CryptoDredge 0.27.0 — CUDA Miner

[gusknure]

 djm34 1.1.10 version less hashrate, but more stable.

[1715136354]

1715136354

[1715136354]

1715136354

[1715136354]

1715136354

[Dr_Victor]

My rig freezes in 3-5 minutes. Win 10, CUDA 10, 6x gtx 1080 ti, w/o o/c.

[rottongg]

My rig freezes in 3-5 minutes. Win 10, CUDA 10, 6x gtx 1080 ti, w/o o/c.

mine is Win 10 x64, CUDA 10, 8x gtx 1080 ti drivers Version: 417.35 (previous version worked fine, no bugs)

HOW much memory do you have in your rig ?

mine is 2x4gb dual mode

how much virtual memory ?

mine is
custom size for c:
initial size 25000 MB
maximum size 40000 MB
plus
custom size for d:
initial size 10000 MB
maximum size 15000 MB

currently allocated 40185 MB

(pagefile.sys on c: = 30909 MB , pagefile.sys on d: 10240 MB )

check chip set drivers.

what is your motherboard? name model?

what is your power supply model and how much psu is installed  in your rig?

[rottongg]

also (IMHO) body of rig should be aluminium

when my first rig was from wood it was always crashes, freezes  , etc. BLU SCREEN ) with bug check code 0x00000113  you can see errors in BlueScreenView.exe mini-dump should be enabled in windows settings (default setting - enabled)

[_SPARTANEC_]

MTP Algo after about hour of work, miner is working, but there is no hash rate on pool. After reboot miner the same problem again.

[rottongg]

MTP Algo after about hour of work, miner is working, but there is no hash rate on pool. After reboot miner the same problem again.

you must see your worker in a few minutes, usually it takes less than a minute. if not- check your config file or .bat file

CryptoDredge.exe -a mtp -o stratum+tcp://xzc.2miners.com:8080 -u zcoinwalletnumber.rig1 -p x

[_SPARTANEC_]

MTP Algo after about hour of work, miner is working, but there is no hash rate on pool. After reboot miner the same problem again.

you must see your worker in a few minutes, usually it takes less than a minute. if not- check your config file or .bat file

CryptoDredge.exe -a mtp -o stratum+tcp://xzc.2miners.com:8080 -u zcoinwalletnumber.rig1 -p x

This problem after update to 0.16.0 version, then start mining, everything okey and pool see my worker. But about after hour of work pool show zero hashrate, but if look to miner its work and shares accepting in progress, possible its didnt switch from fee pool. (Win 10, 1070x6, CryptoDredge 0.16.0, mintpond pool)

[oceanone]

same thing with my gtx 1070 and gtx 1070 ti rigs all hang after average of 1-2 hours. raven runs over 12 days without any reboot with overclock setting.

so mtp still not stable at all

[valsens]

......lyra2rev3 its not  connecting to p2pool says "not authorized"

[Mr.Spider703]

......lyra2rev3 its not  connecting to p2pool

Maybe wrong command line?

[valsens]

its the same like ccminer( this works)

[ekiller]

Hi  CryptoDredge,


Why your miner  trying to connect  here   https://static.54.58.40.188.clients.your-server.de/login      

on TCP  port:  50443

And this  IP address

188.40.58.54

[CinErik]

Hi  CryptoDredge,


Why your miner  trying to connect  here   https://static.54.58.40.188.clients.your-server.de/login      

on TCP  port:  50443

And this  IP address

188.40.58.54

Good question.

[haliy-2017]

How to view statistics through the browser? What should I register in the batch file and in the browser to view it?

[jugger1028]

MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...

[joseph32]

MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...

Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.

Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.

[cirlama]

MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...

Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.

Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.

to reduce the rejects, change to fix diff, d=512 or d=1024
(but CD is still unstable on 1080ti, while stable on 1070)

[kimtaek]

CryptoDredge is a simple in use and highly optimized cryptocurrency mining software. It takes full advantage of modern NVIDIA graphics cards through the use of unique optimization techniques.

Is this using only the NVIDIA video cards? Any type of NVIDIA video cards will support the mining or what is the best or recommended video card will be used for mining? thanks...

[joseph32]

MTP algo is incredibly unstable.. You're going to put an algo out there with lots of bugs and then charge 2%? Come on bruh...

Open Afterburner or similar and check why your rig is unstable. Very easy to address... CD is running smooth without any problems.

Only the 5% rejected rate is a little bit arrrgh, but I thing CD will work this out.

to reduce the rejects, change to fix diff, d=512 or d=1024
(but CD is still unstable on 1080ti, while stable on 1070)

Rejected depends on pool, even with or without fixed diff. MintPond = 0%, 2Miners = 5%

[haliy-2017]

v0.16.0 released

• Add X16RT algorithm
• Add Lyra2zz (LAPO) algorithm
• Stabilize MTP algorithm
• Other minor fixes

Download
Mirror

Happy mining!
The CryptoDredge Team 👾

How to view statistics through the browser? What should I register in the batch file and in the browser to view it?