[ANN][1000 SYNC] Proof of Stake now run by BLOCKCHAIN DEVELOPMENT COMPANY

[mikeyfinn]

ah i see well i hope he gets back soon
as he was getting things done with bte 38
since hes gone that whole side of things has just stopped,
not from lack of trying

Well, last week VOOT was #1 and it's now listed, so we NEED to get those 260-ish votes to push us up there from #2.

Also, his calls on the spikes and dips were amazingly accurate!

[sovie]

yes he had the account in order to vote set up
I sent him some btc and he used that to vote as well
considering we've spent over 2btc more than any other coin
including voot by miles you would think they would have added us by now
since they are making a lot out of this from us.
Thats exchanges for you they are all dodgy no matter which side of the planet
they are on.

His calls were very accurate I'm going to see if he can let me in on his forsight
i'm reasonably good at spotting market trends but no where near as good as
he seems to be.

[hamm3r]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

[mikeyfinn]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

add whats bolded

[hamm3r]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

add whats bolded

Thanks, but still nothing so far

[mikeyfinn]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

add whats bolded

Thanks, but still nothing so far

I have 59 connections at the moment and those are the nodes i have in my conf.

[hamm3r]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

add whats bolded

Thanks, but still nothing so far

I have 59 connections at the moment and those are the nodes i have in my conf.

Added those nodes aswell. Nothing. Redownloaded with different browser. Still nothing. I'm on windows 7; first wallet that gives me a bit of a headache; luckily a new wallet is due.

[tom14cat14]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

Now when you say added to the wallet folder do you mean you added it to the app/data folder? or where you launch your wallet?

[sovie]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

[hamm3r]

Hey guys,

I tried making a sync.conf file(i also named the file sync.conf)  with this info (from 1st post)

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

But my wallet keeps getting 0 connections to the network. I put the conf-file in my wallet folder ofcourse. Help much appreciated!

Now when you say added to the wallet folder do you mean you added it to the app/data folder? or where you launch your wallet?

Nah i added in the %appdata% folder.

[hamm3r]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

[Youghoor]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

[hamm3r]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

text; i'm dutch, seems i received typing aid while writing it heh

[Youghoor]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

text; i'm dutch, seems i received typing aid while writing it heh

oh ok no problem it happens

[tom14cat14]

Hammer you might have missed my question did you put the file in the app/data?

[magpr]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

text; i'm dutch, seems i received typing aid while writing it heh

You need to check, maybe you create Sync.conf.txt file, look for show standart file extension windows feature.

[hamm3r]

Hammer you might have missed my question did you put the file in the app/data?

Nah i answered mate, but it's easy to miss with al those quotes i recon I added it to the appdata folder.

[tom14cat14]

Hammer you might have missed my question did you put the file in the app/data?

Nah i answered mate, but it's easy to miss with al those quotes i recon I added it to the appdata folder.

Yep I am the one that missed it.    so many responses right away.

[mikeyfinn]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

text; i'm dutch, seems i received typing aid while writing it heh

You need to check, maybe you create Sync.conf.txt file, look for show standart file extension windows feature.

^^this

check your preferences for files and make sure "hide extensions for known file types" is not checked. If you already knew this, no offense! Just trying to help.... 

[hamm3r]

this is mine on windows 7 64

Sync.conf

server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
addnode=107.170.51.29
addnode=107.170.206.182
addnode=192.241.244.198

Yea that was mine aswell. I made the file with: new file-tekst document- rename to sync.conf and then added the info from the TS.

tekst or text document

text; i'm dutch, seems i received typing aid while writing it heh

You need to check, maybe you create Sync.conf.txt file, look for show standart file extension windows feature.

^^this

check your preferences for files and make sure "hide extensions for known file types" is not checked. If you already knew this, no offense! Just trying to help.... 

Checked, but all as it should be None taken, just glad people are trying to help; mostly the most Obvious stuff gets overlooked when working All help is appreciated as i'm getting desperate