Bitcoin Forum
February 26, 2017, 08:09:07 AM *
News: Latest stable version of Bitcoin Core: 0.13.2  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 [209] 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 ... 393 »
  Print  
Author Topic: Pictures of your mining rigs!  (Read 1662424 times)
Jay_Pal
Legendary
*
Offline Offline

Activity: 1338



View Profile
December 09, 2013, 04:09:48 PM
 #4161

My current rig in the morning sun today  Cool

That's 2x BFL 60 Gh/s and 2x BFL 7 Gh/s, all with new arctic cooling fans. I also have 30x usb erupters (not pictured), totalling 144 Gh/s now heating my room.

(previous post about this rig here: https://bitcointalk.org/index.php?topic=7216.msg2999470#msg2999470)



Anyone walking pass, realizes that its mining gear, they will have it in a flash, even though they might have to make arrangements for a ladder  Roll Eyes

That's risky, i thought of the same thing.

I thought on where to get the ladder!!! Cheesy

Free Coins - 🍒🍉🌼 Free Game🌼🍉🍒
BEST FAUCET EVER!!! - Don't Panic... - 1G8zjUzeZBfJpeCbz1MLTc6zQHbLm78vKc
1488096547
Hero Member
*
Offline Offline

Posts: 1488096547

View Profile Personal Message (Offline)

Ignore
1488096547
Reply with quote  #2

1488096547
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1488096547
Hero Member
*
Offline Offline

Posts: 1488096547

View Profile Personal Message (Offline)

Ignore
1488096547
Reply with quote  #2

1488096547
Report to moderator
1488096547
Hero Member
*
Offline Offline

Posts: 1488096547

View Profile Personal Message (Offline)

Ignore
1488096547
Reply with quote  #2

1488096547
Report to moderator
1488096547
Hero Member
*
Offline Offline

Posts: 1488096547

View Profile Personal Message (Offline)

Ignore
1488096547
Reply with quote  #2

1488096547
Report to moderator
turtle83
Sr. Member
****
Offline Offline

Activity: 322


Supersonic


View Profile WWW
December 09, 2013, 06:34:21 PM
 #4162

My current rig in the morning sun today  Cool

That's 2x BFL 60 Gh/s and 2x BFL 7 Gh/s, all with new arctic cooling fans. I also have 30x usb erupters (not pictured), totalling 144 Gh/s now heating my room.

(previous post about this rig here: https://bitcointalk.org/index.php?topic=7216.msg2999470#msg2999470)



Anyone walking pass, realizes that its mining gear, they will have it in a flash, even though they might have to make arrangements for a ladder  Roll Eyes

That's risky, i thought of the same thing.

I thought on where to get the ladder!!! Cheesy

[WTB] Ladder

pontiacg5
Sr. Member
****
Offline Offline

Activity: 364



View Profile
December 09, 2013, 07:00:55 PM
 #4163

Watercooled quad 7970, mining 3mh/s at 30dB-A, 50-60c  Wink





The plate for RAM heatsinks is not working, have to switch to finned individual chips. Never would have guessed ram chips would get so damn hot!

Please DO NOT send me private messages asking for help setting up GPU miners. I will not respond!!!
crumbs
Full Member
***
Offline Offline

Activity: 210



View Profile
December 09, 2013, 07:07:46 PM
 #4164

You did the machine work?  Looks awesome!
pontiacg5
Sr. Member
****
Offline Offline

Activity: 364



View Profile
December 09, 2013, 07:17:11 PM
 #4165

You did the machine work?  Looks awesome!

Thanks!

Yes, all of the blocks/manifolds were done on a 2 axis knee mill and the "case" was waterjet cut/formed.




Please DO NOT send me private messages asking for help setting up GPU miners. I will not respond!!!
rammy2k2
Legendary
*
Offline Offline

Activity: 1204



View Profile WWW
December 09, 2013, 08:02:51 PM
 #4166

my favorite topic from this forum !  Grin
adnanabbas
Full Member
***
Offline Offline

Activity: 154


View Profile
December 09, 2013, 08:39:41 PM
 #4167

My current rig in the morning sun today  Cool

That's 2x BFL 60 Gh/s and 2x BFL 7 Gh/s, all with new arctic cooling fans. I also have 30x usb erupters (not pictured), totalling 144 Gh/s now heating my room.

(previous post about this rig here: https://bitcointalk.org/index.php?topic=7216.msg2999470#msg2999470)



Anyone walking pass, realizes that its mining gear, they will have it in a flash, even though they might have to make arrangements for a ladder  Roll Eyes

That's risky, i thought of the same thing.

I thought on where to get the ladder!!! Cheesy

ROI on the ladder would be super  Shocked
cryptolaxy
Member
**
Offline Offline

Activity: 87


View Profile
December 09, 2013, 08:49:47 PM
 #4168

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?
pontiacg5
Sr. Member
****
Offline Offline

Activity: 364



View Profile
December 09, 2013, 08:54:25 PM
 #4169

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?

One at a time, get one set up and mining then just unplug the monitor and plug in the second computer. You don't need a monitor to mine.

Please DO NOT send me private messages asking for help setting up GPU miners. I will not respond!!!
cryptolaxy
Member
**
Offline Offline

Activity: 87


View Profile
December 09, 2013, 08:58:47 PM
 #4170

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?

One at a time, get one set up and mining then just unplug the monitor and plug in the second computer. You don't need a monitor to mine.
How do you tackle the GPU's going idle? and also what PSU do you use? and how many PSU do you have installed per mobo?
pontiacg5
Sr. Member
****
Offline Offline

Activity: 364



View Profile
December 09, 2013, 09:19:15 PM
 #4171

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?

One at a time, get one set up and mining then just unplug the monitor and plug in the second computer. You don't need a monitor to mine.
How do you tackle the GPU's going idle? and also what PSU do you use? and how many PSU do you have installed per mobo?

They don't go idle, dealing with that problem hasn't been an issue for a while due to newer drivers. A single 75 ohm resistor in the right place is enough to "dummy" a GPU into running, otherwise. 

What PSU? Any will work, though I suggest you spend money here. Cheap power supplies will cost you more than they save up front. Running two or more per motherboard is not a problem, depends on the PSU prices and line voltage in your area as to which would be the best/cheapest choice (1 or two PSU.)


Please DO NOT send me private messages asking for help setting up GPU miners. I will not respond!!!
cryptolaxy
Member
**
Offline Offline

Activity: 87


View Profile
December 09, 2013, 09:21:34 PM
 #4172

Sweet rig. Where did you get the aluminum extrusions?  Is it 80/20?

Ok, time for a bit of showing off my rig:



5x Sapphire Radeon 7970
3750kHash/sec Litecoin
and blowing the heat right out of the window!

Nice rig!! what kind of fan do you use?
cryptolaxy
Member
**
Offline Offline

Activity: 87


View Profile
December 09, 2013, 09:39:50 PM
 #4173

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?

One at a time, get one set up and mining then just unplug the monitor and plug in the second computer. You don't need a monitor to mine.
How do you tackle the GPU's going idle? and also what PSU do you use? and how many PSU do you have installed per mobo?

They don't go idle, dealing with that problem hasn't been an issue for a while due to newer drivers. A single 75 ohm resistor in the right place is enough to "dummy" a GPU into running, otherwise. 

What PSU? Any will work, though I suggest you spend money here. Cheap power supplies will cost you more than they save up front. Running two or more per motherboard is not a problem, depends on the PSU prices and line voltage in your area as to which would be the best/cheapest choice (1 or two PSU.)



Line voltage in my area is 240v. What do you think about using Enermax platimax 1500W per mobo? Also on close lookup at your gpu, you didn't use any ohm resistor.
Sophokles
Sr. Member
****
Offline Offline

Activity: 446


die-hard GPU miner


View Profile
December 09, 2013, 11:00:19 PM
 #4174

Sweet rig. Where did you get the aluminum extrusions?  Is it 80/20?

Ok, time for a bit of showing off my rig:

http://s7.directupload.net/images/130521/dnui6xui.jpg

5x Sapphire Radeon 7970
3750kHash/sec Litecoin
and blowing the heat right out of the window!

Nice rig!! what kind of fan do you use?

Antec Big Boy 200mm
lenny_
Legendary
*
Offline Offline

Activity: 1036


TORWALLET.COM


View Profile WWW
December 09, 2013, 11:21:20 PM
 #4175

My Christmas mining rig  Grin



SANTA GALLERY HERE  Grin

(This rig is part of my project - ASICminer.pl, where we are selling 3-year long cloud mining contracts)

ANONYMOUS BITCOIN WALLET -->>> https://TorWallet.com
pontiacg5
Sr. Member
****
Offline Offline

Activity: 364



View Profile
December 10, 2013, 12:17:45 AM
 #4176

How is my new baby?





Nice!!! I like it!
What are the difference when the upper fans turned on or off in temperature?
I was wondering to do that but not sure of the results, as every fan I put in my gear no matter where, it only make it worse.


This rig is a beauty. planning on building something similar. just two questions:
- You used two mobo on this rig. does that mean they are connected to two monitors?
- If they aren't, how do you connect both mobo to one monitor?

One at a time, get one set up and mining then just unplug the monitor and plug in the second computer. You don't need a monitor to mine.
How do you tackle the GPU's going idle? and also what PSU do you use? and how many PSU do you have installed per mobo?

They don't go idle, dealing with that problem hasn't been an issue for a while due to newer drivers. A single 75 ohm resistor in the right place is enough to "dummy" a GPU into running, otherwise.  

What PSU? Any will work, though I suggest you spend money here. Cheap power supplies will cost you more than they save up front. Running two or more per motherboard is not a problem, depends on the PSU prices and line voltage in your area as to which would be the best/cheapest choice (1 or two PSU.)



Line voltage in my area is 240v. What do you think about using Enermax platimax 1500W per mobo? Also on close lookup at your gpu, you didn't use any ohm resistor.

I think Enermax makes a good power supply, here in the US I tend to use Corsair, EVGA, and occasionally cheaper supplies. If it is a good brand name it should be OK and capable of it's rated wattage. Cheap no-name power supplies often can't supply a steady wattage close to their rating, sometimes as much as 20-40% overrated in my experience.

You should try to load the power supply no more than 85-90% full, your mains voltage being 240V means you can probably run 5 250W cards on one PSU. Here in the states line voltage is 110V and generally 15A, so most power supplies are made for 1200W max, or 110V x 15A = 1650W - power supply losses = 1200W so no 5-6 GPU single PSU rigs. If your line voltage is 240V and the circuit can handle 8-10A (240Vx8A=1920W) you should be OK.


I do not have resistors because I do not need them, even in linux.



Please DO NOT send me private messages asking for help setting up GPU miners. I will not respond!!!
herener
Newbie
*
Offline Offline

Activity: 13


View Profile
December 10, 2013, 08:57:56 AM
 #4177

ASICMiner 8 Cube rig.  About 310GH/s.

https://images.weserv.nl/?url=i.imgur.com/MipJ8dq.jpg?1&fnr

-herener
sQueeZer
Sr. Member
****
Offline Offline

Activity: 311


View Profile
December 10, 2013, 09:57:24 AM
 #4178

6000w of PSU Power for that? Cheesy
klondike_bar
Legendary
*
Offline Offline

Activity: 1428

ASIC wannabe


View Profile
December 10, 2013, 03:14:54 PM
 #4179

6000w of PSU Power for that? Cheesy

for the asicminer cubes above? no - 3000W. they are pulling around 260-300W each

24" PCI-E cables with 16AWG wires and stripped ends - great for server PSU mods, best prices https://bitcointalk.org/index.php?topic=563461 also selling 6" M-F-M PCIe splitters and PCIe-PCIe
No longer a wannabe - now an ASIC owner!
ldm314
Newbie
*
Offline Offline

Activity: 11


View Profile
December 10, 2013, 04:41:22 PM
 #4180

My current setup:
  • 20 Block erupter USB
  • 1 Bitfury USB
  • 1 ASICMiner Blad
  • Total: 19.6GH/sec
http://i.imgur.com/2lKZfNu.jpg

Did this help? Now accepting BTC donations: 1MmHtUUmqSX3JiJRPjWSr3FmQm4dy5ds4S
Pages: « 1 ... 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 [209] 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 ... 393 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!