[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[jimmyD30]

Hi, any way to chunk log files into more manageable sizes, like 4/8MB? maybe even an external script?

Use Notepad++ app
It can read 100-150MB *.txt files with no problem

Thank you, but opening the file is not the issue, searching is.

[Cryptomining2003]

these new kernels work great for me so far...I save 5w per gpu (compared to phoenixminer). I´ll test some days.

question: how´s your experience with overclocking? as I consume less power now, can I raise core clock to raise mhash? or is my oc limit the same?

[pp55]

Hi! I do migrate to TRM from another miner as RTM is really cool!
I use OverdriveNTool+AMD Memory Tweak XL for Navi cards, but latest OverdriveNTool can`t manage core voltage with drivers later than 20.5.1 and not perfect overall. Also most of my rigs runs later drivers((
What about memory and core clock and voltage settings via TRM? At least for Windows users... It`s a great feature from another miner I miss very much..
Or may be some advises regarding tools for Windows?

[neogeo]

ALL THE BEST FOR TRM CREW!
WELL DONE JOB FOR 7.0.22 MINER (NAVI accent kernel)!!!

[Mullah.Ahmed]

this thing kept crashing so often - I finally decided to switch to Phoenix Miner - 5 days non-stop mining still going strong.

bonus? HUGE savings on outrages devfees.

[waywoos]

pheonix is faster for my modded cards by 5mhs. 
im problably not doing something right.

[joseph32]

If you are happier with the worse miner and less money, I think no one will miss you here. It's still your decision.

Merry x-mas to all

[batsonxl]

TRM is also good miner, i got good speeds and share on kawpow but on eth mining i was unlucky, here nobody helped to adjust trm for eth. ofcourse if your cards modded then it works good i really dont like idea modding bios 1 by 1 it is old school. will be very cool if trm can add core memory and voltage control and most important strap injection, write all of this in bat file and run it no need for AB or overdriventool. for me overdriventool makes my rigs unstable i dont know why i must give more voltage on ntool, many crashes with ntool. please developers give us this. thanks

[Trietch]

If you check share count between TRM and Phoenix, they are the same. That's because Phoenix seems to show fake hashrate (very little increase).

[Yirvenpaeae]

Hy,

i have vegas 56 hynix and are running it with blockchain driver, should i switched to the newest adrenalin?

thx.

[Crypto-Age]

on hiveos, teamred miner is sufficient. Low energy consumption, a bit lower hasrate than phoeneix.
Thanks

[Digital_Seytan]

 

It is a very goddamn high devfee, than many other mining software 2.5 percent gosh, hopefully you end up just like Claymoreminer

 

[vmgv]

Hi, guys

I have 4 GPUs (3 rx 580 and 1 rx 570) of 4 gb, I started mining Ravencoin (kawpow) after ETH. I have a problem, after 40 minutes of work, the machine shuts down. It's my turn to reboot and restart, does anyone have any ideas? This is my configuration:

teamredminer.exe -a kawpow --temp_limit=95 --enable_compute -o stratum+tcp://rvn-us-east1.nanopool.org:12222 -u WALLET.VMGV/myemail -p x

I thought it might be the temperatures and I limited them, it keeps restarting. I adjusted the power limit on MSI Afterburner and it continues to reset. I have 4 gb of RAM, SSD 60gb, modified virtual memory, enough disk space, windows 10, tweaks, windows defender off, etc.

I wait for some suggestion, thanks!

[buraz11]

Kawpow requires more power and stock settings as far as i know so if you had higher mem freq you might want to go stock

[BitBlitzer]

If you are happier with the worse miner and less money, I think no one will miss you here. It's still your decision.

Merry x-mas to all

It's not a question of being happy, it's an observation everyone says that PH or Claymore cheats on sharing but no one really has proof.

I look between my rigs and my pools (I tested 4 pools same things)

9 * RX580 NITRO + SE / 8GB straps
Claymore: 304MHS
PheonixMiner: 302MHS
TeamRedMiner: 294MHS
LolMiner: 294 MHS

We still lose a lot of power from one miner to another. I haven't done the share number test yet.

it's just a shame to fall asleep on optimizations, development of 4GB cards ...
To release a miner without memory optimizations, having to use 50 software for that, claymore was good for that.

Here is an article where they proved that Phoenix miner inflates hashrates by about 3%.

https://github.com/Kerney666/trm-ethash-miner-tester

[Blisk]

Is it possible to set Intensity with this miner I  like to use my computer for word and still mine at the same time.

and I also get all the time
dev pool failed to connect.
to which pool is connecting and which port?

[Littlegrand]

Is it possible to have the miner shutdown when a GPU reaches a certain temperature instead of just stopping the GPU?

Thanks

[vmgv]

Kawpow requires more power and stock settings as far as i know so if you had higher mem freq you might want to go stock

Thanks a lot. I've modified the power limit to less and have an hour mining

[Clocker1000]

I wanted to give TRM a chance mining ETH but I am not having good luck with it.  

I'm using RaveOS.   My setup is just a 5x RX570 rig.  Using the exact same OC/voltage settings for Phoenix and TRM.  

TRM's reported number is a little less, which I expected, but (with TRM) after about 4-5 hours my rig drops from 153 MH/s to 120 MH/s  (every card drops to about 20MH/s instead of running at just over 30 MH/s).

Phoenix is stable for days with the exact same OC settings at 156 MH/s

I would like to make TRM work with stability if I can without sacrificing power consumption.



#0
XFX RX 570
8 GB
Samsung GDDR5, 113-57085STB3-M81
1150 | 2150 | 850
31.23 Mh/s
50 0 0
50º
50%
77Wh

#1
XFX RX 570
8 GB
Samsung GDDR5, 113-57085STB3-M81
1150 | 2150 | 850
31.23 Mh/s
46 0 0
50º
50%
76Wh

#2
XFX RX 570
8 GB
Samsung GDDR5, 113-57085STB3-M81
1150 | 2150 | 850
31.23 Mh/s
50 0 0
48º
50%
75Wh

#3
XFX RX 570
8 GB
Samsung GDDR5, 113-57085STB3-M81
1150 | 2150 | 850
31.23 Mh/s
49 0 0
49º
50%
77Wh

#4
XFX RX 570
8 GB
Samsung GDDR5, 113-57085STB3-M81
1150 | 2150 | 850
31.22 Mh/s
53 0 0
46º
50%
79Wh

[MegaVlad]

Hello.
Can anyone tell me the simplest way to reboot rig, when any videocard detects faulty?
In RaveOS.
Can you tell me exact example?
Thank you in advance.