dow1135
Newbie
 Offline
Activity: 43
Merit: 0
|
 |
June 04, 2014, 01:02:58 PM |
|
Well I think im going to purchase another S2. Does someone have a coupon they aren't going to use? Thanks
|
|
|
|
|
|
|
|
|
|
"There should not be any signed int. If you've found a signed int
somewhere, please tell me (within the next 25 years please) and I'll
change it to unsigned int." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
TracerX
|
|
June 04, 2014, 01:20:44 PM |
|
...better than early Batch 4 with 10 cards by quite a long way
not as good as batch 3 with 10 cards.
the batch 4 seems to dwindledown to around 850 . i did ask about this on another thread.
anyone experienced a dwindledown rig??
I must admit that mine has done that from time to time and I've not figured out why exactly. Sometimes I found it was leaking shares to my backup pool and other times I found pulling and reinserting the cards helped. I also found that the gui would sometimes report a different hashrate to the pool and I think that was due to the ntp going out of whack or something, try clicking Save&Apply in the Miner config and see if it starts cgminer with the full hashrate. I assume this is an issue with the PSU, but I'm not an EE. Has anyone seen this problem after upgrading their PSU to 1200-1300? |
|
|
|
|
PhilippeD
Member
Offline
Activity: 81
Merit: 10
|
|
June 04, 2014, 03:29:40 PM |
|
I receive my AntMiner today. No shipement problem, send in 5 day, work perfectly. Thank you very much Bitmain. Good job. Here is my pictures : |
|
|
|
|
ak49er
Sr. Member
Offline
Activity: 672
Merit: 250
Buy, sell and store real cryptocurrencies
|
|
June 04, 2014, 03:59:30 PM |
|
1000w is clearly NOT ENOUGH and anyone who hasnt upgraded is losing GH by the second.
......
anyway - ive learnt that they need more power for a fact and i will be lucky if the ever helpful bitmain can sort me out
My batch 4 S2 is running quite happily at 1005 GH/s on the original 1000W PSU, (1086W at the wall). Not sure where you're getting your facts. |
|
|
|
|
BITMAIN (OP)
|
|
June 04, 2014, 04:05:22 PM |
|
New price for AntMiner S2 1 TH/s Kit: 2247 USD each one, shipping cost included.
|
Cloud Mining? Just Go to Hashnest.com Best Liquidity Lowest Price 100% Real Mining Back Up
|
|
|
|
TracerX
|
|
June 04, 2014, 04:32:38 PM |
|
1000w is clearly NOT ENOUGH and anyone who hasnt upgraded is losing GH by the second.
......
anyway - ive learnt that they need more power for a fact and i will be lucky if the ever helpful bitmain can sort me out
My batch 4 S2 is running quite happily at 1005 GH/s on the original 1000W PSU, (1086W at the wall). Not sure where you're getting your facts. How long can that PSU run overspec? That it's running fine now is great, but how long will it do that? I'm not being confrontational, I'm an owner of an S2 and am curious. |
|
|
|
|
|
samsonn25
|
|
June 04, 2014, 04:44:55 PM
Last edit: June 04, 2014, 05:14:09 PM by samsonn25 |
|
Most psu can run over spec 10-20% for awhile, I dont know about the build quality of Enermax, maybe thats why they dont ship as complete units anymore.
Corsair and Seasonic EVGA are pretty good.
|
|
|
|
|
|
TracerX
|
|
June 04, 2014, 04:50:51 PM |
|
Most psu can run over spec 10-20% for awhile, I dont know about the build quality of Enermax, maybe thats why they dont ship as complete units anymore.
Corsair and Seasonic Plats are pretty good.
I'm thinking about a Corsair 1300, but would hate to drop the cash if it won't really "buy" me anything. That said, what are the odds the upgrade blades BM has referred to will come it at lesser wattage? I'll probably just bite the bullet and replace the PSU, my S2 slowly works down to 970 GH/s, even though only 4 chips are showing as disabled. I'm guessing my PSU is acting up. |
|
|
|
|
|
TracerX
|
|
June 04, 2014, 05:03:17 PM |
|
you might check your thermal grease. if its dried out or non-existent you may be getting increased errors - its something im looking into.
Let me know if you find out anything, re: thermal grease. Do we know of a way to monitor individual chip hash rate via SSH? If I could narrow it down to a specific blade, I would happily reapply thermal paste. |
|
|
|
|
Biodom
Legendary
Offline
Activity: 3752
Merit: 3869
|
|
June 04, 2014, 05:21:54 PM |
|
Most psu can run over spec 10-20% for awhile, I dont know about the build quality of Enermax, maybe thats why they dont ship as complete units anymore.
Corsair and Seasonic Plats are pretty good.
I'm thinking about a Corsair 1300, but would hate to drop the cash if it won't really "buy" me anything. That said, what are the odds the upgrade blades BM has referred to will come it at lesser wattage? I'll probably just bite the bullet and replace the PSU, my S2 slowly works down to 970 GH/s, even though only 4 chips are showing as disabled. I'm guessing my PSU is acting up. minersource.net has a good deal on used EVGA1300 for $140. I've got a new power board with black caps-anybody has this? Will take a picture later for comparison and will also try the new board with old psu, then try to change to EVGA1300 and report performance. |
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
June 04, 2014, 05:25:26 PM |
|
minersource.net has a good deal on used EVGA1300 for $140.
I've got a new power board with black caps-anybody has this? Will take a picture later for comparison and will also try the new board with old psu, then try to change to EVGA1300 and report performance.
its sold out |
|
|
|
|
ak49er
Sr. Member
Offline
Activity: 672
Merit: 250
Buy, sell and store real cryptocurrencies
|
|
June 04, 2014, 05:49:28 PM |
|
1000w is clearly NOT ENOUGH and anyone who hasnt upgraded is losing GH by the second.
......
anyway - ive learnt that they need more power for a fact and i will be lucky if the ever helpful bitmain can sort me out
My batch 4 S2 is running quite happily at 1005 GH/s on the original 1000W PSU, (1086W at the wall). Not sure where you're getting your facts. How long can that PSU run overspec? That it's running fine now is great, but how long will it do that? I'm not being confrontational, I'm an owner of an S2 and am curious. Well I have to say that I'm curious too.  I have a spare 1000W for if and when this one goes tits up. |
|
|
|
ak49er
Sr. Member
Offline
Activity: 672
Merit: 250
Buy, sell and store real cryptocurrencies
|
|
June 04, 2014, 06:00:36 PM |
|
not sure where you're getting your logic... My logic is quite simple. I paid for a 1TH/s miner, and that's exactly what I got. Now undoubtedly the S2 pushes that Enermax PSU to its limits, and a much safer bet would be a 1200 or 1300W unit. But I'm not loosing GH by the second. I certainly don't have the overhead required to overclock, but then I'm not sure I want to do that anyway. |
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
June 04, 2014, 06:00:52 PM |
|
1000w is clearly NOT ENOUGH and anyone who hasnt upgraded is losing GH by the second.
......
anyway - ive learnt that they need more power for a fact and i will be lucky if the ever helpful bitmain can sort me out
My batch 4 S2 is running quite happily at 1005 GH/s on the original 1000W PSU, (1086W at the wall). Not sure where you're getting your facts. and mine are fluctuating 'happily' around 900-1000 INCLUDING the one with ONLY 9 boards which in the short time its been running seems more stable. you could probably get 850GH from a 850w PSU. the point which seems obvious to me is the boards have the potential to do more..and the 1000w PSU prevents that. not sure where you're getting your logic... @Tracer X - excellent point about new blades..who knows if higher or lower, id guess higher. but might be better to hold off unless u have the 1200-1300w psu handy... which u and i do not.. you might check your thermal grease. if its dried out or non-existent you may be getting increased errors - its something im looking into. I replaced my Batch 2 PSU with a 1300W EVGA and its made zero difference to the hash rate. |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7862
'The right to privacy matters'
|
|
June 04, 2014, 06:05:15 PM |
|
minersource.net has a good deal on used EVGA1300 for $140.
I've got a new power board with black caps-anybody has this? Will take a picture later for comparison and will also try the new board with old psu, then try to change to EVGA1300 and report performance.
its sold out buy one new for 195 and get back 2900 in point = 29usd to spend later. read how here. https://bitcointalk.org/index.php?topic=591721.msg7073381#msg7073381there are more discounts possible so a new one is about 160 with a 10 year warranty |
|
|
|
|
nottm28
|
|
June 04, 2014, 06:39:00 PM |
|
perhaps there are other limiting factors...
Could be networking issue which I have found has been the cause of most of my unexplained pain. Try swapping the network cable from the best miner to the worst miner and run for a few hours... |
donations not accepted
|
|
|
|
samsonn25
|
|
June 04, 2014, 06:47:58 PM |
|
1000w is clearly NOT ENOUGH and anyone who hasnt upgraded is losing GH by the second.
......
anyway - ive learnt that they need more power for a fact and i will be lucky if the ever helpful bitmain can sort me out
My batch 4 S2 is running quite happily at 1005 GH/s on the original 1000W PSU, (1086W at the wall). Not sure where you're getting your facts. and mine are fluctuating 'happily' around 900-1000 INCLUDING the one with ONLY 9 boards which in the short time its been running seems more stable. you could probably get 850GH from a 850w PSU. the point which seems obvious to me is the boards have the potential to do more..and the 1000w PSU prevents that. not sure where you're getting your logic... @Tracer X - excellent point about new blades..who knows if higher or lower, id guess higher. but might be better to hold off unless u have the 1200-1300w psu handy... which u and i do not.. you might check your thermal grease. if its dried out or non-existent you may be getting increased errors - its something im looking into. I replaced my Batch 2 PSU with a 1300W EVGA and its made zero difference to the hash rate. cant say fairer than that. perhaps my older batch 4 is just a lemon and my battered 'new' rig is a potential 1st place contender. perhaps there are other limiting factors... just because we paid for 1TH doesnt mean we should willfully ignore the possibility of a potential increase. EVERY other rig ive ever ran has given more than it was touted as able to - eventually... why should these be any different?? forgot to add - the rig powered by my OCZ1000w hasnt dipped below 1TH in days - while both the 10 blade & 9 blade rig are powered by enermax 1000w and are fluctuating between 900 -1000Gh/s the power cable for the OCZ is almost 3 times as thick as the enermax cable... and relatively cool to touch - enermax cables are considerably warmer. Assuming Enermax cable is minimum 16 guage thats 10amp. Could be psu is struggling at full load to supply the necessary amps to miner, because even 1000 watt unit is most efficient at 50% load rating this drops at 95-100%. Maybe switch the power cables for another test that would narrow down. |
|
|
|
|
|
|
|
TracerX
|
|
June 04, 2014, 07:51:45 PM |
|
I replaced my Batch 2 PSU with a 1300W EVGA and its made zero difference to the hash rate.
Thank you for the reply, I'll hold off for now. Appreciate it. |
|
|
|
|
|
nottm28
|
|
June 04, 2014, 07:52:40 PM |
|
I replaced my Batch 2 PSU with a 1300W EVGA and its made zero difference to the hash rate.
Thank you for the reply, I'll hold off for now. Appreciate it. +1 me too - nearly ordered one before I seen your post... |
donations not accepted
|
|
|
|
