[POOL] YAAMP.COM multipool multialgo profit switch with exchange

[dexu]

Could you please try to find out why Titan firmware v2.00 (meaning bfgminer 5.1.0-titan-2.00) has horrible reject ratio with both scrypt and scryptn having a lot of "invalid time rolling" jobs. This is the only pool where I have seen this error (no problems on p2pool, litecoinpool, nicehash, etc). And the reject ratio is crazy, over 20% and speed of under 300MH/s for scrypt.

When I used the bfgminer from Titan firmware v1.97 (meaning bfgminer 5.0.0-titan-1.96, notice KnC did not change the version number there from 1.96) the "invalid time rolling" does not happen and I get the usual ~340MH/s.

Got the same problem here, only on yaamp pool.

[1714064173]

1714064173

[dexu]

Downgraded and its ok ..

[_javi_]

is it normal..??  i get lots of "quark extranonce change requested".  (sgminer 5.1, win7 64)

[phila]

Quote from: MarvinO on April 22, 2015, 05:18:26 AM

Could you please try to find out why Titan firmware v2.00 (meaning bfgminer 5.1.0-titan-2.00) has horrible reject ratio with both scrypt and scryptn having a lot of "invalid time rolling" jobs. This is the only pool where I have seen this error (no problems on p2pool, litecoinpool, nicehash, etc). And the reject ratio is crazy, over 20% and speed of under 300MH/s for scrypt.

When I used the bfgminer from Titan firmware v1.97 (meaning bfgminer 5.0.0-titan-1.96, notice KnC did not change the version number there from 1.96) the "invalid time rolling" does not happen and I get the usual ~340MH/s.


Got the same problem here, only on yaamp pool.

Also same...  including:

[2015-04-24 00:01:12] Pool 1 is sending mismatched block contents to us (0 is n
ot 1-1)

With me it's 30% rejects and Titan bombs out after a minute or so, after which I cant connect to it until I switch pool or reboot.  Usually reboot instead since after all the "invalid time rolling" and BFG disconnecting it struggles to perform or even to start hashing again at any other pool right after.

Would really like to mine scrypt at yaamp as well, all my GPU's are hashing here and my Titan is missing out on all the action.

[unitedminers]

Would really like to mine scrypt at yaamp as well, all my GPU's are hashing here and my Titan is missing out on all the action.

I have exactly the same problem with Titan 1.94 beta. High reject rate (till 20%), many disconnects (Europe), stops hashing. No Problems with other pools.

[dexu]

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

Hey Yaamp, please add MONA coin to this awesome pool


Best Regards.

[unitedminers]

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

What's your Titan firmware? Any extra settings?

[dexu]

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

What's your Titan firmware? Any extra settings?

Got this firmware - https://github.com/KnCMiner/titan/releases/download/v1.97/titan-upgrade-1.97.bin works best for me.

And stratum+tcp://pool-adress:port/#xnsub#skipcbcheck#notls as pool adress and [F]ailover only enabled
 .. that's it


Regards.

[unitedminers]

Got this firmware - https://github.com/KnCMiner/titan/releases/download/v1.97/titan-upgrade-1.97.bin works best for me.

And stratum+tcp://pool-adress:port/#xnsub#skipcbcheck#notls as pool adress and [F]ailover only enabled
 .. that's it

First of all thank you for sharing your settings!

After 5 minutes I'm hashing with about 3-5 percent rejects and decreasing. I'm still at version 1.94 beta, added /#xnsub#skipcbcheck#notls and switched from "Load balance" to "Failover".

After 16 minutes only 1.6 percent reject rate

BTW why have you chosen Litecoins for the payout?

[dexu]

Got this firmware - https://github.com/KnCMiner/titan/releases/download/v1.97/titan-upgrade-1.97.bin works best for me.

And stratum+tcp://pool-adress:port/#xnsub#skipcbcheck#notls as pool adress and [F]ailover only enabled
 .. that's it

First of all thank you for sharing your settings!

After 5 minutes I'm hashing with about 3-5 percent rejects and decreasing. I'm still at version 1.94 beta, added /#xnsub#skipcbcheck#notls and switched from "Load balance" to "Failover".

After 16 minutes only 1.6 percent reject rate

BTW why have you chosen Litecoins for the payout?

No problemm unitedminers.
Why Litecoin ? Because I have chance to earn more in the stock market
And what's your payout currency ?

[unitedminers]

Wow! My reject rate is now at 0.4 but I don't get any "Accepted" messages since minutes.

And what's your payout currency ?

Bitcoin and some Dash from Xpool.

Why Litecoin ? Because I have chance to earn more in the stock market

So, you're trading Litecoin vs Bitcoin?

I've traded some coins at Cryptsy but not really successful Do have any tips where I can learn successful trading and making some extra coins?

[profall]

Mining Pool Reviews, Ratings and Rankings. 

www.BlockGen.net

YAAMP is listed on BlockGen, you can review them here: http://blockgen.net/miningPool/67

[tic-tac-totoro]

Seems like you're on a fork of BT, low diff (and different than other pools) and finding every block.

[Grout]

Hello Yaamp :-)

Would it be possible to provide miner statistics in the API? Especially the hashrate of each miner?
That would allow to compare accepted hashrate to what's reported by the miner and adjust our estimations.

Maybe just a big hash with all the stats under http://yaamp.com/api/miners?address=BITCOIN_WALLET

[smokiepot]

hi yaamp,

i get no payout since 48h. please clear the problem.
wallet : NepButuHEuSmkEbxXZ8epue2TRBddDY5Jw

thanks

[yaamp]

Hello Yaamp :-)

Would it be possible to provide miner statistics in the API? Especially the hashrate of each miner?
That would allow to compare accepted hashrate to what's reported by the miner and adjust our estimations.

Maybe just a big hash with all the stats under http://yaamp.com/api/miners?address=BITCOIN_WALLET

noted. we'll give a go when we get a chance soon.

[yaamp]

hi yaamp,

i get no payout since 48h. please clear the problem.
wallet : NepButuHEuSmkEbxXZ8epue2TRBddDY5Jw

thanks

we were short on NEOS for the last few days. 4 blocks just matured. payments went through.

[yaamp]

Seems like you're on a fork of BT, low diff (and different than other pools) and finding every block.

thanks for alerting on that. it tooks time before we could be on the right blockchain. we missed the ride. on their post, i saw many people were stuck at block 1960, like us.

[xalen]

Hello. Remove SIGU from script mining, POW is over. https://bitcointalk.org/index.php?topic=1028433.340

[unitedminers]

Why did the balance/pending become a flat line for the last 7 hours for scrypt mining?