[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[craigh]

Hi MiningPoolHub -

Could you please check again the Auto Switch for the Baikal X10? I know you already changed the weighting for Skein as the X10 runs a 5GH/s on that algo, but to me it still looks like DigiByte-Skein is being selected when not the most profitable.

Thanks

C.

[1715113063]

1715113063

[1715113063]

1715113063

[1715113063]

1715113063

[Atexor]

aaronsace - could you help me with that switching miners all the time, which I had mentioned there? I'm looking for that answer but without success. Only x instances of miner at the same time but it's not the thing that I need.
Deleted others files. I'm idiot.

But still there is one thing - why there are few excavators configs?
Also - is there possibility to run it in a background (--quiet) without taskbar?

[aaronsace]

aaronsace - could you help me with that switching miners all the time, which I had mentioned there? I'm looking for that answer but without success. Only x instances of miner at the same time but it's not the thing that I need.
Deleted others files. I'm idiot.

But still there is one thing - why there are few excavators configs?
Also - is there possibility to run it in a background (--quiet) without taskbar?

What's wrong with just minimizing it?

[Atexor]

aaronsace - could you help me with that switching miners all the time, which I had mentioned there? I'm looking for that answer but without success. Only x instances of miner at the same time but it's not the thing that I need.
Deleted others files. I'm idiot.

But still there is one thing - why there are few excavators configs?
Also - is there possibility to run it in a background (--quiet) without taskbar?

What's wrong with just minimizing it?

I know that it may sounds stupid, hovewer I'm using my miner pc as normal pc (on iGPU) and always have many programs on taskbar. Lack of free space.


I noticed that your tool prefers to mine Monacoin, while I checked on whattomine that Vertcoin (the same algorithm) is almost 1.4x more profitable. Why it doesn't mine it seeing that Miining Pool hub supports it?
   

[aaronsace]

aaronsace - could you help me with that switching miners all the time, which I had mentioned there? I'm looking for that answer but without success. Only x instances of miner at the same time but it's not the thing that I need.
Deleted others files. I'm idiot.

But still there is one thing - why there are few excavators configs?
Also - is there possibility to run it in a background (--quiet) without taskbar?

What's wrong with just minimizing it?

I know that it my sounds stupid, hovewer I'm using my miner pc as normal pc (on iGPU) and always have many programs on taskbar. Lack of free space.


I noticed that your tool prefers to mine Monacoin, while I checked on whattomine that Vertcoin (the same algorithm) is almost 1.4x more profitable. Why it doesn't mine it seeing that Miining Pool hub supports it?
   

Try:

-windowstyle hidden

MiningPoolHub switches between the two coins correctly.

[l33twannabe]

I don't think MultiPoolMiner is giving me accurate calculations about earnings.

Code:

MultiPoolMiner                          0,00053 ±14% (0,00046-0,00060) 8,51092 ±14% (7,48330-9,67965)
{Dstm-Equihash, FireiceCpu-CryptoNight} 0,00048 ±14% (0,00042-0,00055) 7,77000 ±14% (6,81348-8,86081)

So it says I'm getting about 0,00053BTC/day (or ~8USD/day), but here's what profitability section says:

Code:

Dstm                   Equihash                               724,84  H/s            0,00027          375,66025 MiningPoolHub-BitcoinGold
XmrigCpu                CryptoNight 318,54  H/s 0,00005  161,10816 MiningPoolHubCoins-Monero

0,00027BTC + 0,00005BTC = 0,00032BTC. Where does 0,00053BTC come from then ? Also, MPM doesn't even choose the most profitable algo (CcminerLyra2z          Lyra2z                                   2,97 MH/s            0,00035            0,11796 MiningPoolHub-Zcoin).

So I don't even know what I'm getting at the moment and if it's profitable. That's one of the things I liked about NiceHash.

Any ideas what's going on here ? Either something is wrong or I just can't read it properly.

[aaronsace]

I don't think MultiPoolMiner is giving me accurate calculations about earnings.

Code:

MultiPoolMiner                          0,00053 ±14% (0,00046-0,00060) 8,51092 ±14% (7,48330-9,67965)
{Dstm-Equihash, FireiceCpu-CryptoNight} 0,00048 ±14% (0,00042-0,00055) 7,77000 ±14% (6,81348-8,86081)

So it says I'm getting about 0,00053BTC/day (or ~8USD/day), but here's what profitability section says:

Code:

Dstm                   Equihash                               724,84  H/s            0,00027          375,66025 MiningPoolHub-BitcoinGold
XmrigCpu                CryptoNight 318,54  H/s 0,00005  161,10816 MiningPoolHubCoins-Monero

0,00027BTC + 0,00005BTC = 0,00032BTC. Where does 0,00053BTC come from then ? Also, MPM doesn't even choose the most profitable algo (CcminerLyra2z          Lyra2z                                   2,97 MH/s            0,00035            0,11796 MiningPoolHub-Zcoin).

So I don't even know what I'm getting at the moment and if it's profitable. That's one of the things I liked about NiceHash.

Any ideas what's going on here ? Either something is wrong or I just can't read it properly.

If you can't work it out, just ignore everything and look at the one figure:
0.00053 BTC/Day

[Tosti]

Been mining for some time, still nothing on my mining pool hub. Then I checked the files from MPM and found that he's mining for you? My mona balance after mining is still 0?
http://prntscr.com/hkhs9p

Need some answers, in the readme it's stated that I only have to change the values from start.bat, not every possible file?

edit: Again, might not be much, but why does it start with your imputs?
http://prntscr.com/hkjibk

Tried with donate 0/10(the value I wanted to give yo tou for your hard work), but I suppose it's not worth giving you 10 since you're already taking probably more than this.

[Atexor]

Try:

-windowstyle hidden

MiningPoolHub switches between the two coins correctly.

It launched in the background, miner runs, but except that I'm getting windows with powershell errors.

MiningPoolHub switches between the two coins correctly.

So it's a bit strange that miner prefers MonaCoin all the time, especially the current difficulty says that vertcoin is more profitable.

edit: I see Miningpoolhub rank and there MonaCoin wins. Strange because that's a big difference between ti and WTM.

[Justwondering]

If I sign up and use awesome miner software.

Will It all be pretty much automated due to using awesome miner software or will I need to add settings for coins etc?

Also 2nd question will I just need a BTC wallet for payment?

[aaronsace]

Been mining for some time, still nothing on my mining pool hub. Then I checked the files from MPM and found that he's mining for you? My mona balance after mining is still 0?
http://prntscr.com/hkhs9p

Need some answers, in the readme it's stated that I only have to change the values from start.bat, not every possible file?

edit: Again, might not be much, but why does it start with your imputs?
http://prntscr.com/hkjibk

Tried with donate 0/10(the value I wanted to give yo tou for your hard work), but I suppose it's not worth giving you 10 since you're already taking probably more than this.

The donation is set to 10 minutes per day. You have actually highlighted a bug where I will most likely end up with no donation when using Excavator; I'll push a fix.

[Btcv11]

I have two feature requests:

On the "Balances" screen, could we get an approximate exchange rate of the current coins in the wallets to USD or BTC (or whatever coin we have set as autoexchange)?

Would it be possible to have a "unified" dashboard that shows all coins that you are currently mining, similar to zpool's?

I second this request, it would be easier to keep track of the earnings this way.

[aaronsace]

I have two feature requests:

On the "Balances" screen, could we get an approximate exchange rate of the current coins in the wallets to USD or BTC (or whatever coin we have set as autoexchange)?

Would it be possible to have a "unified" dashboard that shows all coins that you are currently mining, similar to zpool's?

I second this request, it would be easier to keep track of the earnings this way.

It's been suggested before; I do hope one day that it will happen but MiningPoolHub is very busy so it's unlikely to happen anytime soon.

[BitBot.V2]

Miningpoolhub can have a 30 minute cache for profitability. What to mine has upto a 3 minute cache. Honestly both of these are extremely long as the coin can and often does double or half its difficulty within a matter of a minute or two. In other words, the two sites are showing profitability from different times, and both are likely wrong for the current block. You can just pull the difficulty data of the blockchain and put it in a calculator or do the calc yourself, that wont help for switching but at least youll know the difficulty of the current block!

Try:

-windowstyle hidden

MiningPoolHub switches between the two coins correctly.

It launched in the background, miner runs, but except that I'm getting windows with powershell errors.

MiningPoolHub switches between the two coins correctly.

So it's a bit strange that miner prefers MonaCoin all the time, especially the current difficulty says that vertcoin is more profitable.

edit: I see Miningpoolhub rank and there MonaCoin wins. Strange because that's a big difference between ti and WTM.

[JohnnyDoeTheSecond]

Nothing I have tried has enabled me to mine on miningpoolhub.

I've tried Awesome miner. NO dice.

Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.

Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.


So what does one do to make miningpoolhub work?

[Justwondering]

Nothing I have tried has enabled me to mine on miningpoolhub.

I've tried Awesome miner. NO dice.

Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.

Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.


So what does one do to make miningpoolhub work?

I have awesome miner working with zpool, works well with Nvidia 1080ti, but does not seem optimised for AMD cards on zpool, but I am too a ex nicehash lazy miner looking for the latest lazy method.

I doubt nicehash will be coming back anytime soon... Sadly..

[aaronsace]

Nothing I have tried has enabled me to mine on miningpoolhub.

I've tried Awesome miner. NO dice.

Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.

Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.


So what does one do to make miningpoolhub work?

MiningPoolHub is a pool not a miner. There are zero problems with MiningPoolHub.

All miners connect to pools via a stratum connection protocol.

[Spiffy_1]

Both multipoolminer and nemosminer work fine.  It can be as simple as no space after your btc address(found that out) before the "-".  That goes for all the arguements in the batch file.

[Zand_]

Anyone else unable to access the Antpool dashboard? I keep getting "HTTP Status 403 - Ticket not recognized" when I try to login.

[mistcane]

Using Awesome Miner and everything was fine when I originally started it. After about an hour I rebooted and now get "stratum extranonce answer id was not correct" when trying to start it and it hangs up. When I uncheck the Mining Pool Hub option under Profile Switching and start, it works just fine. My hub worker still has the same username and password, nothing has changed other than a reboot.

Any ideas why it won't connect now? Thanks for the help

Edit: Disabling Blake 2b under Algorithms fixed it.