Claymore's CryptoNote AMD GPU Miner v11.3

[psyblanc]

Yes please add cryptonight heavy

[leonix007]

Yes please add cryptonight heavy

Please Read, Claymore already stated that he has no time for other algo

Since I use assembler it will take a lot of time to implement all these changes and I don't have enough time currently. I implemented pow7 but for other forks you should use other miners.

use other miners out there instead, rather than keeping this kind of request repeatedly

[MaxMidnite]

Using -pow7 1 I got lower hashrate?
Is this dependent on pool or the miner itself?

[Jegu.Samana]

We need another update, intense coin forked.

What kind of update do you need for Intense? At the moment it can be mined by using pow7 option.

[zafa]

Hey Claymore, please add fee again and support heavy. I dont wanna use other miners. Please...

[ffermerr]

It is unfortunate that there is no support for all algorithms. I liked the miner manager so much. I do not want other miners

[MaxMidnite]

We need another update, intense coin forked.

What kind of update do you need for Intense? At the moment it can be mined by using pow7 option.

Its been fixed now, thanks..

I wish Claymore would come back and support this further like the cast XMR miner.
I get best hashrate with Claymore, others cannot match him..
Please update this further..

[Fast_cris]

We need another update, intense coin forked.

What kind of update do you need for Intense? At the moment it can be mined by using pow7 option.

Its been fixed now, thanks..

I wish Claymore would come back and support this further like the cast XMR miner.
I get best hashrate with Claymore, others cannot match him..
Please update this further..

i agree... put devfee again...

[UAGet]

I wish Claymore would come back and support this further like the cast XMR miner.

With Claymore for my GPU (RX 560 2Gb) 495 h/s, with SRBMiner 515 h/s.

[zeef]

Any flag for sumokoin and crypto heavy?
?

Regards

[UAGet]

Any flag for sumokoin and crypto heavy?

Try SRBMiner.

[aaronwashere]

Hey! I can't seem to get my R9 270 to detect (getting 0 hashs). And i want to implement the:

"This is POOL version.
Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100 "

but im using Simple Mining OS, and i dont know where to edit the variables...

Thanks!

[Call_Me_Bambi]

Hey! I can't seem to get my R9 270 to detect (getting 0 hashs). And i want to implement the:

"This is POOL version.
Set the following environment variables, especially if you have 1-2GB cards:

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100 "

but im using Simple Mining OS, and i dont know where to edit the variables...

Thanks!

Claymore's miners have two file locations where you can add the various mining parameters:
1) config.txt
2) start.bat

I use the 'start.bat' file only, below is an example of what should be there (put a # in front of all lines in the 'config.txt' file, this will disable those lines being run).

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool stratum+tcp://stellite.ingest.cryptoknight.cc:16221 -xwal Se2YMR4k7aPAr6AaU18weMLZUMUKitR2q3K9kLLvj8oJ79DG6UMpGkcaUA3B68gcfPUb868QhWUcicb8uYohRX5v1VDzK6J7k -xpsw x -pow7 1 -ftime 5 -mport 0 -r 1

Some people like to have only the basic start command in the 'start.bat' file and use the 'config.txt' file to control the mining parameters.
See OP about "CONFIGURATION FILE" settings.

[Madcard]

Hey Claymore, please add fee again and support heavy. I dont wanna use other miners. Please...

Пpиcoeдиняюcь...

Moжнo дaжe c devfee...

[nitrobg]

Go to SRBMiner and stop crying. Claymore's miner is abandoned, he said it himself.

[leonix007]

please comback claymore with all change new algo cn 😭 i have used other software miner like srb, xmr-stak all make my rig crash for long time

Simply you could go to SRBMiner and XMR-Stak Thread and seek help for crashing things

rather than crying, All others users on that thread successfully done doing setups on their rigs, so probably there is only prob on your rig and not the miner.

[aalrwais]

Good morning everyone
I am mining DSH for a while on Democats.org, the problem I been using HITBTC.com DSH address in the miner because I been having problems with DSH CLI and the old GUI Desktop wallets, now Democats.org keep showing I have pending payment and they never send my coins to Hitbtc till this day so they still on their pool, is there a way I can recover these coins I contacted Democats support twice but no one home, I want to redirect these coins to a desktop wallet or an exchange?! Thanks

[ermis1975]

I have problem. System crashes after 2 min, when I try to mine XMR with Claymore 11.3.

[caeltrade]

Hi
Thanks very much. Will try this out.

[ccminer.net]

mining MONERO v7 since a while with no issues.

Today I updated windows 10, and I noticed that my miners are mining with half of their power.

Anyone faced the same problem? Do you have a solution?

Thx