NoTToN
Newbie
 Offline
Activity: 53
Merit: 0
|
 |
August 02, 2014, 02:19:20 PM |
|
Just search for some settings for your 280x..I get 3650kh/s for x11 ,7950. Glad it is working now  edit ah you are hashing x13..don't know what hashrate I get with x13.. 1 more question, what if i want to add x15 in auto-switching too? what will be the value of "fx=x" for x15? "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0", (this pass is for x11 and x13 only) |
|
|
|
|
|
|
|
|
|
The trust scores you see are subjective; they will change depending on who you have in your trust list. |
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
badman74
|
|
August 02, 2014, 02:41:09 PM
Last edit: August 02, 2014, 02:55:32 PM by badman74 |
|
Just search for some settings for your 280x..I get 3650kh/s for x11 ,7950. Glad it is working now edit ah you are hashing x13..don't know what hashrate I get with x13.. 1 more question, what if i want to add x15 in auto-switching too? what will be the value of "fx=x" for x15? "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0", (this pass is for x11 and x13 only) the number you enter should be your total hash rate in Mh/s for that algo i.e your x13 should be about 4.6 according to your screenshot f0=scrypt, f2=nscrypt, f3=x11, f4=x13, f5=keccak, f6=x15, f7=nist5 at a guess you should be using "pass" : "f0=0;f2=0;f3=6.5;f4=4.6;f5=0;f6=4;f7=0", or somewhere around there also try the develop binary in my sig and add "hamsi-expand-big" : "7",
"hamsi-short" : true,
"blake-compact" : true,
"keccak-unroll" : "8",
"luffa-parallel" : true,
to your conf |
|
|
|
|
|
Blisk
|
|
August 02, 2014, 03:03:27 PM |
|
Is there any good working multi currency pool which really works ok?
|
|
|
|
|
bullus
|
|
August 02, 2014, 03:17:50 PM |
|
Trademybit/nicehash/coinking..
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
|
Blisk
|
|
August 02, 2014, 03:28:50 PM |
|
Trademybit/nicehash/coinking..
thanks, nicehahs looks too complicated, coinking not working. Will try first one Trademybit have only BTC payout is there some pool with LTC payout? |
|
|
|
|
|
|
badman74
|
|
August 02, 2014, 05:45:04 PM |
|
after an hour of observation. here's what i got. im having a DEAD gpu. i wonder what's the problem.  lower your intensity... try 16 or 17 rejects should drop and hash rate will probably increase as well if you still get sick cards then maybe you pushed your gpu/mem clocks too high assuming you overclocked your cards |
|
|
|
|
|
platinum4
|
|
August 02, 2014, 11:49:17 PM |
|
RIP GPU1; you had a good run soldier.
|
|
|
|
|
reza_abay
Member
Offline
Activity: 94
Merit: 10
|
|
August 03, 2014, 08:37:41 AM
Last edit: August 03, 2014, 08:59:38 AM by reza_abay |
|
I have 5970 ati card tired with any sgminer 5 version only work with darkcoin.cl marucoin.cl kernel and crash my driver with darkcoin-mod , marucoin-modold , talkcoin-mod.cl , bitblockold.cl. here work fine with darkcoin.cl kernel in sgminer5.conf file  here work with darkcoin-mod.cl kernel and crash my driver  here work with sgminer 4.0.1 with x11mod.cl kernel work fine and my hash beter than darkcoin.cl kernel but i wana switch between algoritm with mod kernel. work good with x11mod,x13modold,nist5mod kernel  sgminer5.conf f {
"pools": [
{
"name" : "NH NIST5 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4340",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "NIST5"
},
{
"name" : "NH x13 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4337",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x13"
},
{
"name" : "NH x11 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4336",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x11"
},
{
"name" : "NH x15 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4339",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x15"
},
{
"name" : "NH NIST5 f",
"url" : "stratum+tcp://stratum.nicehash.com:3340",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "NIST5"
},
{
"name" : "NH x13 f",
"url" : "stratum+tcp://stratum.nicehash.com:3337",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x13"
},
{
"name" : "NH x11 f",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x11"
},
{
"name" : "NH x15 f",
"url" : "stratum+tcp://stratum.nicehash.com:3339",
"user" : "btc adress",
"pass" : "f0=0;f2=0;f3=5.50;f4=4.00;f5=0;f6=3.50;f7=16.00",
"profile" : "x15"
},
{
"name" : "WF x11 f",
"url" : "stratum+tcp://sea.wafflepool.com:3331",
"user" : "btc adress",
"pass" : "d=0.32",
"profile" : "x11"
}
],
"profiles": [
{
"name": "x15",
"algorithm": "bitblockold",
"intensity": "15",
"worksize": "64",
"gpu-engine": "725,725",
"gpu-memclock" : "1000,1000",
"gpu-threads": "2",
"gpu-fan": "60,60"
},
{
"name": "x13",
"algorithm": "marucoin-modold",
"intensity": "15",
"worksize": "64",
"gpu-engine": "725,725",
"gpu-memclock" : "1000,1000",
"gpu-threads": "2",
"gpu-fan": "60,60"
},
{
"name": "x11",
"algorithm": "darkcoin",
"intensity": "15",
"worksize": "64",
"gpu-engine": "725,725",
"gpu-memclock" : "1000,1000",
"gpu-threads": "2",
"gpu-fan": "60,60"
}
],
"failover-only": true,
"gpu-vddc" : "1.050,1.050",
"gpu-powertune" : "0",
"temp-cutoff": "95",
"temp-overheat": "90",
"temp-target": "80",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-memdiff": "0",
"shares": "0",
"kernel-path": "/usr/local/bin",
"api-allow": "W:127.0.0.1,192.168.1.4",
"api-listen": true,
"api-mcast-port": "4028",
"api-port": "4028",
"hotplug" : "5",
"expiry": "1",
"failover-switch-delay": "60",
"gpu-dyninterval": "7",
"gpu-platform": "-1",
"hamsi-expand-big": "1",
"log": "5",
"no-pool-disable": true,
"no-client-reconnect": true,
"queue": "0",
"scan-time": "1",
"no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30",
"show-coindiff" : true,
"extranonce-subscription" : true,
"tcp-keepalive": "30",
"temp-hysteresis": "3"
} |
|
|
|
|
|
|
reza_abay
Member
Offline
Activity: 94
Merit: 10
|
|
August 03, 2014, 05:41:37 PM |
|
I use 13.12 ati driver version |
|
|
|
|
|
Blago
|
|
August 03, 2014, 05:47:10 PM |
|
AMD-Catalyst- 14.6-Beta-V1.0-Windows-May23: amdocl64.dll file version: 10.0.1.1526.3AMD-Catalyst- 14.6-RC2-Windows-June23: amdocl64.dll file version: 10.0.1.1526.3have same hashrate.  |
Relax, I’m russian!...
BURST-B2LU-SGCZ-NYVS-HZEPK
|
|
|
griffga
Member
Offline
Activity: 76
Merit: 10
|
|
August 03, 2014, 08:05:46 PM |
|
after an hour of observation. here's what i got. im having a DEAD gpu. i wonder what's the problem. lower your intensity... try 16 or 17 rejects should drop and hash rate will probably increase as well if you still get sick cards then maybe you pushed your gpu/mem clocks too high assuming you overclocked your cards Have you tried using the new xintensity settings? For me, I've found that it offers a higher sense of control over the thread count and you can get misbehaving cards back online without losing as much hashrate on your others if you just want to keep global settings for all cards. |
|
|
|
|
|
Blisk
|
|
August 03, 2014, 08:57:26 PM |
|
I still get disconnection from pool with sgminer 4.2.2
|
|
|
|
SavageWS6
Member
Offline
Activity: 99
Merit: 10
|
|
August 03, 2014, 09:30:34 PM |
|
I'm still lost on my config atm. I know I'm overlooking it, but not sure what. Here it is {
"pools" :
[
{
"name" : "x13 multi",
"url" : "stratum+tcp://east02.us.trademybit.com:4011",
"user" : "x",
"pass" : "x",
"profile" : "x13",
"algorithm": "marucoin-mod"
},
{
"name" : "x11 multi",
"url" : "stratum+tcp://east02.us.trademybit.com:4010",
"user" : "x",
"pass" : "x",
"profile" : "x11",
"algorithm": "darkcoin-mod"
},
{
"profiles" :
[
{
"name": "x13",
"algorithm": "marucoin-mod",
"device" : "0,1,2,3",
"xintensity" : "66,56,56,56",
"worksize": "64",
"gpu-engine" : "1130,1130,1130,1110",
"gpu-memclock" : "1300,1300,1300,1300",
"gpu-threads": "2",
"gpu-fan" : "75,60,60,60"
},
{
"name": "x11",
"algorithm": "darkcoin-mod",
"device" : "0,1,2,3",
"intensity" : "18,17,17,17",
"worksize" : "256,128,128,128",
"gpu-engine" : "1130,1130,1130,1110",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-threads": "2",
"gpu-fan" : "75,60,60,60"
}
],
"show-coindiff" : true,
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"api-mcast-port" : "4028",
"expiry" : "1",
"queue" : "0",
"scan-time" : "1",
"hamsi-expand-big" : "1",
"hamsi-short" : true,
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30"
}
JSONlist says the error is right at the end Parse error on line 59: ...lay": "30" } ----------------------^ Expecting '}', ',', ']' "no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30"
} I thought I closed off all my brackets? I did try "include" : "profile.conf" but it wouldn't ever load it, and default right to Scrypt-N kernel |
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ
MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
|
badman74
|
|
August 04, 2014, 12:28:55 AM |
|
I'm still lost on my config atm. I know I'm overlooking it, but not sure what. Here it is {
"pools" :
[
{
"name" : "x13 multi",
"url" : "stratum+tcp://east02.us.trademybit.com:4011",
"user" : "x",
"pass" : "x",
"profile" : "x13",
"algorithm": "marucoin-mod"
},
{
"name" : "x11 multi",
"url" : "stratum+tcp://east02.us.trademybit.com:4010",
"user" : "x",
"pass" : "x",
"profile" : "x11",
"algorithm": "darkcoin-mod"
},
{
"profiles" :
[
{
"name": "x13",
"algorithm": "marucoin-mod",
"device" : "0,1,2,3",
"xintensity" : "66,56,56,56",
"worksize": "64",
"gpu-engine" : "1130,1130,1130,1110",
"gpu-memclock" : "1300,1300,1300,1300",
"gpu-threads": "2",
"gpu-fan" : "75,60,60,60"
},
{
"name": "x11",
"algorithm": "darkcoin-mod",
"device" : "0,1,2,3",
"intensity" : "18,17,17,17",
"worksize" : "256,128,128,128",
"gpu-engine" : "1130,1130,1130,1110",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-threads": "2",
"gpu-fan" : "75,60,60,60"
}
],
"show-coindiff" : true,
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-port" : "4028",
"api-mcast-port" : "4028",
"expiry" : "1",
"queue" : "0",
"scan-time" : "1",
"hamsi-expand-big" : "1",
"hamsi-short" : true,
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30"
}
JSONlist says the error is right at the end Parse error on line 59: ...lay": "30" } ----------------------^ Expecting '}', ',', ']' "no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30"
} I thought I closed off all my brackets? I did try "include" : "profile.conf" but it wouldn't ever load it, and default right to Scrypt-N kernel here is the fix {
"pools": [
{
"name": "x13 multi",
"url": "stratum+tcp://east02.us.trademybit.com:4011",
"user": "x",
"pass": "x",
"profile": "x13",
"algorithm": "marucoin-mod"
},
{
"name": "x11 multi",
"url": "stratum+tcp://east02.us.trademybit.com:4010",
"user": "x",
"pass": "x",
"profile": "x11",
"algorithm": "darkcoin-mod"
}
],
"profiles": [
{
"name": "x13",
"algorithm": "marucoin-mod",
"device": "0,1,2,3",
"xintensity": "66,56,56,56",
"worksize": "64",
"gpu-engine": "1130,1130,1130,1110",
"gpu-memclock": "1300,1300,1300,1300",
"gpu-threads": "2",
"gpu-fan": "75,60,60,60"
},
{
"name": "x11",
"algorithm": "darkcoin-mod",
"device": "0,1,2,3",
"intensity": "18,17,17,17",
"worksize": "256,128,128,128",
"gpu-engine": "1130,1130,1130,1110",
"gpu-memclock": "1500,1500,1500,1500",
"gpu-threads": "2",
"gpu-fan": "75,60,60,60"
}
],
"show-coindiff": true,
"api-listen": true,
"api-allow": "W:127.0.0.1",
"api-port": "4028",
"api-mcast-port": "4028",
"expiry": "1",
"queue": "0",
"scan-time": "1",
"hamsi-expand-big": "1",
"hamsi-short": true,
"no-pool-disable": true,
"no-client-reconnect": true,
"no-submit-stale": true,
"no-restart": true,
"failover-switch-delay": "30"
}
|
|
|
|
|
|
badman74
|
|
August 04, 2014, 01:33:40 AM |
|
I have a new binary for everyone to try. I modded the develop branch and added some more optimizations from lazybear branch now running at 6.04mh/s on x11 Almost all algo's were tweaked one way or another so please try the mod link in my sig and get back to me if there is problems If all goes well i will send a pull request to get it added to the main branch If you want to build yourself it can be found at git clone -b test git://github.com/badman74/sgminer.git |
|
|
|
|
|
platinum4
|
|
August 04, 2014, 03:12:30 AM
Last edit: August 04, 2014, 01:35:06 PM by platinum4 |
|
@badman74 these appear to work; it remains to be seen whether compact blake inhibits nist5 or not, but so far no crashes; I haven't tested on x11 as the profitability is in the dumps because of the addition of westhash
Nevermind, I think if you set keccak unroll to 8 it works a tad bit better.
EDIT:
Yeah, you need to remove the if statement for compact blake in nist5; it's a 1% decrease.
|
|
|
|
|
|
badman74
|
|
August 04, 2014, 12:05:13 PM |
|
@badman74 these appear to work; it remains to be seen whether compact blake inhibits nist5 or not, but so far no crashes; I haven't tested on x11 as the profitability is in the dumps because of the addition of westhash
Nevermind, I think if you set keccak unroll to 8 it works a tad bit better.
After work I will check to see if all the other algo's still work. Also will check to see if the change to groestl.cl is still needed. If no problems are found I will do a pull request. |
|
|
|
|
|
badman74
|
|
August 04, 2014, 01:40:08 PM |
|
@badman74 these appear to work; it remains to be seen whether compact blake inhibits nist5 or not, but so far no crashes; I haven't tested on x11 as the profitability is in the dumps because of the addition of westhash
Nevermind, I think if you set keccak unroll to 8 it works a tad bit better.
EDIT:
Yeah, you need to remove the if statement for compact blake in nist5; it's a 1% decrease.
Ok |
|
|
|
|
|
