morfey911
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 06:05:10 PM Last edit: June 25, 2014, 06:16:07 PM by morfey911 |
|
maybe u should try hamsi expand big 7, like his config.
its only for x13 algo, so doesn't matter. Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
yes, i'm tried a new build of sgminer few days ago, but he is crashed after 60 sec, for now, if i'm not wrong should be everything fine.
|
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 08:48:45 PM |
|
No "shaders" specified; interesting. I'll check this out.
EDIT: Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
xI:320 just blew my card into SICK in about 15 minutes.
maybe u should try hamsi expand big 7, like his config. bullus you don't have 290/Xs do you? Yours are 280s and you run expand-big 4 right?
|
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 08:54:05 PM |
|
maybe u should try hamsi expand big 7, like his config.
its only for x13 algo, so doesn't matter. Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
yes, i'm tried a new build of sgminer few days ago, but he is crashed after 60 sec, for now, if i'm not wrong should be everything fine. Newest one fixed this in last 2 days. Try getting the newest build from kenshirothefist's link or badman74
|
|
|
|
cgladue
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 09:27:14 PM |
|
if your running 270x's should you use expand big at all or leave it out ?
|
|
|
|
bullus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 09:37:00 PM |
|
No "shaders" specified; interesting. I'll check this out.
EDIT: Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
xI:320 just blew my card into SICK in about 15 minutes.
maybe u should try hamsi expand big 7, like his config. bullus you don't have 290/Xs do you? Yours are 280s and you run expand-big 4 right? no I have 7950's and using expand big 4 also
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
badman74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 09:46:42 PM |
|
maybe u should try hamsi expand big 7, like his config.
its only for x13 algo, so doesn't matter. Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
yes, i'm tried a new build of sgminer few days ago, but he is crashed after 60 sec, for now, if i'm not wrong should be everything fine. Newest one fixed this in last 2 days. Try getting the newest build from kenshirothefist's link or badman74 ok i am gonna start putting my builds for v5_0 here https://github.com/badman74/Binaries/archive/V5_0.zip
|
|
|
|
coda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 09:58:24 PM |
|
No "shaders" specified; interesting. I'll check this out.
EDIT: Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
xI:320 just blew my card into SICK in about 15 minutes.
maybe u should try hamsi expand big 7, like his config. bullus you don't have 290/Xs do you? Yours are 280s and you run expand-big 4 right? no I have 7950's and using expand big 4 also what is hamsi expand big ? my value is 1 ... i've got some 7950 too, should i use 4 or 7 ?
|
BTC:18oLLFcxwwzfQt4F2YF7QzKyFeksq3dqsQ
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 10:30:38 PM |
|
No "shaders" specified; interesting. I'll check this out.
EDIT: Also, it should be explained right here that you aren't using the newest "form" of config files, with profiles and pools. Shouldn't matter though.
xI:320 just blew my card into SICK in about 15 minutes.
maybe u should try hamsi expand big 7, like his config. bullus you don't have 290/Xs do you? Yours are 280s and you run expand-big 4 right? no I have 7950's and using expand big 4 also what is hamsi expand big ? my value is 1 ... i've got some 7950 too, should i use 4 or 7 ? so far I have this to offer on expand-big At I:19 expand-big 1 you get 4M on a 290X At I:19 expand-big 4 you get 3.4-3.6M on a 290X Have not tried xI:32 (extremely low thread count) and expand-big 7 (extremely aggressive hamsi-expand) So for Hawaii's I would recommend trying expand-big 1, for Tahitis/Pitcairn, expand-big 4
|
|
|
|
coda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2014, 10:43:48 PM |
|
thanks for this explanation
so the 290X is hawai ? my 7950 must be tahiti if i remember well
edit: i've tried 4 and got 100% rejected and less hashrate hamsi expand big is better @ 1 for me
|
BTC:18oLLFcxwwzfQt4F2YF7QzKyFeksq3dqsQ
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 01:10:58 AM |
|
thanks for this explanation
so the 290X is hawai ? my 7950 must be tahiti if i remember well
edit: i've tried 4 and got 100% rejected and less hashrate hamsi expand big is better @ 1 for me
yep, check your bin files to be sure, but 290/X should be Hawaii
|
|
|
|
BombaUcigasa
Legendary
Offline
Activity: 1442
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 04:40:45 AM |
|
This version offers slightly lower hashrate than one month ago, it also causes GPUs to die more often. And the version is 4.2.2 or something, it never says 5.0...
|
|
|
|
coda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 09:36:01 AM Last edit: June 26, 2014, 09:46:09 AM by coda |
|
something strange happened i've got 2 miners updated with new drivers and new software the kernel switching seems to be a bit improved but only one is showing the good perfs increase ... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) the other one is more efficient (0.1MH/card) with the older version on sgminerV5 i've got the same cards on both, saffire 7950 dualX the differences are: ubuntu 12.4/mobo AS ROCK 970 + sempron 145 + 4 Go gskill Eco series (low voltage 1,35V DDR3 1600) for the strong one ubuntu 13.1/mobo MSI Z77A + celeron G1620 + 8 Go gskill Ripjaws series (normal 1,5V DDR3 1600) for the weak one if i put the same settings the weakest one give some gpus speed a 0 MH and/or sick cards ... the ASrock miner always beat the MSI, on previous miner versions i had also this problem of little underperforming miner with scrypt N, and now with X11 and X13 the problem increased ... do you have some ideas of where does it comes from ?
|
BTC:18oLLFcxwwzfQt4F2YF7QzKyFeksq3dqsQ
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 10:59:48 AM |
|
something strange happened i've got 2 miners updated with new drivers and new software the kernel switching seems to be a bit improved but only one is showing the good perfs increase ... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) the other one is more efficient (0.1MH/card) with the older version on sgminerV5 i've got the same cards on both, saffire 7950 dualX the differences are: ubuntu 12.4/mobo AS ROCK 970 + sempron 145 + 4 Go gskill Eco series (low voltage 1,35V DDR3 1600) for the strong one ubuntu 13.1/mobo MSI Z77A + celeron G1620 + 8 Go gskill Ripjaws series (normal 1,5V DDR3 1600) for the weak one if i put the same settings the weakest one give some gpus speed a 0 MH and/or sick cards ... the ASrock miner always beat the MSI, on previous miner versions i had also this problem of little underperforming miner with scrypt N, and now with X11 and X13 the problem increased ... do you have some ideas of where does it comes from ? Not a clue. I've got 3 rigs all running 290Xs and I just dropped my undervolt from 0.925V to 0.900V and experienced a slight, nominal boost in hashrate on all rigs, and the hashrate is not uniform either. On some rigs it's 5.460M for x11, on one other, it's 5.596M. No rhyme or reason to it, except the 5.596M is running on a i7-920 Nehalem so it's on old style X58 northbridge architecture with QPI as opposed to the two other rights which 1 is on a MSI-GS45 w/Haswell CPU for one and MSI-GS65 w/Haswell CPU for others. All have 8GB RAM and 12GB swap file.
|
|
|
|
coda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 12:24:27 PM |
|
something strange happened i've got 2 miners updated with new drivers and new software the kernel switching seems to be a bit improved but only one is showing the good perfs increase ... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) the other one is more efficient (0.1MH/card) with the older version on sgminerV5 i've got the same cards on both, saffire 7950 dualX the differences are: ubuntu 12.4/mobo AS ROCK 970 + sempron 145 + 4 Go gskill Eco series (low voltage 1,35V DDR3 1600) for the strong one ubuntu 13.1/mobo MSI Z77A + celeron G1620 + 8 Go gskill Ripjaws series (normal 1,5V DDR3 1600) for the weak one if i put the same settings the weakest one give some gpus speed a 0 MH and/or sick cards ... the ASrock miner always beat the MSI, on previous miner versions i had also this problem of little underperforming miner with scrypt N, and now with X11 and X13 the problem increased ... do you have some ideas of where does it comes from ? Not a clue. I've got 3 rigs all running 290Xs and I just dropped my undervolt from 0.925V to 0.900V and experienced a slight, nominal boost in hashrate on all rigs, and the hashrate is not uniform either. On some rigs it's 5.460M for x11, on one other, it's 5.596M. No rhyme or reason to it, except the 5.596M is running on a i7-920 Nehalem so it's on old style X58 northbridge architecture with QPI as opposed to the two other rights which 1 is on a MSI-GS45 w/Haswell CPU for one and MSI-GS65 w/Haswell CPU for others. All have 8GB RAM and 12GB swap file. sorry i made a error in my explanation for X11, with the MSI i had 1.9 MH/card on the old sgminer V5 now 2.5 MH/card on the new sgminer+ new divers with the ASrock i had 2.6 / card on the old sgminer V5 now 3.3/ card on the new sgminer+ new drivers so to correct what i said, yes i have hash increase on both but got somee underperforming problems on the MSI does it come from the hardware ? or does it comes from the OS ? i'm still wondering what happens ...
|
BTC:18oLLFcxwwzfQt4F2YF7QzKyFeksq3dqsQ
|
|
|
ebliever
Legendary
Offline
Activity: 1708
Merit: 1036
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 01:57:34 PM |
|
Sorry for the noob question, but I've been unable to get X13 working over several tries the last few weeks with different releases of SGminer. I run X11 fine. Does anyone have a working example of a 290X config file or a tutorial link or other simple explanation for what needs to be changed going from X11 to X13? Thanks for any info....
|
Luke 12:15-21
Ephesians 2:8-9
|
|
|
ramx2
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 02:13:57 PM |
|
Platimum4,
Can you please put the config file used for 290X? I want to mine X11 I read that your Hashrate is 5.4XX .. Is it ok to use the new miner with different pool ?
|
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 02:24:59 PM |
|
Platimum4, Can you please put the config file used for 290X? I want to mine X11 I read that your Hashrate is 5.4XX .. Is it ok to use the new miner with different pool ?
{ "profiles" : [ { "name" : "x11", "algorithm" : "darkcoin-mod", "intensity" : "19", "gpu-threads" : "1", "gpu-powertune" : "30", "worksize": "256", "gpu-engine": "1040", "gpu-memclock": "1300", "gpu-fan" : "60-100" }, { "name" : "x13", "algorithm" : "marucoin-mod", "intensity" : "19", "gpu-threads" : "1", "gpu-powertune" : "30", "worksize": "256", "gpu-engine": "1040", "gpu-memclock": "1300", "gpu-fan" : "65-100" }, { "name" : "scrypt", "xintensity" : "640", "gpu-powertune" : "10", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "10", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "80-100" }, { "name" : "nscrypt", "xintensity" : "320", "gpu-powertune" : "10", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "11", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "80-100" }, { "name" : "keccak", "intensity" : "13", "gpu-powertune" : "10", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "maxcoin", "gpu-engine" : "1040", "gpu-memclock" : "1300", "gpu-fan" : "70-100" } ], "hamsi-expand-big" : "1", "failover-only" : true, "shaders" : "2816", "gpu-vddc" : "0.900", "temp-cutoff" : "96", "temp-overheat" : "94", "temp-target" : "90", "auto-fan" : true, "auto-gpu" : true, "api-port" : "4028", "expiry" : "1", "gpu-dyninterval" : "7", "hotplug" : "5", "log" : "5", "queue" : "0", "scan-time" : "1", "temp-hysteresis" : "2", "shares" : "0", "no-restart" : true, "failover-switch-delay" : "30", "show-coindiff" : true, "remove-disabled" : true, "extranonce-subscription" : true } Have not tested scrypt/nscrypt yet it hasn't been served as most profitable. keccak performance not tested either.
|
|
|
|
ramx2
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 02:36:53 PM |
|
Platinum4, Thank you for the quick response ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Is there any special format to change in the config file to mine in different pool ? I want to mine X11 only, without importing the different profiles like the config file you have...
|
|
|
|
ebliever
Legendary
Offline
Activity: 1708
Merit: 1036
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 04:18:06 PM |
|
Platimum4,
Can you please put the config file used for 290X? I want to mine X11 I read that your Hashrate is 5.4XX .. Is it ok to use the new miner with different pool ?
For what it's worth, I also get slightly over 5.4 Mhash (21.74 across 4 290X's to be precise) with the following X11 configuration: Engine 1010 Memory 1250 xintensity 360 (I19 would be equal to 186, and I20 would be equal to 372 in xintensity) powertune 15 worksize 64 I don't have shaders listed but a thread concurrency of 24577. Threads 1 (I see from the example above that X13 should be able to run with no significant changes in configuration apart from calling out the correct kernel. I'll have to start fresh and give it another go...)
|
Luke 12:15-21
Ephesians 2:8-9
|
|
|
platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 26, 2014, 04:36:34 PM |
|
Platimum4,
Can you please put the config file used for 290X? I want to mine X11 I read that your Hashrate is 5.4XX .. Is it ok to use the new miner with different pool ?
For what it's worth, I also get slightly over 5.4 Mhash (21.74 across 4 290X's to be precise) with the following X11 configuration: Engine 1010 Memory 1250 xintensity 360 (I19 would be equal to 186, and I20 would be equal to 372 in xintensity) powertune 15 worksize 64 I don't have shaders listed but a thread concurrency of 24577. Threads 1 (I see from the example above that X13 should be able to run with no significant changes in configuration apart from calling out the correct kernel. I'll have to start fresh and give it another go...) On x13 the hamsi-expand-big setting will apply. If you are on 290/290X please try hamsi-expand-big "1", as the base setting is "4" in the .cl file. Somebody up above was using "7" and has some different results but seem to be less hashrate improvement then it was advertised to be. If you are pulling 5.4M per card on x11 with that sort of config, and I'm pulling 5.46M/5.596M per card with my config, then I may not try and fix what's not broken; I may drop to your clocks to compare if I need to. When I went up to xI:320 (little less than 360) it was blowing my cards into SICK real fast (well, the one continually troubling one) so I haven't gone back to tweak just yet, I restored it to I:19 for stability. My thread concurrency on previous builds was 14080 when it was specified, which was the default given to it by the miner. Ideally, I may try and knock my powertune down to 15. EDIT: On the rig with the frequent SICK card I stripped out gpu-powertune entirely, but I still have max avail power draw +50% set in MSI Afterburner. Not sure how I can measure electrical draw until I get my weekly usage sent to me from my energy company. Ever since started mining they knocked me into a high-use "hey we're sending you emails each week so you don't forget your usage" type shit. EDIT2: Stripped out all gpu-powertunes and no drop in hashrate; barely maybe .002; gonna roll with it for the time being at voltages .9V
|
|
|
|
|