[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[morfey911]

to Badman74
i found a bug on your newest modded sgminer.
http://cdn.joxi.ru/uploads/prod/2014/08/11/947/bf9/5729edcede3b691a7ebe27acd1e98ff62fb7b2fd.jpg
No accepted shares, at least for 10 minutes (after that my cgwatcher restarted sgminer). Tried on different pools. Algo: myriad-groestl.

[1714737898]

1714737898

[bullus]

Why are jackpot or cryptonight not in the kernels yet?

[cgladue]

Is there a build on the 5.0 branch that supports LUFFA512 (doomcoin) ?

[badman74]

to Badman74
i found a bug on your newest modded sgminer.

No accepted shares, at least for 10 minutes (after that my cgwatcher restarted sgminer). Tried on different pools. Algo: myriad-groestl.

ok i will look into it when i get a chance

[cgladue]

badman, is there any builds that support doomcoin and whirlpool kernels yet ?

[badman74]

badman, is there any builds that support doomcoin and whirlpool kernels yet ?

Whirlpool has been added to my develop branch if you can build yourself otherwise you will have to wait till I can get home and update my mod build

As for doomcoin I don't know anything about it

[cgladue]

badman, is there any builds that support doomcoin and whirlpool kernels yet ?

Whirlpool has been added to my develop branch if you can build yourself otherwise you will have to wait till I can get home and update my mod build

As for doomcoin I don't know anything about it

doomcoin is luffa512

[jch9678]

honestly i am not sure what is going on there, i have never been able to get more than 4 cards to work for me
although you may try setting them all to I 16 and see if that helps
i dont really see anything else wrong with your config

Thanks for getting back to me.  I'll try setting them to I 16 and see what happens but it may be a while.  I was getting clSetKernelArg errors with the nightly builds also a week or so ago.  I'll try the new nightly builds and see if I get those same errors.  It seemed to only happen when I tried the multi-algo switching.  To keep the cards stable I'm using one of the nightly builds with 1 gpu thread, xI 140, and worksize 256.  This gives me stable 5.4 mh/s for x11 with default clocks.  So it looks like you can use higher intensity and bigger worksize with 1 thread, maybe that's obvious though, I dunno.  These are reference cards too.  I'm sure I can get a better hashrate using 1 thread with some clock optimization and tweaking the xI. 

I'm not sure if you couldn't get windows to recognize 4 cards or get them mining at the same time, but if it was the former you should check out lbr's modified drivers.

Thanks for your help.

[badman74]

badman, is there any builds that support doomcoin and whirlpool kernels yet ?

Whirlpool has been added to my develop branch if you can build yourself otherwise you will have to wait till I can get home and update my mod build

As for doomcoin I don't know anything about it

doomcoin is luffa512

new mod binary is up in my sig
whirlcoin algo added, and myriadcoin-groestl fixed (don't know if it will be any faster as i had to remove most of the optimization till i can figure out what was wrong)

i would add doomcoin but it will take some major conversion to import it from sph-sgminer to the new sgminer
and i don't really know enough to easily do that

[bullus]

What about jackpotcoin and cryptonight  ?

[platinum4]

What about jackpotcoin and cryptonight  ?

I know, ystarnaud still hasn't closed those issues yet...

[ozzy1926]

badman, is there any builds that support doomcoin and whirlpool kernels yet ?

Whirlpool has been added to my develop branch if you can build yourself otherwise you will have to wait till I can get home and update my mod build

As for doomcoin I don't know anything about it

doomcoin is luffa512

new mod binary is up in my sig
whirlcoin algo added, and myriadcoin-groestl fixed (don't know if it will be any faster as i had to remove most of the optimization till i can figure out what was wrong)

i would add doomcoin but it will take some major conversion to import it from sph-sgminer to the new sgminer
and i don't really know enough to easily do that

thanks, i got your 290 config but one 290 in my rig needs +44mV to be stable @1075 where others run +0mV.Does that mean +44mV one will die soon?

[DragonSlayer]

Anyone ever get this version working with local P2Pool using scrypt-n?

for p2pools put "no-extranonce" : true, in the pool config
like this

"pools" : [
   {
      "name" : "X11P2P.com",
      "url" : "http://x11p2p.com:7903",
      "user" : "XvRs67Wnw1n1Kwtq4ihhTpv699DdJpxdnt+.02",
      "pass" : "x",
      "priority" : "0",
      "no-extranonce" : true,
      "profile": "x11"
   },

Thanks for the information.  It still does not work.  Here is is the none working config.

Code:

{
"pools" : [
	{
		"name" : "p2pool",
		"url" : "http://192.168.1.4:9172",
		"user" : "Vv8DSRtwKwYsFdaskKHLyAPvtNiVEoUaYp",
		"pass" : "1234",
		"priority" : "0",
		"no-extranonce" : true,
		"profile": "nscrypt"
	}
],
"profiles" : [
	{
		"name" : "nscrypt",
		"lookup-gap" : "2",
		"algorithm" : "psw",
		"nfactor" : "11"
	}
],

"scrypt" : true,
"kernel" : "psw",
"xintensity" : "4",
"worksize" : "256",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"log-file" : "output.log",

"gpu-platform" : "1",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",

"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",

"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,

"kernel-path" : "/usr/local/bin"

}

Same settings but works with a regular pool.

Code:

{
"pools" : [
	{
		"name" : "ltc.give-me-coins.com",
		"url" : "stratum+tcp://vtc.give-me-coins.com:3337",
		"user" : "KlaianDragon.Klaian",
		"pass" : "1234",
		"priority" : "0",
		"no-extranonce" : true,
		"profile": "nscrypt"
	}
],
"profiles" : [
	{
		"name" : "nscrypt",
		"lookup-gap" : "2",
		"algorithm" : "psw",
		"nfactor" : "11"
	}
],

"scrypt" : true,
"kernel" : "psw",
"xintensity" : "4",
"worksize" : "256",
"shaders" : "2048",
"failover-only" : true,
"no-submit-stales" : true,
"lookup-gap" : "2,",
"auto-fan" : true,
"log-file" : "output.log",

"gpu-platform" : "1",
"gpu-engine" : "1020",
"gpu-memclock" : "1500",
"gpu-threads" : "2",

"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "72",
"temp-hysteresis" : "3",

"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"api-network" : true,

"kernel-path" : "/usr/local/bin"

}

[DMaster2008]

A problem with bitblock.cl (x15) in modded sgminer.

[badman74]

A problem with bitblock.cl (x15) in modded sgminer.

well crap... will have to work on that i broke it when i added whirlcoin
drop the old version of whirlpool.cl into it and it should work as long as you dont try to use whirlcoin

[Zels]

Can you look too at stat in sgminer ?

When sgminer switch from 2 pool on the same Algo, stat are not reset and keep rissing but when switch between 2 algo stat are reset and correct

As you see, mining time, number of accepted are not reset even if sgminer have switch multi time here 

[platinum4]

Prolly cuz u got that fancy ass readout thing.

[Zels]

Stats come from Sgminer, nothing to do with what i use to get them, they're the same in sgminer, cgwatcher, php script.

[cryptocoinnl]

He Guys,

Been trying to get the best out of my 280x cards.
Updated to catalyst 14 and using the newest sgminer from this thread.

but.. not getting it higher than 3.150M with each card mining X11.
Anybody some good advice / good config for 280x card?

My settings:

Code:

	"name" : "x11",
		"algorithm" : "darkcoin-mod",
		"xintensity" : "50",
		"worksize": "64",
		"gpu-engine": "1040",
		"gpu-memclock": "1500",
		"gpu-fan" : "80-100"

Code:

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"gpu-threads" : "2",
"temp-target" : "88",
"temp-overheat" : "92",
"temp-cutoff" : "96",
"blake-compact" : true,
"keccak-unroll" : "8",
"luffa-parallel" : true,
"include" : "profiles.conf"

thanks in advance

[B.T.Coin]

He Guys,

Been trying to get the best out of my 280x cards.
Updated to catalyst 14 and using the newest sgminer from this thread.

but.. not getting it higher than 3.150M with each card mining X11.
Anybody some good advice / good config for 280x card?

Did you delete your old .bin files after upgrading your catalyst?
I assume you upgraded to 14.6 or 14.7 and not 14.3