[XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos

[policymaker]

So the more people using XC, and the more the anon trans they use, the more the fees u collect?

[1714743237]

1714743237

[1714743237]

1714743237

[dadon]

Here is my wallet showing the xnode transactions that came through over night and the fees I collected from the transactions



in my config I just added the east and west nodes and ran the xnode-mainnet.bat

Just out of interest, how fees did you collect?

The fees I collected overnight are as follows:
0.037423
0.028602
0.00996
0.024015

that's not bad might have to set one up myself now, thanks for sharing.

[phosphorush]

So is there any problem of running Xnode with VPN? I read in the XC forum that I could open ports in my network for using the xnode wallet beta...

[tr8kr]

Can i send XC to Mintpal using the sendfrommixer command ?
And what is the command i need to write ?

I have a adress labelled Mintpal in my wallet can i use it and how ?

sendfrommixer <fromaccount> <toX11Coinaddress> <amount>,  What is the <fromaccount> ?

Bump

[520Bit]

Can i send XC to Mintpal using the sendfrommixer command ?
And what is the command i need to write ?

I have a adress labelled Mintpal in my wallet can i use it and how ?

sendfrommixer <fromaccount> <toX11Coinaddress> <amount>,  What is the <fromaccount> ?

Bump

<fromaccount> is the address label, if no label, leave it as blank like ''.

[Slaxt]

Can i send XC to Mintpal using the sendfrommixer command ?
And what is the command i need to write ?

I have a adress labelled Mintpal in my wallet can i use it and how ?

sendfrommixer <Mintpal> <toX11Coinaddress> <amount>,  What is the <fromaccount> ?

Bump

[tr8kr]

12:16:39 sendfrommixer 1 XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:39 Account has insufficient funds (code -6)
12:16:49 sendfrommixer "" XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:49 Account has insufficient funds (code -6)
12:16:53 sendfrommixer " " XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:53 Account has insufficient funds (code -6)
12:17:13 sendfrommixer "1" XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1.0
12:17:13 Account has insufficient funds (code -6)

I have enough funds in my wallet and its unlocked, i do this on my minting wallet not the xnode wallet.

[atcsecure]

12:16:39 sendfrommixer 1 XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:39 Account has insufficient funds (code -6)
12:16:49 sendfrommixer "" XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:49 Account has insufficient funds (code -6)
12:16:53 sendfrommixer " " XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1
12:16:53 Account has insufficient funds (code -6)
12:17:13 sendfrommixer "1" XH2xAiXB2H6tXSraubgfxWHKRUJR8rWdHm 1.0
12:17:13 Account has insufficient funds (code -6)

I have enough funds in my wallet and its unlocked, i do this on my minting wallet not the xnode wallet.

is your wallet labeled "1" ? Check under Receive Coins

also you can use coin control to see which wallet has the funds

[pinkman12345]

This may sound like a stupid question to you guys who are clever at this stuff, but, if i have 550 coins and set an Xnode up how does the network decide who gets the transaction fees? And also, if i have more coins to run my Xnode does that mean i have more of a chance of getting the fees?

Thanks for your continuous support guys this community is great!

[landcrab]

Just updated to v1.38 due to a minor bug..


http://xc-official.com/release/wallets/


All of the updates address specific items in the XNode code..

Part of that change requires a new wallet label called MIXER w/the XC's in it

The user guides will be updated first thing tomorrow morning to include these changes


ATCSECURE

Try and be less vague, what exactly is a "wallet label"
I've been running an xnode since they came out and last got any payment for doing so on 3rd June (updating wallets as soon as they come out), I never had any "wallet label" named MIXER, my wallet was unlocked for staking only & I simply ran the xnode mainnet batch file. What you are saying implies this has changed, where is the changelog for each new wallet release? Please clarify this, I am by no means a crypto newbie but you need to be more specific with details of how the software you are releasing needs to be configured.

[atcsecure]

Just updated to v1.38 due to a minor bug..


http://xc-official.com/release/wallets/


All of the updates address specific items in the XNode code..

Part of that change requires a new wallet label called MIXER w/the XC's in it

The user guides will be updated first thing tomorrow morning to include these changes


ATCSECURE

Try and be less vague, what exactly is a "wallet label"
I've been running an xnode since they came out and last got any payment for doing so on 3rd June (updating wallets as soon as they come out), I never had any "wallet label" named MIXER, my wallet was unlocked for staking only & I simply ran the xnode mainnet batch file. What you are saying implies this has changed, where is the changelog for each new wallet release? Please clarify this, I am by no means a crypto newbie but you need to be more specific with details of how the software you are releasing needs to be configured.

Change LOG is in the ZIP file for the v1.38 release

a wallet label, is the name you give the account when you create a new receive address

updated user guides will clearly show the procedure, and will be released shortly


ATCSECURE

[ChilliWinter]

So here is my config :

xnode unders windows, release 1.38

Wallet with address label : MIXER

550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)

running directly x11coin-qt.exe

with this X11Coin.conf

xmixer=1
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com

When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked

Now I'm awaiting expecting some transaction to go thru.

Am I right ?
Thanks

Correct and very clear.

So after looking into some details, I understood that we need to open tcp 32348 to listen from outside your lan. Just do it on your ISP router/firewall to allow redirection to your computer running xnode.

[policymaker]

For any1 concerned about ur network's safety by opening the port of w/e(cause I read that somewhere in here), just keep in mind that 99% of online software/games require u to open ur ports, either manually or automatically(in the router).

[landcrab]

Just updated to v1.38 due to a minor bug..


http://xc-official.com/release/wallets/


All of the updates address specific items in the XNode code..

Part of that change requires a new wallet label called MIXER w/the XC's in it

The user guides will be updated first thing tomorrow morning to include these changes


ATCSECURE

Try and be less vague, what exactly is a "wallet label"
I've been running an xnode since they came out and last got any payment for doing so on 3rd June (updating wallets as soon as they come out), I never had any "wallet label" named MIXER, my wallet was unlocked for staking only & I simply ran the xnode mainnet batch file. What you are saying implies this has changed, where is the changelog for each new wallet release? Please clarify this, I am by no means a crypto newbie but you need to be more specific with details of how the software you are releasing needs to be configured.

Change LOG is in the ZIP file for the v1.38 release

a wallet label, is the name you give the account when you create a new receive address

updated user guides will clearly show the procedure, and will be released shortly


ATCSECURE

Thanks for the rapid response mate, I have to admit I didn't check for a change.log in the most recent zip. It is rather sparse though, I will await an updated user guide. I am sure you are busy coding but I hope the requirements and config required for an xnode are clarified, I see we now have port forwarding being mentioned.

[dadon]

i'm guessing that in the future our Dev will make xnodes simple even for non tech ppl to set up, this is really important, it needs to be just the press of a button sort of thing, i hope this is possible, because it will make all the difference.

[phosphorush]

For any1 concerned about ur network's safety by opening the port of w/e(cause I read that somewhere in here), just keep in mind that 99% of online software/games require u to open ur ports, either manually or automatically(in the router).

thanks for the reply, I jsut asked because of this post:

http://forum.xctalk.com/index.php?/topic/40-running-an-xnode-why-should-you/?p=340

it seemed like something particular about the current version of Xnodes and the ports...

[reebokasss]

It seems that VRC is dumping now ) so we will see nice pump on XC today-tomorrow buy while you can buy cheap coins next stop 200-250 sat

[temrus63]

It seems that VRC is dumping now ) so we will see nice pump on XC today-tomorrow buy while you can buy cheap coins next stop 200-250 sat

+100500

[pinkman12345]

It seems that VRC is dumping now ) so we will see nice pump on XC today-tomorrow buy while you can buy cheap coins next stop 200-250 sat

+100500

Your signature that states that there is going to be a pump on the 10th June, is this a planned pump by whales? Or is that just to get some interest around the forum threads?

[BrewCrewFan]

Seems like as soon as we cross that 100k mark the market gets flooded with a ton of sells right back to the 97k range.