pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 09:35:59 AM |
|
-edit- also forgot to mention that i even hit the reset button while unplugged and now i cant access the login screen, please tell me there is hope..or if im just a noob thats boned out on luck....please be honest sorry for poor format i need to work on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) SGT You most likely had one of the older S3's that do not revert to DHCP when reset. Look for the S3 on your network as it most likely has reverted to a static IP by doing the reset (the earlier ones had 192.168.1.99 as the default so you can try and browse to that too).
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 09:39:27 AM |
|
-edit- also forgot to mention that i even hit the reset button while unplugged and now i cant access the login screen, please tell me there is hope..or if im just a noob thats boned out on luck....please be honest sorry for poor format i need to work on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) SGT You most likely had one of the older S3's that do not revert to DHCP when reset. Look for the S3 on your network as it most likely has reverted to a static IP by doing the reset (the earlier ones had 192.168.1.99 as the default so you can try and browse to that too). ok thats the thing, i looked it up on my local network and the page started to load and then failed to load
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 09:47:54 AM |
|
-edit- also forgot to mention that i even hit the reset button while unplugged and now i cant access the login screen, please tell me there is hope..or if im just a noob thats boned out on luck....please be honest sorry for poor format i need to work on it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) SGT You most likely had one of the older S3's that do not revert to DHCP when reset. Look for the S3 on your network as it most likely has reverted to a static IP by doing the reset (the earlier ones had 192.168.1.99 as the default so you can try and browse to that too). ok thats the thing, i looked it up on my local network and the page started to load and then failed to load If it failed to load with an error, then your S3 shipped with the faulty firmware (and I assume the page that failed to load is the miner status page). If that is the case, then you have two options. 1. update the firmware with one from the bitmain site (do this via the ui) 2. update cgminer with kano's latest (this is my recomended route but you have to do this via SSH).
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 09:54:42 AM |
|
so i just went through a rather rushed move and had to pack up right after the failure, so i unhooked the psu from the pc and i did fry a port on the psu, one of the hdd ports. I know where i went wrong now, but what i wanna know is my miner ok? im setting it up right now so i will update once i get it booted up
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 09:59:23 AM |
|
so i just went through a rather rushed move and had to pack up right after the failure, so i unhooked the psu from the pc and i did fry a port on the psu, one of the hdd ports. I know where i went wrong now, but what i wanna know is my miner ok? im setting it up right now so i will update once i get it booted up
It does take quite a bit to properly fry these things ..... but of course I am not psychic enough to know for sure what the state of your S3 is, but I can hazard an educated guess that it is actually OK (the panic that engulfed you was just that, panic).
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 10:16:46 AM |
|
so i just went through a rather rushed move and had to pack up right after the failure, so i unhooked the psu from the pc and i did fry a port on the psu, one of the hdd ports. I know where i went wrong now, but what i wanna know is my miner ok? im setting it up right now so i will update once i get it booted up
It does take quite a bit to properly fry these things ..... but of course I am not psychic enough to know for sure what the state of your S3 is, but I can hazard an educated guess that it is actually OK (the panic that engulfed you was just that, panic). yea, like i said i was able to look at the s3 board and nothing was singed, bulged, or warped, discolored, just the other blade wont power on. If im looking at the lan port the left blade is working and the right blade isnt. Plugged into each side one at a time with 2 6pins right side again, front fan spurt and nothing. Returning back to left side it boots up but, for the life of me i cannot get a hold of my room mate to get the local router ip. So i am in a bit of a stand still.
|
Getting it all sorted out, I think.....
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 10:29:53 AM |
|
update, the top light is red and i cannot find it in my network, reset button while on?
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 10:51:05 AM |
|
update, the top light is red and i cannot find it in my network, reset button while on?
First, get the IP of your computer. If it is in the 192.168.xx.xx range try 192.168.1.99 (the old static default ip) else you'll have to get a network-scanner.
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:07:13 AM |
|
Got into the router finally!!! Yay! BUT, the s3 inst showing up, when booting (s3) the lan status light on the port itself blinks twice and then the top red light blinks a bunch of times slowly and then stays constant
|
Getting it all sorted out, I think.....
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:21:36 AM |
|
update, the top light is red and i cannot find it in my network, reset button while on?
First, get the IP of your computer. If it is in the 192.168.xx.xx range try 192.168.1.99 (the old static default ip) else you'll have to get a network-scanner. connection timed out
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:22:43 AM |
|
Got into the router finally!!! Yay! BUT, the s3 inst showing up, when booting (s3) the lan status light on the port itself blinks twice and then the top red light blinks a bunch of times slowly and then stays constant
If all fails in finding the S3 on the router, then you'll have to connect it directly to your laptop / computer, but you need to have the computer disconnected from the network (ethernet and/or WIFI). You can then browse to the S3 for the single task of turning its network to DHCP. As soon as that is done, you'll then have to reconnect both the S3 aand the computer to the network / router and find the S3 there.
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:48:09 AM |
|
Got into the router finally!!! Yay! BUT, the s3 inst showing up, when booting (s3) the lan status light on the port itself blinks twice and then the top red light blinks a bunch of times slowly and then stays constant
If all fails in finding the S3 on the router, then you'll have to connect it directly to your laptop / computer, but you need to have the computer disconnected from the network (ethernet and/or WIFI). You can then browse to the S3 for the single task of turning its network to DHCP. As soon as that is done, you'll then have to reconnect both the S3 aand the computer to the network / router and find the S3 there. that did not work
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:49:27 AM |
|
Got into the router finally!!! Yay! BUT, the s3 inst showing up, when booting (s3) the lan status light on the port itself blinks twice and then the top red light blinks a bunch of times slowly and then stays constant
If all fails in finding the S3 on the router, then you'll have to connect it directly to your laptop / computer, but you need to have the computer disconnected from the network (ethernet and/or WIFI). You can then browse to the S3 for the single task of turning its network to DHCP. As soon as that is done, you'll then have to reconnect both the S3 aand the computer to the network / router and find the S3 there. that did not work I am out! Hopefully someone with more knowledge can help you out.
|
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:50:34 AM |
|
Got into the router finally!!! Yay! BUT, the s3 inst showing up, when booting (s3) the lan status light on the port itself blinks twice and then the top red light blinks a bunch of times slowly and then stays constant
If all fails in finding the S3 on the router, then you'll have to connect it directly to your laptop / computer, but you need to have the computer disconnected from the network (ethernet and/or WIFI). You can then browse to the S3 for the single task of turning its network to DHCP. As soon as that is done, you'll then have to reconnect both the S3 aand the computer to the network / router and find the S3 there. that did not work I am out! Hopefully someone with more knowledge can help you out. thank you anyways much appreciated
|
Getting it all sorted out, I think.....
|
|
|
SGTxSTAYxGRIND
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 115
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 11:54:51 AM |
|
This is just a hunch but i could be something wrong with the controller board? and if so do they sell replacements still?
|
Getting it all sorted out, I think.....
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 12:03:30 PM |
|
This is just a hunch but i could be something wrong with the controller board? and if so do they sell replacements still?
It takes some testing to establish it is the controller that's gone .... and that would not stop you from accessing the rig anyway. You can also "try" and get a replacement one from what is left of bitmain support (crap service IMHO but depends on what region you are, I am in the UK and they are hopeless!). I once got quoted a price of $25 plus $5 shipping .....
|
|
|
|
hodedowe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 02:02:05 PM |
|
If you mean the "Diff" column that was on there twice ( "LSDiff" = "Diff" )? Yeah I removed it coz it was duplicated ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) My LSDiff shows zero... ![Lips sealed](https://bitcointalk.org/Smileys/default/lipsrsealed.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi61.tinypic.com%2F2m2b79v.jpg&t=665&c=9CVAO5EI1DBjtg)
|
Solo mining is alive and profitable! Helped? Thanks! 1CXRFh4bDVFBsUzoHMMDbTMPcBP14RUTus
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 02:04:30 PM |
|
^^^ You are mining on your last pool which shows an LSDiff of 302
|
|
|
|
hodedowe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 02:13:50 PM |
|
^^^ You are mining on your last pool which shows an LSDiff of 302
This is my solo miner, mining on the first pool in failover mode. The last pool is ck's solo pool, diff on all should be 49.9G
|
Solo mining is alive and profitable! Helped? Thanks! 1CXRFh4bDVFBsUzoHMMDbTMPcBP14RUTus
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 11, 2015, 02:20:17 PM |
|
^^^ You are mining on your last pool which shows an LSDiff of 302
This is my solo miner, mining on the first pool in failover mode. The last pool is ck's solo pool, diff on all should be 49.9G The picture tells a different story. 1st pool is alive but clearly says the rig has Never sent any shares, so it seems to have failed over to the 2nd pool which is dead thus again failed over to the 3rd pool, which is the one being mined at the time of the screenshot (and ever since the miner was switched on 5hrs+ to the screenshot). Your share diff on the solo pool will be adjusted to your rig's speed .... not the network diff.
|
|
|
|
|