Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini

[SilverDesert]

Thanks
Even with the latest fans with higher static pressures?
Any ideas how it can be done?

[efudd]

Personally, I’m not sure. I believe one of the cursed mining (YouTube videos) guys did a test with noctua and posted a video. That might be of some help... maybe search YouTube for antminer noctua? If you can’t find it, lemme know.

-j

[BasilKlyev]

2.3.1nh has been released for NiceHash users. This corrects an issue that prevented voltage controls from working properly in 2.3nh in some circumstances.

https://releases.broked.net/Z11_2.3.1nh.tar.gz

Thank you,

Jason

For Z9 support NH?

[efudd]

2.3.1nh has been released for NiceHash users. This corrects an issue that prevented voltage controls from working properly in 2.3nh in some circumstances.

https://releases.broked.net/Z11_2.3.1nh.tar.gz

Thank you,

Jason

For Z9 support NH?

not at this time.

-j

[efudd]

Z11  keeps  problems  on luxor  pool DEV fee looks going  instead  DEV free
45 min out from pool luxor,mining who know where!!!
Support ID: e847529c-7bb6-11e9-b4aa-f23c917c34c5

log:
Jun 20 09:13:33 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B31003373F
Jun 20 09:24:33 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 09:24:33 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D343900022F9
Jun 20 09:24:39 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666
Jun 20 09:24:40 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B310033B0A
Jun 20 09:35:39 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 09:35:39 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D3439000234D
Jun 20 14:15:52 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666
Jun 20 14:15:52 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B310039E06
Jun 20 14:26:52 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 14:26:52 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D34390002DBF
Jun 20 14:26:58 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666

In your configuration, do you have your pool defined as 'zec-eu.luxor.tech' or do you have it defined as 'stratum+tcp://zec-eu.luxor.tech' (the log file output always presents it with stratum+tcp:// regardless of how it is set in the pool configuration)?

-j

[SilverDesert]

Personally, I’m not sure. I believe one of the cursed mining (YouTube videos) guys did a test with noctua and posted a video. That might be of some help... maybe search YouTube for antminer noctua? If you can’t find it, lemme know.

-j

Thanks, I found the link.

https://steemit.com/z9mini/@cryptompminer/z9mini-modification-for-home

[efudd]

Z11  keeps  problems  on luxor  pool DEV fee looks going  instead  DEV free
45 min out from pool luxor,mining who know where!!!
Support ID: e847529c-7bb6-11e9-b4aa-f23c917c34c5

log:
Jun 20 09:13:33 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B31003373F
Jun 20 09:24:33 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 09:24:33 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D343900022F9
Jun 20 09:24:39 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666
Jun 20 09:24:40 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B310033B0A
Jun 20 09:35:39 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 09:35:39 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D3439000234D
Jun 20 14:15:52 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666
Jun 20 14:15:52 (none) local0.info cgminer[1002]: Pool 3 extranonce set to 88AE70B310039E06
Jun 20 14:26:52 (none) local0.warn cgminer[1002]: Switching to pool 0 stratum+tcp://zec-eu.luxor.tech:6666
Jun 20 14:26:52 (none) local0.info cgminer[1002]: Pool 0 extranonce set to F269D34390002DBF
Jun 20 14:26:58 (none) local0.warn cgminer[1002]: Switching to pool 3 stratum+tcp://pools.fudd.net:6666

In your configuration, do you have your pool defined as 'zec-eu.luxor.tech' or do you have it defined as 'stratum+tcp://zec-eu.luxor.tech' (the log file output always presents it with stratum+tcp:// regardless of how it is set in the pool configuration)?

-j

pool defined as 'zec-eu.luxor.tech

add stratum+tcp:// to the beginning please.. so stratum+tcp://zec-eu.luxor.tech:6666 -- I think that will resolve it.

Let me know.

-j

[chipless]

Now Available Z11 v2.0 Chipless Nitrous Private - Provides user frequency control, more voltage settings per frequency, improved performance and better power efficiency. Nicehash Support!!!

Also available Fusionsilicon X1 v4.22 unlocked freq and voltage full user control and S17 unlocked with full user controls.

NO accidental dev fee connections because thers is NO DEV FEE

PM for purchase details.

Limited public Nitrous v2.0 version will be available in the next couple of days.

Visit this thread for details

https://bitcointalk.org/index.php?topic=5132758

[efudd]

Now Available Z11 v2.0 Chipless Nitrous Private - Provides user frequency control, more voltage settings per frequency, improved performance and better power efficiency. Nicehash Support!!!

Also available Fusionsilicon X1 v4.22 unlocked freq and voltage full user control and S17 unlocked with full user controls.

NO accidental dev fee connections because thers is NO DEV FEE

PM for purchase details.

Limited public Nitrous v2.0 version will be available in the next couple of days.

Visit this thread for details

https://bitcointalk.org/index.php?topic=5132758

Reference this post in a PM, get a license for mine, free.

-j

[tps_star]

hi i am new and have question
i have z11 miner with APW7 power
1: i can overclock with this power or i need buy 2000w or 2200w power ?
2: if i use my orginal power my hashrate up to 150k ?
3: with z11 i can mine 3 diffrent coin with add 3 diffrent url and worker (for example zcl,zac,zencash Simultaneous)?
best regard

[efudd]

hi i am new and have question
i have z11 miner with APW7 power
1: i can overclock with this power or i need buy 2000w or 2200w power ?
2: if i use my orginal power my hashrate up to 150k ?
3: with z11 i can mine 3 diffrent coin with add 3 diffrent url and worker (for example zcl,zac,zencash Simultaneous)?
best regard

1) APW7 should be good for up to ~960mV per board, however, the actual usage requirement will vary from ASIC to ASIC.
2) Potentially. 781-793 + 940mV should get you there, or pretty close. From there, you'd tune down the voltage on each board to optimize your power:hash ratio.
3) No. This is not a functionality of cgminer.

-j

[efudd]

Ayup.... already responded.

-j

[chipless]

Ya know I thought we moved forward and quit the bs until today. It is like you want to keep it going and its pretty sad.

You do need to tell the people they dont get a license you only set it on your end for the miner to not mine in dev mode and you also need to let them know there is a bug in your setup that could mine them in dev mode accidently.

[efudd]

Ya know I thought we moved forward and quit the bs until today. It is like you want to keep it going and its pretty sad.

You do need to tell the people they dont get a license you only set it on your end for the miner to not mine in dev mode and you also need to let them know there is a bug in your setup that could mine them in dev mode accidently.

Monkey's fling poo.

re: license, don't speak to things you have no clue about. the default images include a "license" already. I just activate them. You may think you know how my licensing works, but you don't.

re: dev mode, don't speak to things you have no clue about.

re: Other bugs, things happen, dev fixes them. Yay!

BTW, this is your 2nd post flinging poo today, so I have a song for you: https://www.youtube.com/watch?v=staSD9-wlRE !

-j

[chipless]

Ya know I thought we moved forward and quit the bs until today. It is like you want to keep it going and its pretty sad.

You do need to tell the people they dont get a license you only set it on your end for the miner to not mine in dev mode and you also need to let them know there is a bug in your setup that could mine them in dev mode accidently.

Monkey's fling poo.

re: license, don't speak to things you have no clue about. the default images include a "license" already. I just activate them. You may think you know how my licensing works, but you don't.

re: dev mode, don't speak to things you have no clue about.

re: Other bugs, things happen, dev fixes them. Yay!

BTW, this is your 2nd post flinging poo today, so I have a song for you: https://www.youtube.com/watch?v=staSD9-wlRE !

-j

You mean default license and you authorize by the UUID.. Etiher way I guess you want to keep things going, I was moving forward. We know who the bigger man was in this situation. Enjoy the rest of you day.

[FFI2013]

Do three over clocked z9 minis compare power and rates to a z9 just wondering because people are asking high amounts for z9s

[ExEric3]

2.3.1nh has been released for NiceHash users. This corrects an issue that prevented voltage controls from working properly in 2.3nh in some circumstances.

https://releases.broked.net/Z11_2.3.1nh.tar.gz

Thank you,

Jason

fan control not working
2.3.1nh for Z11

Could you check the latest built again, I'm sure I'm not the only one with a problem. Fan control does not work. It works in automatic mode only. It cannot be set manually.

I understand. I will look into this. It is specific to the nicehash version and is the result of an unexpected change from bitmain. They have removed fan control from the user in their latest releases. I will see if o can add that back in.

-j

Is that fan issue fixed?

[tps_star]

thancks for answer
if i use frequency 760 i get how ksol ?
and my chip temp is higher than orginal firmware ?

[efudd]

Do three over clocked z9 minis compare power and rates to a z9 just wondering because people are asking high amounts for z9s

My *personal* math was 1Z9=4Mini when OC’d. It’s the fact that the Z9s came in and prevented me from getting 60k out of that that created the firmware to begin with.

The power:hash for mini and z9 are comparable as best my memory provides.

-j

[efudd]

Is that fan issue fixed?

No, not at this time. The long and short of it is validation requires needing the ability to actually see/hear the fans during the testing (reading RPMs is not enough for a couple of reasons).

I have what I need to fix it (I think.. goes back to needing to test), just not validate it.

-j