[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[platinum4]

You can't use auto-gpu with 14.7, but you can set memory.  I do think you have to have some setting flipped in MSI AB though.

[1714737309]

1714737309

[1714737309]

1714737309

[1714737309]

1714737309

[NoTToN]

anyone can help me out? im getting this everytime i try to run sgminer. i wonder what is the problem.

http://i8.photobucket.com/albums/a16/altaizen/1_zpsec22da3c.png[/URL]

i used the default configuration for x11 & x13 in nicehash.

[go6ooo1212]

Show your command line , and we'll see whats wrong ...

[NoTToN]

im using this commands. and im using Sapphire 280x Toxic

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "BTC",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "BTC",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
}

[Blisk]

anyone can help me out? im getting this everytime i try to run sgminer. i wonder what is the problem.

[/URL]

i used the default configuration for x11 & x13 in nicehash.

you proobably misse some comma in teh conf file, at the end there must be not.
Check default conf file of sgminer.
Or you have something wrong or missing in conf file.

as i said here must be not comma at the end
"shaders" : "0",

[NoTToN]

anyone can help me out? im getting this everytime i try to run sgminer. i wonder what is the problem.

http://i8.photobucket.com/albums/a16/altaizen/1_zpsec22da3c.png[/URL]

i used the default configuration for x11 & x13 in nicehash.

you proobably misse some comma in teh conf file, at the end there must be not.
Check default conf file of sgminer.
Or you have something wrong or missing in conf file.

as i said here must be not comma at the end
"shaders" : "0",

i already remove the comma at the end of "shaders", i now have this config. and still cant get the miner run.

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0"
"gpu-threads" : "4",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[Blisk]

you really didn't check your con file
now you mis here comma
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",    <-
"gpu-threads" : "4",

it is logic where comma must be and where not

[NoTToN]

you really didn't check your con file
now you mis here comma
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",    <-
"gpu-threads" : "4",

it is logic where comma must be and where not

i already tried to remove the comma and run the miner, and i already also tried to put comma and run the miner. both have the same result.

http://i8.photobucket.com/albums/a16/altaizen/1_zpsec22da3c.png[/URL]

[bullus]

you really didn't check your con file
now you mis here comma
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",    <-
"gpu-threads" : "4",

it is logic where comma must be and where not

i already tried to remove the comma and run the miner, and i already also tried to put comma and run the miner. both have the same result.

[/URL]

I tried your config and u miss what Blisk already said
"shaders" : "0",    <-

and download the latest sgminer_v5!

[badman74]

anyone can help me out? im getting this everytime i try to run sgminer. i wonder what is the problem.

[/URL]

i used the default configuration for x11 & x13 in nicehash.

you proobably misse some comma in teh conf file, at the end there must be not.
Check default conf file of sgminer.
Or you have something wrong or missing in conf file.

as i said here must be not comma at the end
"shaders" : "0",

i already remove the comma at the end of "shaders", i now have this config. and still cant get the miner run.

Code:

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0"
"gpu-threads" : "4",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

there must be a comma at "shaders" : "0",

Code:

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "4",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

next time run it though  this site http://jsonlint.com/

[JuanHungLo]

Why do you have:

"failover-switch-delay" : "300",
...
"failover-switch-delay" : "60",

listed twice??

[badman74]

Why do you have:

"failover-switch-delay" : "300",
...
"failover-switch-delay" : "60",

listed twice??

he most likely didn't see the second one
in this case it would still work but use the setting on the last one

[NoTToN]

anyone can help me out? im getting this everytime i try to run sgminer. i wonder what is the problem.

http://i8.photobucket.com/albums/a16/altaizen/1_zpsec22da3c.png[/URL]

i used the default configuration for x11 & x13 in nicehash.

you proobably misse some comma in teh conf file, at the end there must be not.
Check default conf file of sgminer.
Or you have something wrong or missing in conf file.

as i said here must be not comma at the end
"shaders" : "0",

i already remove the comma at the end of "shaders", i now have this config. and still cant get the miner run.

Code:

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0"
"gpu-threads" : "4",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

there must be a comma at "shaders" : "0",

Code:

{
"pools" : [
     {
          "name" : "NiceHash_X11_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4336",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     },
     {
          "name" : "NiceHash_X13_auto-switch",
          "url" : "stratum+tcp://stratum.nicehash.com:4337",
          "user" : "1KetVvF2Wt7hKYYHnbLzk5MPCbFUd4pcDa",
          "pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=0;f7=0",
          "nfactor" : "10",
          "algorithm" : "marucoin-mod"
     },
     {
          "name" : "some third-party X11 backup pool",
          "url" : "stratum+tcp://x11-backup-pool:3333",
          "user" : "user",
          "pass" : "pass",
          "nfactor" : "10",
          "algorithm" : "darkcoin-mod"
     }
],
"failover-only" : true,
"failover-switch-delay" : "300",
"queue" : "0",
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "4",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

next time run it though  this site http://jsonlint.com/

Thanks for that link, its very useful. got a valid JSON now.

http://i8.photobucket.com/albums/a16/altaizen/2_zpse881860c.png

but... this is what im getting now after i run the miner

http://i8.photobucket.com/albums/a16/altaizen/1_zpsc2944626.png

[bullus]

Make a bat file that use your config file, don't doubleclick using sgminer.exe

like this
sgminer.exe --config yourconfig.conf

[badman74]

Thanks for that link, its very useful. got a valid JSON now.

but... this is what im getting now after i run the miner

if you are using a p2pool for backup try adding this to its pool section
"no-extranonce" : true,
also "nfactor" : "10", is unnecessary it only needs specified if it is gonna be something other than 10

[bullus]

He's using sgminer.exe to start..

[badman74]

He's using sgminer.exe to start..

you can do that aslong as the conf is named sgminer.conf it will load it anyway

[bullus]

He's using sgminer.exe to start..

you can do that aslong as the conf is named sgminer.conf it will load it anyway

Then he need to rename it. I have tested his config and config is ok(besides some settings)..so there is another problem.

[NoTToN]

Make a bat file that use your config file, don't doubleclick using sgminer.exe

like this
sgminer.exe --config yourconfig.conf

i tried your advise, and its already running man! thanks alot! but it seems the WU is too low, maybe ill observe it for next few hours

http://i8.photobucket.com/albums/a16/altaizen/3_zps6e9984e3.png

[bullus]

Just search for some settings for your 280x..I get 3650kh/s for x11 ,7950.
Glad it is working now  

edit ah you are hashing x13..don't know what hashrate I get with x13..