[ANN][1000 SYNC] Proof of Stake now run by BLOCKCHAIN DEVELOPMENT COMPANY

[LTCagt]

I am having trouble using a back up sync wallet.dat. I sent sync to my wallet and I was having trouble getting it connected so I had to delete it but saved the wallet.dat file. I was finally able to get the wallet to connect to the network and then tried to replace the wallet.dat file but it does not seem to be working. Does anyone know how to fix this?

if you have synced wallet you can try this command line key one by one until issue will be resolved (you must backup your "wallet.dat" before):
 -rescan
 -reindex
 -salvagewallet

I tried those commands and it said method not found. I see the transaction on the block explorer and I still have the same address, not sure why it isn't working.

assuming it don't lock, go into the debug console and type dumpwallet <filename> and it will export the wallet to a text file. Then backup your wallet.dat file, delete it from the active folder, and sync. Once you're in sync, go again to the console and type importwallet <filname of the file you dumped> and it should import all of your previous keys and transactions. It worked for me.

I tried these and my wallet still has 0 Sync. When I first downloaded a wallet I sent Sync to it but couldnt get it to connect to the network so I saved the wallet.dat file directly from the AppData/Roaming/Sync folder and then downloaded the newest version of the wallet. I still can't seem to recover this backup and would appreciate anyone that could help me.

direct inet-connection or behind a router ?

router

ok thats the Problem - sometimes your Firewall is automatically conf´ed but your router dont

which type of router ? you have to open the port there - the easiest way is to write the port in the conf file
and then open that port on the router

do you know how to do this ?

 server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

[LJ33]

I am having trouble using a back up sync wallet.dat. I sent sync to my wallet and I was having trouble getting it connected so I had to delete it but saved the wallet.dat file. I was finally able to get the wallet to connect to the network and then tried to replace the wallet.dat file but it does not seem to be working. Does anyone know how to fix this?

if you have synced wallet you can try this command line key one by one until issue will be resolved (you must backup your "wallet.dat" before):
 -rescan
 -reindex
 -salvagewallet

I tried those commands and it said method not found. I see the transaction on the block explorer and I still have the same address, not sure why it isn't working.

assuming it don't lock, go into the debug console and type dumpwallet <filename> and it will export the wallet to a text file. Then backup your wallet.dat file, delete it from the active folder, and sync. Once you're in sync, go again to the console and type importwallet <filname of the file you dumped> and it should import all of your previous keys and transactions. It worked for me.

I tried these and my wallet still has 0 Sync. When I first downloaded a wallet I sent Sync to it but couldnt get it to connect to the network so I saved the wallet.dat file directly from the AppData/Roaming/Sync folder and then downloaded the newest version of the wallet. I still can't seem to recover this backup and would appreciate anyone that could help me.

direct inet-connection or behind a router ?

router

ok thats the Problem - sometimes your Firewall is automatically conf´ed but your router dont

which type of router ? you have to open the port there - the easiest way is to write the port in the conf file
and then open that port on the router

do you know how to do this ?

 server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

So I need to add port=24241 to the sync conf file?

[LTCagt]

yes - as it is written 

not as a rpc-port - as a port

"port=24241" and then go to configure your router

[LTCagt]

yes - as it is written 

not as a rpc-port - as a port

"port=24241" and then go to configure your router

and if you dont know HOW to configure your router - look for the Name and model and i look for the right guidance

[LTCagt]

only 10,24 to go to 1,99 while 26 want to buy 

thats great

[LTCagt]

Wondering if there is anyone in the community who can build a simple Paypal/Sync exchange.

We need to bypass BTC, allow ppl to buy Sync direct with Paypal.

Or if you know anyone, pls contact sync@syncfund.com

That's extremely dangerous due to chargebacks.

https://c-cex.com/ offers usd/alt-coins

not only that paypal are literallt the worst company on the planet
they thieve peoples funds willy nilly you only need to look up
on the web at the horror stories, we do not want to be associated with
anyone or anything that will tarnish our image and what sync stands for!

+1 please not paypal

[youngg]

Wondering if there is anyone in the community who can build a simple Paypal/Sync exchange.

We need to bypass BTC, allow ppl to buy Sync direct with Paypal.

Or if you know anyone, pls contact sync@syncfund.com

That's extremely dangerous due to chargebacks.

https://c-cex.com/ offers usd/alt-coins

not only that paypal are literallt the worst company on the planet
they thieve peoples funds willy nilly you only need to look up
on the web at the horror stories, we do not want to be associated with
anyone or anything that will tarnish our image and what sync stands for!

+1 please not paypal

Lol, I understand the vitriol towards PP but there is a very large, untapped market that uses it heavily. They'd buy a ton of Sync if we make it super easy - and without the BTC/Sync travel.

I want to go after this market but I need a better way for them to buy Sync. Open to ideas but like I said, they'll buy it with Paypal, this I knows.

[LTCagt]

DO YOU WANT MORE ? 

[Biomech]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

 

Code:

{
"enabled" : true,
"staking" : false,
"errors" : "",
"currentblocksize" : 1000,
"currentblocktx" : 0,
"pooledtx" : 0,
"difficulty" : 0.00085891,
"search-interval" : 1,
"weight" : 0,
"netstakeweight" : 71070,
"expectedtime" : -1
}

[MsCollec]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

[Biomech]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

Ok, so there's a variable time to maturity? I knew there was a maximum, but I thought it would start showing weight after the minimum. If that's not the case, then all is well I'm mining at the multipool, so it'll increase in time. Thanks for the quick answer.

[MsCollec]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

Ok, so there's a variable time to maturity? I knew there was a maximum, but I thought it would start showing weight after the minimum. If that's not the case, then all is well I'm mining at the multipool, so it'll increase in time. Thanks for the quick answer.

Not really but since staking works like mining, nevermind I mixed up no matured coins for staking with orphaned blocks.

You are using the latest wallet not the old version.

[Biomech]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

Ok, so there's a variable time to maturity? I knew there was a maximum, but I thought it would start showing weight after the minimum. If that's not the case, then all is well I'm mining at the multipool, so it'll increase in time. Thanks for the quick answer.

Not really but since staking works like mining, nevermind I mixed up no matured coins for staking with orphaned blocks.

You are using the latest wallet not the old version.

I believe so. Compiled from github about two weeks ago.

[ontopicplease]

Still problems with syncing.Maybe someone can help. This is what I did.
I went to users/appdata/roaming/sync and made a new txtdocument where I put;
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

Then I deleted everything except this txt document and wallet.dat.

Wallet still not syncing, can anyone tell me what I did wrong?

[LTCagt]

Still problems with syncing.Maybe someone can help. This is what I did.
I went to users/appdata/roaming/sync and made a new txtdocument where I put;
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

Then I deleted everything except this txt document and wallet.dat.

Wallet still not syncing, can anyone tell me what I did wrong?

rename it to sync.conf ?

[andromeda66]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

Hey dev....sent you a pm...can you take a look?...would be great.

Regards
andromeda66

[MsCollec]

Question:

Is there still a minumum amount of sync needed to stake? I ask because while I have a small amount, it should have matured by now. It's still saying not mature, rather than showing weight. I wouldn't expect it to stake vs. the network very quickly, but it should be showing weight by now.

Just in case I'm missing the obvious ( a thing that seems to happen too often), here's the output from getstakinginfo

There's no minimum amount of sync required for staking. I believe you should be able to find a block within the maximum stake period =30 days.

However, the network weight has increased significantly over the past few weeks.

Hey dev....sent you a pm...can you take a look?...would be great.

Regards
andromeda66

Not received

[MsCollec]

Still problems with syncing.Maybe someone can help. This is what I did.
I went to users/appdata/roaming/sync and made a new txtdocument where I put;
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

Then I deleted everything except this txt document and wallet.dat.

Wallet still not syncing, can anyone tell me what I did wrong?

Did you changed the file type to all files

[ontopicplease]

Still problems with syncing.Maybe someone can help. This is what I did.
I went to users/appdata/roaming/sync and made a new txtdocument where I put;
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

Then I deleted everything except this txt document and wallet.dat.

Wallet still not syncing, can anyone tell me what I did wrong?

rename it to sync.conf ?

Thanks a lot; syncing!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[LTCagt]

Still problems with syncing.Maybe someone can help. This is what I did.
I went to users/appdata/roaming/sync and made a new txtdocument where I put;
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=188.226.243.136
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58

Then I deleted everything except this txt document and wallet.dat.

Wallet still not syncing, can anyone tell me what I did wrong?

rename it to sync.conf ?

Thanks a lot; syncing!!!!!!!!!!!!!!!!!!!!!!!!!!!!

great