[ANN][XMY] Myriad | Multi-Algo, Fair, Secure

[frostminer]

Hmmm, im mindblown by why i cant get my solomining working with this..


Miners get "slow/down or URL or credentials invalid"

[01:36:34] Pool: 0  URL: http://10.0.0.1:10889  User: user  Password: pass
[01:36:34] Pool: 1  URL: http://10.0.0.9:10889  User: user Password: pass
[01:36:34] Press any key to exit, or sgminer will try again in 15s.
[01:36:49] 10.0.0.1 slow/down or URL or credentials invalid
[01:36:49] 10.0.0.9 slow/down or URL or credentials invalid
[01:36:49] No servers were found that could be used to get work from.


Even though ive tried everything from default user/pass to custom and ports.
Have tried 2 servers.. same behaviour.
Firewalls off

conf:

server=1
listen=1
daemon=1
rpcuser=user
rpcpassword=pass
rpcallowip=10.0.0.22  (my testminer)
rpcport=10889
algo=skein




Any suggestions?

[1714110327]

1714110327

[1714110327]

1714110327

[1714110327]

1714110327

[1714110327]

1714110327

[jwinterm]

Hmmm, im mindblown by why i cant get my solomining working with this..
...

Any suggestions?

You can't solo mine with regular sg/cgminer with new Bitcoin codebase. They don't have getwork, I think, only getblocktemplate. Either you need to rework sg/cgminer and recompile to work with getblocktemplate, or just use p2pool, which if you run your own node is basically the same as solomining (plus it makes it easier to mergemine unitus).

[ph4nt0m]

Welcome digitrolls. Thanks for bumping the thread. Please continue blathering until your fit of trollepilepsy has subsided

Sorry mate, Danslip is one of your supporters, he constantly trolls the Digibyte thread along with your other embarrassment, Myraidcoins.

Most of the Digibyte community don't want this sort of rubbish to dribble into either of the coins threads.

Myriad coin has done a great job with this latest upgrade and I look forward to watching it develop more in the future.

Its an exciting time to see lots of the older coins continue to innovate and develop.

All I am saying is digibyte is able to market the innovation they copy from other coins. New users to crypto will assume digibyte was the creator of Multi Algo.

Myriad devs have helped digibyte in the past, this is no secret.

Jared doesn't copy. He pays to get something copied. Not sure if he can code really. His Github commits look like newbie work.

[frostminer]

Hmmm, im mindblown by why i cant get my solomining working with this..
...

Any suggestions?

You can't solo mine with regular sg/cgminer with new Bitcoin codebase. They don't have getwork, I think, only getblocktemplate. Either you need to rework sg/cgminer and recompile to work with getblocktemplate, or just use p2pool, which if you run your own node is basically the same as solomining (plus it makes it easier to mergemine unitus).

Im having the same problems with both CGminer and SGMiner

Both works nicely vs pool.

edit:
I feel like blaming the wallet. But the ports are reported to be listening.

wtf.

[jwinterm]

Hmmm, im mindblown by why i cant get my solomining working with this..
...

Any suggestions?

You can't solo mine with regular sg/cgminer with new Bitcoin codebase. They don't have getwork, I think, only getblocktemplate. Either you need to rework sg/cgminer and recompile to work with getblocktemplate, or just use p2pool, which if you run your own node is basically the same as solomining (plus it makes it easier to mergemine unitus).

Im having the same problems with both CGminer and SGMiner

Both works nicely vs pool.

edit:
I feel like blaming the wallet. But the ports are reported to be listening.

wtf.

That's what I said - it's the wallet. It uses a modern bitcoin codebase that does not contain getwork functionality, which most cg and sgminer programs require to function, instead it uses getblocktemplate, which most cg and sgminer programs don't support. A pool will work fine, which is why I recommended p2pool and running your own node. If you really want to make it work and directly solomine to the wallet you can see what groestlcoin did to fix sgminer to work with it:
https://github.com/GroestlCoin/sgminer
See latest commits, such as:
Fix for garbage byte at the end of coinbase sig, and fixed GBT solo mining on Windows.
and:
Super sloppy initial port of GBT solo support.
GBT = getblocktemplate

[frostminer]

Hmmm, im mindblown by why i cant get my solomining working with this..
...

Any suggestions?

You can't solo mine with regular sg/cgminer with new Bitcoin codebase. They don't have getwork, I think, only getblocktemplate. Either you need to rework sg/cgminer and recompile to work with getblocktemplate, or just use p2pool, which if you run your own node is basically the same as solomining (plus it makes it easier to mergemine unitus).

Im having the same problems with both CGminer and SGMiner

Both works nicely vs pool.

edit:
I feel like blaming the wallet. But the ports are reported to be listening.

wtf.

That's what I said - it's the wallet. It uses a modern bitcoin codebase that does not contain getwork functionality, which most cg and sgminer programs require to function, instead it uses getblocktemplate, which most cg and sgminer programs don't support. A pool will work fine, which is why I recommended p2pool and running your own node. If you really want to make it work and directly solomine to the wallet you can see what groestlcoin did to fix sgminer to work with it:
https://github.com/GroestlCoin/sgminer
See latest commits, such as:
Fix for garbage byte at the end of coinbase sig, and fixed GBT solo mining on Windows.
and:
Super sloppy initial port of GBT solo support.
GBT = getblocktemplate

Aha!
Thanks for info

[pekacoin]

when the hard fork will be updated?
how much time is left?

[MyriadAngel]

when the hard fork will be updated?
how much time is left?

http://myriad.nutty.one/home

Upcoming Hard Fork! Replace Qubit with Yescrypt fork occurring at block 1764000, in approximately 30 days, 5 hours, 12 minutes.
Update to version 0.11.3.1 - Please see https://redd.it/4rgidn

[IconFirm]

MYR falls need to sell

it's XMY actually - & I'll buy yours if you don't want them......

[myriadcoin]

Is it true that 8bitcoder is the second coming of Satoshi...

[IconFirm]

Latest version seems to have broken merge mining with p2pool - I've not had a single payment since upgrading it. I'll revert back to the older version to double check.

[jwinterm]

Latest version seems to have broken merge mining with p2pool - I've not had a single payment since upgrading it. I'll revert back to the older version to double check.

I noticed that I didn't get a unitus block for a few days but thought maybe it was just high unitus hashrate or bad luck. Please report if older version is working.

[IconFirm]

Latest version seems to have broken merge mining with p2pool - I've not had a single payment since upgrading it. I'll revert back to the older version to double check.

I noticed that I didn't get a unitus block for a few days but thought maybe it was just high unitus hashrate or bad luck. Please report if older version is working.

Will do, compiling 0.11.2 now......

[miningpoolhub]

Is there any way to reduce the CPU, memory usage from new version?

It consumes too much CPU at startup and eating more than 1GB of memory during running.
Do I have to tweak some numbers?

[IconFirm]

Latest version seems to have broken merge mining with p2pool - I've not had a single payment since upgrading it. I'll revert back to the older version to double check.

I noticed that I didn't get a unitus block for a few days but thought maybe it was just high unitus hashrate or bad luck. Please report if older version is working.

Will do, compiling 0.11.2 now......

Running 0.11.2 now, but I don't think it works either judging by the debug log, it looks the same as 0.11.3 ie no accepted blocks. Weather this is because there was a fork with 0.11.2 or simply because everyone else is using 0.11.3 I'm not sure.

I hope this isn't another case of updating a coin which breaks p2pool merge mining, which seems to be the trend lately - first NMC, then SYS, then ARG & now XMY. Soon there won't be any merge minable coins left to mine - even though they're all supposed to be......

[cryptapus]

Is there any way to reduce the CPU, memory usage from new version?

It consumes too much CPU at startup and eating more than 1GB of memory during running.
Do I have to tweak some numbers?

We have observed that CPU usage will be high until at least 8 nodes are connected. Once enough peers are found it seems to settle down. Memory use is high though, and I suspect that will be difficult to limit. You could try to set a ulimit on your daemon user and experiment though... Undoubtedly more work needs to be done on this front.

[IconFirm]

OK, this isn't good.

CPU = 20-25%
RAM = 1GB+
Merge mining broken.

I think I'll revert back to the older v9 client in order to get everything working again, as I'm seeing quite a few v9 clients still in use. Can someone tell me if I'll have to redownload the entire blockchain again - or can I use the one I'm using with v11?

Thanks.

[jwinterm]

OK, this isn't good.

CPU = 20-25%
RAM = 1GB+
Merge mining broken.

I think I'll revert back to the older v9 client in order to get everything working again, as I'm seeing quite a few v9 clients still in use. Can someone tell me if I'll have to redownload the entire blockchain again - or can I use the one I'm using with v11?

Thanks.

Might work now but I believe all v0.9.x clients are going to get forked off the network when new one activates.

[IconFirm]

OK, this isn't good.

CPU = 20-25%
RAM = 1GB+
Merge mining broken.

I think I'll revert back to the older v9 client in order to get everything working again, as I'm seeing quite a few v9 clients still in use. Can someone tell me if I'll have to redownload the entire blockchain again - or can I use the one I'm using with v11?

Thanks.

Might work now but I believe all v0.9.x clients are going to get forked off the network when new one activates.

When will that be - is it by consesus or block #?  I think the fork should be cancelled until these problems are ironed out tbh, forking the network will result in merged miners no longer being able to mine - meaning XMY losing most of its hash rate, won't it?

[cryptapus]

OK, this isn't good.

CPU = 20-25%
RAM = 1GB+
Merge mining broken.

I think I'll revert back to the older v9 client in order to get everything working again, as I'm seeing quite a few v9 clients still in use. Can someone tell me if I'll have to redownload the entire blockchain again - or can I use the one I'm using with v11?

Thanks.

I'm not sure merge mining is broken, see:

http://insight-myr.cryptap.us/block/1bc76704452bae595989f60527519abcd9a718af6627a29aebe913844c4535a3

This is a sha256d block, appears to be aux-pow, and a version 4 block. That should be on 0.11.3.1

The fork will be done via consensus, 75% v4 blocks after block 1764000. But v 0.9.x can be forked before that block, if 75% v4 consensus is met.

edit: I'm keeping some status here: https://cryptap.us/myr/myrstat

0.11.3.1 miners are v4 miners