboard for ethash algo switching ?

EDIT: Found it, we have to look at what the pool choose for ethash and then look for that coin/token dasboard.

[razorseal]

Hey guys, I had some requests on reddit (well I asked if anyone would be interested lol) for making a tutorial on how to use miningpoolhub using multipoolminer... It took me all of last night to make this hour long tutorial that should get you started from creating your account on miningpoolhub to setting up multipoolminer and depositing it to your account/wallet of choice. Here is the video...

https://youtu.be/Ee7hiSTnZa0

If anyone would like to buy me some coffee (or a ferrari if I keep it for few years lol) my donation links are here -

I hope this will help you guys if anyone is having any trouble setting it up. this is a monkey see monkey do style tutorial. Just follow along and you should be making money in no time. I plan to make some more videos soon as I learn more about how this all works. I'm fairly new myself...

BTC - 13UtW3vN4DKmmjV45dL5LHwcV8svu9tuzz
ETH - 0x260fAdC32972ca102C5CA3fAF3996C609C6C0311
LTC - Lh2DiirhVhFdX9VwWS5cY9dxyRGKV9JDGs

Perhaps make this a sticky (or copy paste into main post) to people can see this in the original post.

[poby]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

Video with old standard miner and older driver.

As you can see with
PL 100
GPU 100
RAM 770
hashrate never goes above 287MHs

Right now with latest drivers and 2-2fork miner and
PL 95
GPU 100
RAM 700
I got 353MHs.

Think about it.

I tried this and it seems to be correct!  Of course windows flags the file as a virus so you need to set an exclusion which is a bit risky, but I can confirm that using the latest driver and this ccminer fork, does increase lyra2re2 hashrates by around 20% and the rate displayed in MPH is within 10% of the cli miner rate.

It's a bit risky and I can't vouch for the long term stability since I was only mining that algo for an hour or so.

gtx 1070 +120/+650 pl 65%

[crypper]

I tried this and it seems to be correct!  Of course windows flags the file as a virus so you need to set an exclusion which is a bit risky, but I can confirm that using the latest driver and this ccminer fork, does increase lyra2re2 hashrates by around 20% and the rate displayed in MPH is within 10% of the cli miner rate.

It's a bit risky and I can't vouch for the long term stability since I was only mining that algo for an hour or so.

gtx 1070 +120/+650 pl 65%


[/quote]

You are a one brave man. Can't find that fork on github.